Perhaps today you will not be surprised at the presence of a washing automatic machine in a modern apartment. These home helpers have firmly entered the lives of many people. Modern technologies make it easy to load dirty laundry into the tank of the washing machine, fill in special detergent, choose the necessary washing program and after a while get clean things.
But this is only at first glance everything is so cloudless. In fact, every owner should know the basic methods and recommendations for cleaning the filter in the washing machine. Compliance with these rules and recommendations will extend the trouble-free operation of the unit for many years.
Timely cleaning of the washing machine filter is a must, as blockages can lead not only to the unpleasant smell of washed laundry, but also to more serious damage to the unit.
Purpose of washing machine filters
Washing machines of modern manufacturers are equipped with two filters: inlet and drain.
A special drain filter is present in any washing machine, and it is associated with the pump of the unit. Its main function is to treat water during washing so that small objects and various debris cannot get into the tank.
The filling filter is not installed on all models of washing machines. Structurally, it is a grid on which various impurities settle. The main function of this device is to clean the water entering the machine from tap dirt.
Regardless of the model used, each owner should know how to clean the filter in the Indesit washing machine. This simple operation must be performed regularly.
Signs of a clogged filter
A clogged filter is considered a malfunction of the Indesit washing machine , which may cause it to stop or to function improperly. The main signs of a malfunction of the unit are:
- After the washing or rinsing regime, the water is drained very slowly, and with dense clogging it can stop altogether.
- During the washing process, the machine stops the program and does not resume it even after restarting the system.
- The control unit gives a signal about incorrect operation or displays an error code on the display, which is individual from different manufacturers.
- Spin or rinse does not start.
- Bad smell from the washing machine, which soaks the washed items.
- If the filter is not cleaned in time, it can cause the pump to break, and it will stop pumping water.
Also, if the drain filter of the Indesit washing machine is clogged, an unusual extraneous sound may appear that accompanies its operation.
Filter location
Determining where the filter is located in the Indesit washing machine is not difficult. The inlet filter is usually located at the point where the water supply hose is connected directly to the unit.
A drain valve is located at the bottom of the unit, it can be found under the filter cover of the Indesit washing machine. Often this important node is located, regardless of the type of unit loading, from the bottom right. In some models, it can be hidden under a decorative panel. Before removing the panel, it is recommended that you read the user manual, which indicates how the protective strip opens. Sometimes it is attached to swivel hooks or shifted to the side, so before removing the filter on the Indesit washing machine, it is better to familiarize yourself with the method of removing the decorative panel.
You can remove the panel by gently prying it with a flat screwdriver or scissors. Most often, manufacturers of the Indesit company make a part from black material, so it is very easy to find.
Filter extraction technology
The drain part is made of very thin plastic material. Therefore, before removing the filter from the Indesit washing machine, it is necessary to gently pry it with a screwdriver on both sides and remove it only when it starts to move out of the hole, excluding any effort.
You can remove the standard filter from the slot by turning it a couple of turns counterclockwise. Then gently pull it towards you. Remember that no matter how the water pump works, there is still liquid inside. Therefore, before cleaning the filter in the Indesit washing machine, place a dry cloth under the panel that can absorb water. This simple action will save you the trouble of fluid leakage on the floor surface.
How to clean the inlet filter
Structurally, the inlet filter is a special mesh that can trap sand or rust present in the incoming water. Not all manufacturers install such a device on their models, but if it is present, then you need to know how to clean the filter in the Indesit washing machine. If this operation is ignored, the flow of water into the tank may be stopped.
The procedure for cleaning the inlet filter is as follows:
- We disconnect the washing machine from the mains.
- We turn off the water tap.
- Carefully disconnect the water supply hose, which is located on the back of the unit. We do this procedure carefully, trying not to lose or damage the rubber gasket. First, we place a container under the hose to collect water that may leak from the sleeve.
- Then you need to remove the filter itself from the pipe. This can be done with pliers.
- Under a stream of water with a small brush, we clean the filter mesh.
- If there is an additional mesh, it must also be cleaned.
- After completing all the operations, install the parts back.
- The last step is to install the hose in its original place. Then we open the water supply tap and carry out a test run.
The frequency of cleaning the inlet filter depends on the quality of tap water and the number of washes.
Cleaning the drain filter
More serious malfunctions of the Indesit washing machine may occur due to clogging of the drain filter, which is installed in all models. The algorithm of actions is as follows:
- We dismantle the plastic decorative panel at the bottom of the unit.
- We remove the remaining water. For this, some models are equipped with a special hose. In its absence, you can use the means at hand (basin, rag).
- Turning counterclockwise, unscrew the drain plug.
- We remove the filter from the location.
- We clean the filter device from contamination.
- It is advisable to clean the connecting pipes where rust and dirt can accumulate.
- After carrying out these operations, we assemble the assembly in the reverse order.
If you cannot remove the filter, you can clean the drain system through the pump. To do this, lay the machine on its side and remove the pump. Next, disconnect the pipes and clean.
Methods for cleaning the filter device
Before cleaning the filter in the Indesit washing machine, it is necessary to familiarize yourself with the recommended methods for performing this work.
There are two main methods:
- The mechanical method is to remove large particles with a fine brush (you can use a toothbrush). More productive is the removal of dirt and rust under running water.
- The chemical method involves the use of citric acid to remove limescale and the musty smell of the filter element. A better result can be obtained after soaking the part in the solution for several hours.
Also pay attention to cleaning the drain hole, where debris can also accumulate. For the convenience of detecting pollution, you can highlight a flashlight.
Tips for proper machine operation
In the instructions for use of the washing machine, manufacturers try to indicate the main points of cleaning the filters. Knowing these recommendations will save you from many troubles:
- Clean the filter at least once every three to four months.
- Try not to leave wet things in the drum for a long time that could lead to the growth of fungi and mold.
- Use a good quality detergent without any impurities.
- Be sure to disconnect the unit from the power supply during cleaning.
- Avoid cleaning the filter with rags with a large pile.
Compliance with these simple methods of prevention will extend the trouble-free operation of the washing machine. Any housewife who carefully treats her assistant can perform filter cleaning operations without the help of specialists.