How to make a do-it-yourself tennis table: sequence of work

how to make a do-it-yourself tennis table
Table tennis is a very exciting game. She helps to relax, in addition, she trains agility, attention and speed. Part of the inventory can be done independently. So, before you begin to follow the instructions "How to make a tennis table with your own hands," you need to prepare all the necessary tools and material. For the main surface, you can purchase a sheet of chipboard, cement bonded particleboard or OSB, the thickness of which should not be less than 2 cm. In addition, you will need a primer (resistant to moisture), putty and paint for outdoor use. The material of the countertop should be dense enough so that the ball can bounce well from its surface.

Before you begin to solve the problem of how to make a tennis table with your own hands, it is advisable to draw a drawing on paper in which to indicate the exact dimensions of the main field, the place of the net, as well as the height and dimensions of the legs. The easiest way to make wooden supports is, although pipes made of metal of small diameter can also be used. They should provide the most even surface level. Place the table should be protected from wind, rain and direct ultraviolet rays. In addition, the base on which the table will stand and the area around it should be well tamped.

how to make a tennis table
When deciding how to make a tennis table with your own hands, you should not neglect some of the nuances of its installation. Care should be taken to ensure that the field rests firmly on its legs. If the structure is on the street, then you should not attach the countertop to the racks, since you will have to hide the table for the winter in the room. For the subsequent correct installation, the lower surface of the field must be marked.

If you do not know how to make a tennis table with your own hands to the end, then read the article further. The last stage of production will be the application of paint and the necessary lines to the surface of the field. So, first, the countertop should be primed with a waterproof agent. If necessary, it can be puttied. Then you need to put a coat of paint on the stove. In this case, you should choose a material for decoration that will not shine - it is better to take a sufficiently dark color. Otherwise, the ball simply will not be visible on the surface of the field.

do-it-yourself tennis table
If you still do not know how to make a tennis table further, then read the instructions to the end. It provides for marking the edges of the table with white paint. The line thickness should be small, only 2 cm. Next, a grid with small cells is set exactly in the middle of the field. Its height should be 15 cm. You can fix it on wooden or metal planks bolted to the plate.

It’s easy to make a tennis table with your own hands, you just need to observe certain sizes. For example, the height of the countertop is 76 cm. The width of the plate should be 1.52 m, and its length should be about 2.74 m.

It should be noted that the table can be stationary or collapsible. The first option is made if the design will be installed indoors. At the same time, all parts of the structure should be fastened with metal brackets. In principle, these are all the features of arranging a ping-pong table. Good luck


All Articles