If during the construction or repair activities it is not possible to protect the window panes from the primer, it is important to find out how to remove the substance from the surfaces. There are primers that are easy to wash off with plain water. Others, by contrast, are problematic to remove even with specialized cleaning products. Consider the most practical, effective solutions that will answer the question of how to wash the primer from the glass?
What is a primer?
Before we figure out how to wash the primer from the glass, let's figure out what constitutes a substance? This type of material is widely used in construction and repair for adhesion coatings. After water evaporation, the primer undergoes polymerization, hardens and becomes difficult to dissolve. Therefore, it is extremely important to understand in advance how to wash the primer from the glass? We will try to answer this question later in the material.
Primer cleaning tools and instruments
How to wash the primer from the glass? You can use the following tools to fix the problem:
- solvents (acetone, white spirit, etc.);
- water;
- household detergents;
- concentrated chemical compounds;
- folk methods (vinegar essence, baking soda);
- blade, scraper, abrasive sponge, washcloth.
Next, we consider the feasibility of using and the effectiveness of the tools presented, depending on the type of primer that hit the glass surface.
Primers for wallpapering
Quite often, before moving on to wallpapering the walls, the masters resort to surface treatment with special primers. It is immediately worth noting that such substances are washed off without unnecessary problems, especially if the cleaning is carried out before the moment of complete hardening.
How can I wash the primer from the glass? In this case, it is enough to use any wet rags that were at hand. It can be a wet rag, washcloth or sponge.
If the primer for wallpaper had time to freeze on the surface of the glass, do not immediately resort to the use of abrasive materials. In such a situation, it is recommended to moisten the spots and stain to swell. As soon as the primer softens, it is worth erasing the traces with the same sponge or piece of fabric.
How to wash acrylic primer from glass?
The presented type of materials, as well as compositions of the above category, are easily removed from smooth surfaces - glass, tile. The resulting contaminants need only be thoroughly wetted with water. After some time, the
acrylic primer softens and can be removed without the use of chemicals.
The exception is the compositions that contain dyes. In this situation, you have to resort to surface treatment with white spirit. Pre- processing of glass with hot water allows you to cope with the task faster.
How to wash a deep penetration primer from glass?
The primers of deep penetration include substances containing phenols. The latter are used mainly for wood impregnation. When such compositions get on the glass surface, their final polymerization occurs in less than a day. If the phenolic primer has not been removed before this time, cleaning will have to resort to the use of chemical solvents. Here comes to the rescue: solvent, xylene, all the same white spirit. For greater effectiveness, these funds can be mixed with each other in equal proportions.
Glass cleaning from traces of a deep penetration primer is performed as follows:
- glass is moistened with warm water;
- a solvent is applied to the spots;
- after a few minutes, the surfaces are gently wiped with abrasive material, avoiding strong pressure;
- these operations are repeated in the same sequence;
- at the end, the glasses are cleaned with any rags or a soft sponge.
How to remove the adhesive primer from the glass?
Substances of this category are intended for the impregnation of surfaces in order to improve the adhesion between the base and the materials used in the decoration. Such compounds are not soluble in water and very quickly undergo the polymerization process, forming a stable bond with surfaces. Therefore, removing them is extremely difficult.
How to wash the primer from the glass? The only effective solution for removing hardened adhesive from windows is the use of mechanical cleaning methods. For these purposes, it is best to resort to the use of a thin blade. It should be held at an angle of about 45 °. When passing along the surface of the glass, it is necessary to try to hook the primer spots with the sharp edge of the blade. After removing the flaps of the hardened substance, it is advisable to clean the contaminated area again.
Organic solvents can help ease the mechanical removal of contaminants . Products of this category contain esters, which partially neutralize the adhesive properties of the primer. Preparation for glass cleaning using organic solvents is carried out according to the following scheme:
- a piece of matter is wetted by the etheric composition and applied to the spot;
- after about half an hour, the rags are removed from the glass;
- the formed jelly-like structure is removed with a blade or a spatula;
- the glass is wiped with a soapy sponge and then with a damp cloth.
The use of strong cleaning compounds
In cases where the implementation of the above solutions does not give the expected result or the type of primer is unknown, you should rely on "heavy artillery" - household chemical compounds that are used to remove problematic, persistent contaminants.
Among the most effective cleaners, it is worth noting the following tools:
- Veroclean.
- Powerfix
- Hodrupa.
- Atlas Zsop.
- Dopomat.
- Corvett.
All substances, in addition to the acidic Powerfix agent (effective in cleaning ceramic tiles), are alkaline in nature. Given the high concentration of chemical components in their composition, it is recommended to work with them when cleaning glasses from the primer with gloves and goggles.
Folk cleaning methods
As improvised, household tools to eliminate stains of primers from glass, often use boiling water, a bite and baking soda. Contaminated surface is treated with hot water. Next, undiluted vinegar is applied to the spots. After 10-15 minutes, it is washed off, after which the softened traces of the primer are wiped with baking soda. As a rule, to completely clean the surfaces, the procedure has to be repeated.
Finally
In order not to burden yourself with finding the answer to the question of how to wash the primer from the glass, it is important to minimize the likelihood of the formation of persistent contaminants during construction or repair activities. To do this, you must first close the window openings with plastic wrap. It is advisable to seal the joints with tape or cover with masking tape. All this will allow you to avoid doing unnecessary work.