Motoblock is a professional tool that is used in agricultural work. Using this equipment, you can make a lot, this also applies to the snowmobile, the main thing in this case is to be careful and observe the technology of the work. Do-it-yourself snowmobile from a walk-behind tractor can be done if you prepare some materials and tools, a list of which will be presented below.
Such equipment can be used in the winter as a transportation vehicle, when it becomes necessary to go for firewood or to hunt. The snowmobile has excellent cross-country ability and maneuverability, which acts as its main features. You can perform a snowmobile from a walk-behind tractor with your own hands, while the process of remaking will not be too easy, but it is still possible to carry out these works. You can choose one of the existing methods for carrying out these works, some of them are quite simple, while others are more complex.
Preparatory work
For work, you will need to stock up on a pipe bender. Not always such a tool is in the arsenal of a home master, which is why it can be rented. It will be impossible to make a snowmobile from a walk-behind tractor without using a welding machine, which is why it is necessary to objectively assess your abilities before starting work. A motoblock will act as the main structural element, a manual control tool is perfect for this.
Do not look for equipment of a modern type, you will need to prepare what belongs to the middle class. To make a snowmobile, you will need tracks that will act as a conveyor belt equipped with snow snags. Caterpillars can be easily performed independently, while you can be guided by your own imagination. A snowmobile from a walk-behind tractor with your own hands can be made without tracks, then you need to prepare the wheels.
Features of making a snowmobile
It is necessary to carry out work according to a certain technology, which involves several stages. Initially, a sketch should be prepared, which will allow the assembly to be carried out correctly. Well, if you can make a layout. It is important to correctly determine the design features of the equipment, which will depend on the tasks of the snowmobile. The layout can be made of cardboard, it is preferable to make it full-size.
Features of the manufacture of the frame
Before making a snowmobile from a walk-behind tractor, you need to think about which structural elements can be purchased and which should be made independently. At the next stage of the work, you can do the execution of the frame. For this, pipes are usually used, it is preferable to use frame elements that were borrowed from a motorcycle. This is due to the fact that these components of the vehicle are most reliable when compared with pipes that are designed for laying water pipes.
Making a snowmobile from a walk-behind tractor with your own hands, the photo of which is presented in the article, you will use a pipe bender that will allow you to form the elements of the desired shape. Their fastening should be done using spot welding. Now you need to weld the joints in such a way that an inextricable seam is obtained.
In advance to the frame, it is necessary to strengthen the brackets by using the welding machine, which will be needed to install the motor, seat, and other parts. Before you make a snowmobile from a walk-behind tractor, you need to prepare the seats, which can be ordinary old chairs. From the old bike you need to borrow a handlebar, which is also useful during work.
Ultimately, you should get an excellent motorized vehicle that can fit one or two passengers. In addition, the design will be able to carry a cargo of small mass.
Snowmobile recommendations
After the homemade snowmobile from the walk -behind tractor is completed, you can start using it. However, it must be remembered that safety precautions have to be observed, this will prevent injuries. Thus, you cannot cross frozen ponds with this vehicle.
Alternative Snowmobile Manufacturing
A homemade snowmobile from a walk-behind tractor can also be manufactured using a slightly different technology, while using a motor borrowed from the above equipment. Before assembly, it is preferable to prepare the Neva walk-behind tractor, which has a Japanese motor. In the vast majority of cases, the equipment has a four-stroke gasoline single-cylinder engine, which has air cooling. However, two-stroke engines can also be used, since they have a small mass. If you make a vehicle using such a motor, then you will get a design that can be easily repaired and can be started manually.
Snowmobile Features
A snowmobile from a walk-behind tractor will be able to accelerate to 70 kilometers per hour. However, in this case, the assembly work should be approached professionally. This will result in a snowmobile that will be able to overcome snow jams. On such a unit, it will be possible to plow the land, go to the forest, go hunting or fishing, and also just ride. Fuel will be consumed in small quantities, thus leaving about 2 liters per hour.
Specialist recommendations
It is preferable to carry out a snowmobile from a walk-behind tractor according to a scheme that assumes the presence of two skis (they will be located in front), as well as one track - at the rear. This design has a higher stability.
Another option for making a snowmobile
To begin with, you will need to take the main components of the future design. Next, the motor is mounted on a tracked engine. Two rods will need to be fixed to the tracked motor. Traction must be attached to the cross beam, as well as the steering wheel and ski. Between the rods, mount the seat as well as the front pillar. When making a snowmobile from a walk-behind tractor with your own hands, the drawings of which should definitely be studied before starting work, it is necessary to use pins and bolts that will strengthen all parts of the unit. On this we can assume that the snowmobile is ready.