How to glue the cork on the walls correctly and competently?

Recently, consumers are increasingly switching to environmentally friendly materials that do not adversely affect human health and are safe for the environment. These include cork. With its help, various decorative coatings are laid today, and she herself has long become a facing material.

Particular attention in the repair is usually given to the walls. The mentioned finishing material looks pretty attractive. On sale you can find wallpaper from cork, which has recently become a fashionable trend. This finish has gained its popularity precisely because of the presence of natural components at the base. The cost of the material is higher than the price of ordinary wallpaper, and the gluing technology is different. However, the end result is outstanding.

Glue selection

If you have a question about how to glue a 25 mm cork to the wall, then first you need to understand the main varieties of such compounds. They should provide strength and reliability, as well as guarantee a minimum level of toxicity and optimum setting time. For example, you should not use PVA glue for this, since it will not be able to withstand the weight of the cork. Liquid nails are not suitable for this purpose either.

The best option would be glue "Moment". This composition is versatile and quite durable. It quickly sets, and applying the mixture is quite simple, especially on tiles. But this mixture has its drawbacks, which are expressed in the fact that the layer can deform the cork or even destroy it. In addition, Moment glue is toxic and quite expensive.

When novice masters ask whether it is possible to glue the cork on the wall, they get a positive answer. After that, they begin to look for a composition that would be ideal for such work. Manufacturers specially developed glue β€œMoment cork”. It is not so toxic and resistant to frost as well as water.

A special purpose is also the composition of "Decol Vern". But you must be prepared for the fact that the mixture is highly toxic, so work is best done in a respirator. The chemically active composition should not get on the skin. The material is also flammable. It quickly sets, so the cork must be applied to the surface of the wall exactly the first time.

If you purchased wallpaper from cork, then it is better not to use such glue, since it is better suited for tiles. The most suitable options are Wacol and Cork House. These compounds are odorless, and there are no solvents among the ingredients. The mixtures are environmentally friendly, dry quickly, are moisture resistant and are suitable even for gluing wallpaper from cork.

how to glue the cork on the wall

Tool preparation

Before gluing the cork to the walls, you must study the instructions for use with the glue and the base material. But for starters, you should take care of the presence of a certain set of tools, among them should be highlighted:

  • plumb line;
  • pencil;
  • rags;
  • putty knife;
  • a ruler;
  • construction knife;
  • roller;
  • comb.


how to glue the cork on the wall

As for the technology of work, it provides for surface preparation, marking, gluing of material, as well as cutting of excess parts. From the base, you should first remove all old finishing materials, whether it be tiles, wallpaper or decorative plaster. If cracks form on the walls, they should be disposed of. The same should be done with paint that is behind the surface.

If you were wondering how to glue the cork on the walls correctly, you should know that the base must be cleaned of dirt and dust, and even with plaster. After you can apply a layer of primer and wait for it to dry completely. Cork is completely incompatible with gypsum, so you should not putty or cover the walls with a primer or screeds in which this material is present.

Features of preparation

how to glue the cork on the wall instructions for use

A few hours before sticking the cork, it is necessary to cut the wallpaper and lay them on a flat surface so that they are aligned. Wallpaper cannot be glued deformed. While the canvas is leveled, you can markup and prepare the glue. Getting started is necessary from the window. Marking should be carried out from the same part of the room.

When drawing lines on the surface, you must use the building level. If gluing is carried out according to traditional technology, when the webs are arranged vertically, it is better to use a plumb line. As soon as the entire surface is marked, you can proceed to the preparation of the adhesive.

Cork sticking

how to glue the cork on the wall

If you, too, were among those who wondered how to glue the cork on the walls, then you should familiarize yourself with the technology. In the next step, it involves the application of glue. For reliability, the layer can be distributed over the wall and canvas. But not all adhesives are recommended to be applied in two layers.

Once the mixture is applied to the surface, it is left for 20 minutes to absorb the composition. This will contribute to better grip. The glue layer should not be very thin, since over time the wallpaper can move away from the wall. For reliable fixation, the web is pressed to the surface; for this, it is best to use a roller.

Specialist recommendations

how to glue the cork on the walls step by step instructions

Before gluing the cork to the walls, you should familiarize yourself with the recommendations. They say: gluing is best done butt. The material should not be bent to break in operation, as the veneer is easily covered with cracks. Corners should be given special attention, in their area the material is cut, and it is joined in this part of the room.

If waste is generated, it can be used in places where the wall surface is not accessible to the eye. All excess is cut off with a knife, not with scissors. Before gluing the cork to the walls, step-by-step instructions must be studied in detail. Having familiarized yourself with it, you can understand that the first canvas is mounted according to the marking. Next, glue is applied to the following paintings. While the mixture will be absorbed, it is necessary to process the glued piece with a roller.

All strips are glued back to back, and the remaining glue must be removed with a rag. Excess material needs to be trimmed. As soon as the whole room is ready, it is left for three days to dry the material. Such wallpaper is then covered with a breathable varnish. This allows you to extend the life of the coating and protect it from damage.

The use of self-adhesive wallpaper

how to glue 25 mm cork to the wall

Before gluing the cork to the walls, it is necessary to select the material. It can be self-adhesive, and it is sold in rolls with a length and width of 3 m and 48 cm, respectively. The surface is prepared at the first stage, it is made smooth, clean and dry. It is advisable to do the markup.

After that, the walls are measured, and the sheets are cut into separate paintings. Then a piece of wallpaper is taken, from which a protective layer of 3 cm should be separated. Using the help of a partner, you will need to attach an open part of the material to the surface. This must be done very carefully and carefully so that everything works out the first time.

Final work

is it possible to glue the cork on the wall

As soon as the canvas is fixed, it is necessary to remove the protective film for a certain length to stick the next section. If you are interested in how to glue the cork on the walls, then you should know that after finishing the room it will be necessary to remove air bubbles from under the material. To do this, use a rag, which should smooth the surface. If air does not completely escape, use a needle to pierce the bubble. Then the surface is smoothed with rags.


All Articles