Vibrating tables for paving tiles with their own hands. Drawings, instructions

Today, many citizens would probably like to have a summer house or a private house, on the territory of which there is a well-kept lawn and attractive paths. If it is not possible to allocate an impressive amount from the budget, but there is a desire to equip the exterior of the site, then you can make a vibrating table for the production of tiles, which will create material for arranging the tracks.

Description of vibrating table

do-it-yourself vibrating tables for paving slabs

The described construction is simple, it is simply indispensable for the independent production of paving slabs. This device will allow you to make products of different shapes, while concrete should be used as material.

Do not assume that the vibration table can only be purchased in specialized stores. You can make such a design yourself. The base plate is the base plate, which is attached to the steel base by means of a movable joint. Among other things, you will need an engine that will drive the surface in motion.

In the process of vibration of the plate from the molds that are filled with concrete, bubbles come out. This is the only way to ensure proper product quality. When making vibrating tables for paving tiles with their own hands, it is necessary to ensure the perfect evenness of the countertop. It should be smooth, and the engine used should provide uniform vibration.

Preparation of tools and materials

how to make a vibrating table do it yourself

For work, you will need a steel pipe in the amount of 4 pieces, a metal sheet that will form the basis of the countertop, as well as a metal spring - it will become the movable joint. The master needs a corner with dimensions of 50 x 50 mm, which can be replaced with a channel profile. Take care of having an engine that will have the right power. When vibrating tables for paving slabs are made with their own hands, specialists prepare a welding machine, drill, and also a grinder. To install the engine you will need 4 bolts.

Manufacturing technology

Despite the fact that the vibrating table is a simple design, the process described below should be guided in the process.

The base on which the countertop will be fixed should be made from a corner or channel. The dimensions of the vibrating table can be completely different depending on the desire of the master. We will take standard sizes, which are limited by parameters of 700 x 700 mm. If you decide to use other dimensions, you must remember that they must match the power of the engine used.

When vibrating tables for paving tiles are made with their own hands, craftsmen use pipes that act as legs. They should be welded to the base. In order to ensure maximum stability, steel plates must be welded to the legs and reinforced with concrete. If this stage is excluded, then the table during use will move from place to place, while the stability of the structure will be in doubt.

The height of the table must be selected individually, however, it is important to ensure the convenience of working with the design. Among other things, the engine must be at a certain distance from the ground. If you make vibration tables for paving tiles with your own hands, then in each corner from the central part you should weld the springs. Ideally for carrying out these works, those parts that are borrowed from a moped are suitable. First they need to be cut in half.

Work Tips

vibration motor for vibrating table

A sheet of metal should be laid on top of the spring. Use material that has a thickness of eight millimeters or more. Bolts will be needed to fix to the engine sheet. If you follow these recommendations, you will be able to make a table that will help to produce up to 60 square meters of products during the day.

Engine selection

vibrating table for tile production

Before you make a vibrating table with your own hands, you need to think about which engine will be used. The one that is borrowed from the washing machine is quite suitable for this. Despite the fact that it works properly, it has a rather significant drawback, which is its fragility. Such a motor is capable of withstanding only about thirty duty cycles. After that, the axis loosens or the bearing wedges. That is why there is an opinion expressed by home masters that such engines are not able to hold out for a long time under conditions of increased loads, which turn out to be a vibrating table.

As an alternative solution, you can use a vibrator brand IV-99 E at 220 volts. It is sold in stores of related products for 6,000 rubles. Such a design copes quite well with the tasks assigned to it.

Among other things, it is important to prepare a drawing of the vibrating table, it will help complete the work correctly.

vibration table drawing

If you will draw up a similar circuit, then it should indicate the location of the AC potentiometer, which will regulate the force of vibration. In the process of changing the voltage level, it will be possible to adjust the oscillation frequency to a specific type of solution used. However, many craftsmen, thinking about how to make a vibrating table with their own hands, decide to save, using only the engine.

Work Secrets

springs for vibrating table

It is important to make a table that is not only durable, but also sufficiently resistant to vibration. Only in this way will the design be able to endure the exerted loads. The engine must be installed in a specific place. Sometimes it can only be determined empirically. The countertop will consist of a rectangular frame and steel sheet. It is sometimes provided with an additional frame on which the source of vibration is fixed. The springs for the vibrating table will provide limited mobility to the countertop, so their choice should be taken seriously.


In addition to the mentioned springs, it is permissible to use hinges made of a strong harness. A rope will do. Four such joints located at the corners of the base will allow you to center the platform on top. When choosing a vibrating motor for a vibrating table, you should take into account that it should not provide an excessively strong displacement of the countertop relative to its original position. Otherwise, it will not be possible to exclude the spillage of the solution, which was distributed in the forms. That is why it is recommended that you first consider factory models.


All Articles