Wood has long been one of the most popular materials in the field of construction. Log houses are built from it, interior items and window frames are made. This list is far from complete. The material is environmentally friendly, with its help you can create an atmosphere of coziness and comfort indoors.
Why choose a picket fence
Wood can also form the basis of a fence from a picket fence, which acts as one of the common types of fences, which is especially true in the issue of suburban construction. With the help of such a fence, you can mark the boundaries of the site without obscuring the territory. By building a fence from a wooden fence with your own hands, you can give it any shape and height. The distance between the elements can also be individually selected, thanks to this the design acquires an original and attractive appearance, complementing the exterior of the suburban area.
The popularity of such a fence is due to several parameters, among them:
- universality;
- ease of installation;
- convenience of leaving;
- reliability.
Additional advantages
Making a fence from a wooden fence with your own hands, you can fit the design into any landscape. It combines perfectly with other materials and looks organically even with products made of brick, stone, metal and concrete. To establish such a fence is quite simple, such work is within the power of any owner of the house and a summer resident. You will not have to resort to the help of professionals.
Caring for such a fence is quite simple. Its surface can be painted and, if necessary, replaced with some elements that were damaged during the season. Making a fence from a wooden fence with your own hands, you can create a rather high structure, which will be a reliable protection of possessions. One of the main advantages of the picket fence is the possibility of planting plants at its base.
Preparation of materials
In order to build a fence, some materials should be prepared, among them:
- supporting posts;
- picket;
- veins.
Pillars can be made of thick bars or metal pipes. As for the picket fence, it looks like individual rails, the width of which is quite small. You can make shtaketin from planed or edged boards. Cross strips for the fence will be located horizontally, their length should be equal to the limit of 2 to 2.5 m.
The veins will be based on bars, the cross section of which is 40 mm. If you decide to make a fence of a wooden fence with your own hands, then the material can be purchased ready-made or done independently. The first approach saves time. The fence can be installed on the day of purchase. However, raw low-quality wood, which formed the basis of the picket fence, can serve as a minus.
If you have the time, then you can make a picket yourself, having spent several days on it. You can guarantee the result. First you need to determine the length of the fence, the step between the supports, the height of the structure and the size of the fence. If you decide to purchase lumber, then preference should be given to well-dried products. When the material is prepared independently, the craftsmen usually saw and process the top with a sandpaper. The supporting poles made of wood from below are treated with hot var. This will eliminate rot and significantly extend the life of the wood.
Installation of fencing
Do-it-yourself wooden fence fence , a photo of which you can see in the article, is made on the basis of support pillars. But to begin with, the territory in the direction of the fence should be freed from tree branches, bushes and weeds, which can interfere with construction. Laces are stretched on the site and places for installing poles are marked. The distance between them should be 3 m or less. If the spans are made too long, then the cross-members may sag under the weight of the shtaketin.
Supports are usually installed in the ground, but if you want to make the structure more durable, you should use the technology of pouring mortar from cement and sand. Making a fence from a wooden fence with your own hands provides for the installation of supports on a gravel pillow, which will exclude the extrusion of pillars during freezing of the soil. Columns should be fixed vertically, falling asleep with layers of soil and concrete.
The poles should be located as evenly as possible along the course of the fence. Streaks are sometimes established between them. Installation of the fence is usually carried out according to one of two methods, the first involves fixing the cross-members between the supports, as well as installing the picket fence. The second technology involves the assembly of spans separately, after they are attached to the supports in blocks. Usually the step between the shtaketin is equal to the width of the boards. Cross strips are fixed on wooden poles using self-tapping screws, nails or bolts. The veins are attached to metal posts with corners for fastening the beam.
Pole Installation Recommendations
Before starting work, be sure to read the instructions. Do-it-yourself fence made of wooden fences is assembled only after the installation of poles. In place of the pegs that are driven into the ground at the marking stage, dig holes. Their depth should be 50 cm or more. When installing the supports, you should not trust the eye, it is better to use a plumb line or level. The bottom of the pit should be concreted. In order to prevent the pillar from buckling, it is recommended to make temporary struts that will hold the product until the mixture hardens.
Assembly Tips
If you are thinking about how to make a fence from a wooden fence with your own hands, it is important to get acquainted with the technology of assembly of structures. To begin this process is necessary only after the pillars are held securely in the concrete mixture. To do this, after pouring, you need to wait about 2 days. Further work will resemble the assembly of the designer.
Mounts are mounted on poles. The veins are fixed to the fasteners with screws. At this stage, it is necessary to note the places where the picket should be located on the veins. Use for this should be a marker or pencil. This will allow you to monitor compliance with the distance between the elements of the picket. To screw the rails it is better to use a screwdriver.
Fence Finish
Before starting work, experts recommend getting acquainted with ideas. Do-it-yourself wooden fence fence can look very original. In many ways, its appearance is determined by the decorative finish. In addition, applying a protective layer allows you to extend the life of the structure. If we are talking about freshly-planked boards, then it is not worth using film-forming agents, since they do not go well, but do not last long. It is necessary to clean the surface of the wood with medium-sized sandpaper. Applying varnish will protect the material from moisture. You can use its transparent variety or stain.
For reference
Do-it-yourself installation of a wooden fence fence may include the use of supports made of different materials, including:
- wood;
- metal;
- concrete;
- brick;
- a rock.
In any case, the same distance must be observed between the elements, the finished sections will be located between the supports. For additional rigidity, the posts can be supplemented with bases in the form of stops that will go to the side. After pouring concrete and solidifying it, the resulting recess can be filled with soil.
Conclusion
Quite often, recently, a metal fence has been used to make a fence. It has a polymer coating, so it does not need staining. But if you want to make the exterior more natural, then it is better to use wood, it is covered with stain and special antiseptic agents at the final stage. Thus, it will be possible to preserve the natural color of the material and exclude the impact of negative factors on it.