Perhaps, all parents sooner or later have to do the teepee for their children with their own hands. This structure is in the form of a cone, consisting of a simple frame and a coating stretched from above. There is no need to completely cover the entire structure. In the upper part, the real Indians always left a hole so that the air circulated better and sunlight penetrated into the room.
Such designs do not take up too much space, and if you install the wigwam carefully, make it folding, you can easily move it to some other place or simply remove it. The degree of proximity of a home wigwam to the original design will depend on parental imagination and considerations of expediency.
Selection of materials
In the process of choosing suitable parts, one should not forget about decorative elements, pillows and bedspreads, which will give home wigwam great practicality. Garlands, pompons, feathers, beads, pebbles and even appliqués will serve as wonderful decorations if parents build their own teepee for children.
Interesting features of the wigwam
In children, such designs are a real delight. When the need arises, any lodge is easy to assemble, disassemble and move the hut to any convenient place. Wigwam can be installed on the street and in the children's room. Caring for such huts is very simple. Wigwams are not afraid of dirt or stains, because if necessary, you can simply remove the coating from the frame and wash it. You won’t have to think long about how to make a lodge for children, because the technology of creation is elementary. All manufacturing steps will take several hours.
How to sew a wigwam for children?
Stock up on thin bamboo or ordinary chopsticks if you plan to install a wigwam in a living room. Their optimal number for the most spacious hut - nine pieces. In the place of the supposed intersection, these rods must be fixed with a rope. The rods are installed not pressed against each other, but tilted 25 degrees so that a figure resembling a cone is obtained. Then you need to fix the base with additional sticks, tying them to each rack. To get the wigwam as high as possible, you need to use the bars more authentically. For a better bundle, you can drill holes in them and draw a rope there.
At the next stage, you will need to determine the coating of the structure. To do this, use simple pieces of fabric or a specially stitched case. To make the latter, you need a wigwam pattern for children. The sewing process is very simple and does not require special skills. The segments of such a cover have the shape of triangles. To calculate the required dimensions, measure the openings between the rods.
Jewelry
In accordance with the style of the wigwam, decor elements are prepared. Tulle or cotton fabric is often used in such cases.
Designing the entrance
To properly make the entrance to the wigwam for children with their own hands, on the outer edges of the cover you need to cut two semicircles at the same distance from a small central smoke hole. These holes will connect during the assembly of the wigwam and form a convenient entrance. To make the door to your teepee, you will have to cut a piece of fabric, the diameter of which is slightly larger than the hole for the entrance, to hem its edges, while inserting some rounded twig to hold the desired shape. A loop must be attached to the resulting product. This makes it possible to keep the door on some stakes after installing the wigwam.
Additional mounts
To make a good wigwam for children with their own hands, you need to provide a way to connect the fabric with the frame. Additional loops are attached to the lower edges of the case if it is planned to install the lodge in the street. They will contribute to good tension. Also, additional fasteners need to be built in the central semicircle and at the places of contact with the rods, so that the cover rests on the frame as best as possible.
Top and bottom of the wigwam
To cover the hole in the center of the wigwam, two triangular pieces of fabric can be used. The short side they are sewn to a semicircle on opposite sides. Such a device can be used as a chimney and protect the wigwam from rain.
A five-centimeter piece of rope can be attached to the center of the straight edge in a semicircular recess for connecting wooden rods with a tarp. Tent pegs must be stuck in the ground and connected to the lower edges of the cover. Inside the wigwam, you can place the two remaining circles. They will help to remove smoke from the hut when the bonfire flares up. Now everyone can understand how to sew a teepee for children with their own hands.
What rods can I use on the street?
To find out how to make your own teepee for children on the street, just read the material below. First, we will deal with the elements of the frame, without which it will not be possible to do. You will need a rope, long enough branches or PVC pipes. You can also use ordinary climbing vegetation.
For the construction of the frame in the yard, you can use sunflower stalks. You must first plant them in the spring in a circle specially drawn on the ground. It’s no big deal to make do-it-yourself teepee for children from plants. Photos of such buildings are presented in the article.
It should be noted that these huts are not used immediately, but after some time. You can begin to build them in the early spring. Pipes or branches must be installed in the shape of a triangle, and then connect the top with a rope. After assembling the frame, you can start sowing seeds. In a circle of the planned design, it is necessary to plant abundantly climbing plants. When the bushes begin to rise, it is necessary to adjust their further development in accordance with the shape of the frame of the hut.
PVC pipe hut
From PVC pipes, you can also build teepees for children with your own hands. Patterns for the cover are created on the same principle as in the above examples. In fact, such a wigwam differs only in the material from which the frame elements are created.
Using a ladder
The function of the frame for the wigwam will be performed by an ordinary stepladder. It is enough to just put the ladder in a place reserved for children's entertainment, and cover it with some kind of cloth so that access inside is only on one side. The stepladder can be installed both in the house and in the yard. This design variant of the wigwam is notable for its mobility.
Conclusion
All children need space for fun and games. A wonderful solution for this will be a do-it-yourself hut. The technology of the construction of the frame is not complicated and can be implemented by everyone. The wigwam pattern for children is also very simple, so a suitable cover is easy to create.
If this is not possible, you can hang on the frame ordinary pieces of fabric, tulle, curtains and the like materials that are at hand. You don’t have to spend a lot of money and time on this. You can install such a hut in the house, in the country and in any other convenient place. For greater practicality, you can design a special shelter from the rain, a door and smoke exhaust devices. Thanks to the materials presented in the article, each parent can learn how to make the teepee for children with their own hands correctly.