Any owner of a suburban area wants his site to look modern and well-groomed. The external landscape picture will depend on how well the lawns around the house are decorated. When laying a lawn in recent years, the use of lawn grates is quite common. Do-it-yourself lawn grilles for parking with ease.
They are practical, and before acquiring such gratings, you need to decide which kind of design will be most preferable.
Purpose of lawn grates
The main goal of lawn grates is the protection of green spaces from external influences. For this reason, most often such installations are mounted in parking places, as well as near pedestrian walkways. At the same time, the grass is preserved, since the load is distributed on the cell walls. Ultimately, the root system remains intact, and excess moisture passes through the drainage system, which is located under the lawn.
If you began to think about whether you need lawn gratings for parking (do-it-yourself which is easy enough to install) on your site, then you should pay attention to their positive qualities. The lawn grill does not interfere with the use of the lawn mower and makes it easier to care for the lawn.
Varieties of Lawn Grates
Lawn grilles are modules based on the most commonly used plastic or concrete. The first type is considered the most modern, and recently it has gained the greatest popularity due to its attractive appearance and ease of installation. Concrete grass grilles appeared a long time ago.
Among their positive qualities, one can distinguish insignificant cost, durability and long life span. According to the profile, such designs win, since the shape of the modules can be varied, each owner of a suburban area will be able to find something similar for himself.
If you have already decided to install a lawn grate for parking with your own hands, then you can choose plastic structures that are considered the most modern. At the heart of this installation is used high-strength material, which is able to withstand loads of up to 1.2 tons per 1 square meter. The term of use of such a lattice is also large and can reach 25 years. The shape of the plastic grilles can be different.
If you decide to use plastic lawn grills for parking on your territory, you can install them yourself using special locks that provide reliable fastening of the modules in one frame. In this case, you do not need to use special equipment. If there are geometrically irregular sections in the area, then a plastic lawn grill can be laid according to the territorial features of your site. Such designs are very resistant to the chemical effects of petroleum products and acids. Under the influence of ultraviolet radiation, such elements do not melt, in addition, they are not afraid of frost and retain their characteristics and qualities under severe external conditions.
Laying the lawn grate
The do-it-yourself lawn grating for parking can be stacked using the technology below. Initially, preparatory work should be done that involves marking the territory on which the grill is being installed. At this stage, you need to determine the purpose of the future lawn. This can be a regular lawn or one that is supposed to be used as a sports ground, as well as for games or parking cars. Based on the goals, you need to choose a type of lattice. After the site has been marked, it is necessary to remove soil from it.
The do-it-yourself lawn grate for parking is set to a depth that is determined by the height of the gravel cushion - it should be 5-20 cm (the final value will depend on the expected loads). If you need to equip a parking space on the grill, then you need to use this parameter to the maximum. This is due to the fact that situations may arise in which it will be necessary to park not only a car, but also special equipment, as well as a minibus. The leveling layer must be at least 3 cm thick. Please note that the height of the lawn grate is 5 cm. In general, it will be necessary to remove soil with a thickness of 28 cm.
Recommendations for work
Laying the lawn grate for do-it-yourself parking at the next stage involves tamping the soil, as well as strengthening the boundaries of the site. Recent manipulations can be made using bricks and stones, and concrete pouring technology can also be applied. At the next stage, you can proceed to the installation of the lawn grate. First, a backfill should be prepared, which consists of sand and gravel, which will need to be mixed. Sand is needed so that the crushed stone lies sufficiently tight and does not move under the influence of mechanical loads.
On top of such preparation, geotextiles should be laid, which will protect the lawn from weeds and grass. At the next stage, you need to fill the sand with a thin layer, the thickness of which is 3 cm. Geotextile is necessary not only to protect against weeds - it is used as a separating layer.
Features of the installation of the lattice
Installation of a lawn grate with your own hands is made according to a certain scheme. In this example, an option will be considered in which a plastic grill is used. The master needs to pay attention to the fact that on each module there are docking elements, they should be used when assembling the structure into a monolithic canvas. Before purchasing, please note that the dimensions of one module of the plastic grill are 40 x 60 cm.
The final stage
When an ecological parking lot is set up for a summer residence, a lawn grate (which is easy to install with one's own hands) should be laid, and soil should be filled into its cells, which should reach the very top. It is preferable to use light soil - peat or compost is excellent for this. After backfilling, the site should be flooded with water, which will allow the soil to settle. Now you can fill up the lawn grass and roll the surface. Do-it-yourself laying of the lawn grate at this stage is completed.
Now you know how to install a lawn grate in your area.