Blood on the mattress is an unpleasant discovery that many housewives face. The spots are striking when preparing the bed for bed, look ugly. How to remove a blood stain from a mattress? The article discusses the most effective ways to solve this problem.
Preparation for cleaning the mattress from blood
Where to begin? Proper preparation of the mattress for cleaning from blood is required. The step-by-step instructions below will help with this.
- Blot the affected area with a thick cloth. You can dampen a terry towel in cold water, and then press it to the stain. Hot water is not used in this case, as this can lead to deep penetration of blood into the fiber structure.
- Next, the surface of the mattress should be wet with a dry cloth. The tissue absorbs not only liquid, but also soaked blood. It is not worth rubbing the place of contamination strongly, this will lead to the growth of a blood trail. It is better to give preference to driving movements.
- Then the terry towel is again wetted with cold water, the above manipulations are repeated.
A simple solution
Dry cleaning of the mattress is a service that many companies offer these days. The customer does not have to worry about transporting the damaged product. At the appointed time, the master arrives at home, inspects the mattress and selects the optimal set of chemicals for processing. He makes the decision, focusing on the type of product and the nature of the pollution.
How is a professional mattress dry cleaned?
- The cleaning agent is applied to the affected area using a professional machine. It pushes pollution out of the deeper layers of filler and tissue.
- If the spots do not disappear, they are treated with a detergent. The fight against persistent pollution is carried out using a specialized stain remover, which does not destroy the structure of the fabric.
- The mattress is washed with clean water, excess moisture is removed. Drying takes 4-10 hours.
Professional dry cleaning is the best solution to the problem. The only drawback of this option is the high cost.
Ammonia
How to remove old blood stains from a mattress with your own hand? To do this, you need to purchase ammonia (3%). The sequence of actions is as follows.
- The affected area is treated with a rag previously moistened in cold water.
- Next, you need to apply a small amount of ammonia to the dry part of the bath towel, and treat the edges of the stain.
- It is necessary to repeat the above manipulation, moving towards the middle of the spot. This will prevent the spread of the trace.
- The procedure is best completed with a vacuum cleaner. The product should dry naturally.
Brine
How to remove a blood stain from a white mattress? Saline solution will help to cope with this task. About 50-60 grams of edible salt must be dissolved in 250 ml of warm water. You should wait until the granules are completely dissolved, and then pour the solution into a container with a dispenser-sprayer. The liquid can only be used in cold form, so you should first hold it in the refrigerator.
The product must be sprayed along the edge of the bloody trail. Ten minutes later, the affected area should be blotted with a towel, moving towards the center. Blood residues are removed with a dry, clean cloth. Manipulation is repeated until it is possible to completely get rid of the bloody trail.
Laundry soap
How to wipe a blood stain from a mattress? Laundry soap is another product with which you can clean the place of contamination. The alkaline composition allows it to easily dissolve blood proteins.
First you need to wipe the bloody trail with ice cubes. Then the affected area is rubbed with a bar of soap. Further, the place of contamination is covered with cling film. About an hour later, the area is treated with a toothbrush, then it needs to be blotted with a wet cloth. Residual moisture is removed with a dry cloth. Vacuuming will help prevent mold.
Hydrogen peroxide solution
A small amount of peroxide should be applied to the damaged area of the mattress. Immediately after this, the bloody trail must be wet with a dry terry towel. Avoid spreading stains easily, you just need to start processing from the edges. Work should be quick, since peroxide can penetrate deep into the cavity of the product.
You can also apply hydrogen peroxide to a cotton pad, and then thoroughly wipe the blood stain. In the end, you should definitely use a vacuum cleaner to remove excess fluid.
Baking soda
How to remove a blood stain from a mattress quickly? Baking soda will help to cope with this task. It is necessary to mix the product with ground salt in a ratio of 2 to 1. The result should be a homogeneous mass. The bulk mixture is filled with water until a pasty consistency is achieved.
The damaged area of the mattress should be moistened with cold water. Then a mass of salt and soda is applied to it. The product must be evenly distributed over the surface of the dirt, then you can begin to gently rub it with your fingers. It is important not to touch the clean area of the product. Then you need to leave the mixture for 30-60 minutes (depending on the freshness of the stain). It is convenient to remove the remains with a paper towel. Next, you need to rub the affected area with a toothbrush and rinse it with cold water. The procedure ends with the treatment of the mattress with a vacuum cleaner.
Dishwashing liquid
How to remove a blood stain from a mattress using improvised means? This can be done using dishwashing liquid. The blood contains protein, which coagulates under the influence of hot water, so the liquid should be cold.
To begin with, it is worth wiping the affected area with ice cubes. To prepare them, pour 50 grams of sage or chamomile with boiling water, cover the composition with a lid, let stand for about 15 minutes. Next, the solution must be passed through a filter of gauze and cotton wool, poured into molds and kept for some time in the refrigerator.
After treating the stain with ice, you need to drop a dishwashing gel on it. It is desirable that the tool has a thick consistency. Next, the affected area is treated with a medium hard toothbrush. Then the area needs to be wet with a bath towel soaked in cold water.
Manipulations must be repeated until the stain completely disappears. Then the area should be wiped with a damp cloth. Further moisture is removed by means of a vacuum cleaner.
Lemon acid
Citric acid is another effective aid in the fight against blood stains. This tool is useful even in the fight against chronic pollution. To prepare the gruel, you need to take two bags of citric acid. The product is dissolved in 20 ml of ice water. The resulting mass is applied to the stain.
About 15 minutes later, the affected area must be brushed with a toothbrush. The remnants of the product can be conveniently removed with a paper towel. Then the treated area is cleaned with cold water. Next, vacuum the mattress.
Shop Facilities
If home recipes do not provide the desired result, you can use store products. Fortunately, the modern market offers many chemicals with which you can easily and quickly clean the mattress of blood. The stain remover must contain ammonia.
The following remedies have proven themselves well:
- Ecover;
- "Vanish";
- Sharma Active
- Frau Schmidt.
Potato starch
How to remove a blood stain from a mattress, what other means exist? Potato starch is a product that will also help in solving this problem. Three bags of the product should be mixed with purified water. Then the affected area is treated with ice cubes. Next, you need to apply the resulting slurry to it. The mass is carefully rubbed into the bloody trail, after which it is necessary to wait for partial drying. It takes about 30 minutes.
Then you need to get rid of excess product, rub the damaged area with a toothbrush. If necessary, the manipulations are repeated. If you are struggling with an old spot, it is better to breed starch with cold lemon juice, and not with water. After cleaning, the product is treated with a wet towel, after which it should be blotted with a dry cloth.
Sea salt
Sea salt can be bought at the pharmacy. It is important that the product does not contain dyes. A handful of salt should be filled with filtered water. Then add a small amount of table salt (approximately 30 grams). The resulting mass is thoroughly mixed, then it should be distributed over the bloody area. Further, the place of processing for 30 minutes is covered with cling film.
After half an hour, salt can be removed with a rag. If necessary, the manipulations are repeated. The procedure ends with a vacuum cleaner.