Brickwork can make the interior unique and give it a twist. If we are talking about external cladding, then it can be done using different types of bricks. Whereas it is not always possible to use such a heavy finish indoors, because the additional load on the ceiling can lead to adverse consequences.
But there is a way out - you can use an imitation of a wall under a brick, with your own hands it is quite possible to carry out such work. This finish can be done in several ways. The final result will depend on the imagination and your own preferences.
Training
Before starting repairs it is necessary to take care of the availability of appropriate devices that will be needed for decorative cladding. Depending on the method chosen, the list may vary, but in general you will need:
- paints;
- gypsum;
- brushes;
- glue;
- soap solution;
- level;
- petroleum jelly.
You should also take care of the availability of forms for decorative bricks. Size is chosen at your discretion. The walls and bottom of such a product should be smooth. Moisture-resistant plywood can be used for the mold. Fasteners should be located outside. Seams are filled with moisture resistant silicone sealant. You will also need a container where you will mix the mixture.
The easiest way to simulate masonry
The most common option for decorating a wall in the described way is protruding cladding elements on plain wallpaper. With your own hands, walls under a brick and from plaster can be completed. The technology remains the same. You can use a painted wall as a base. The volume and realism of the masonry in this case are out of the question, but this method has several advantages.
Firstly, to perform such work is quite simple. You will need to draw on the basis of the required number of rectangles with seams, after all the elements are painted in the desired color. One cannot but mention universality. Bricks and seams are depicted in order to obtain the dimensions of the products that are most acceptable, in your opinion. If you make a wall under a brick in such a way with your own hands, you will get another advantage, expressed in budget. Money will have to be spent only on the purchase of paints and brushes.
But this method of imitating a brick wall with your own hands has its drawbacks - the cladding is not very natural, so this type of cladding is most often used in residential premises like a dressing room or a relaxation room in a bathhouse. For living rooms, it is recommended to choose a more effective method of imitating masonry.
Performing decorative gypsum bricks
If you want to make a wall under a brick with your own hands, then you can use gypsum as a material. Products will be homemade. But such work requires special skills and some financial costs from the contractor.
First you will need to prepare a form for the bricks. The thickness of the element can be a limit of 5 - 20 mm. If the brick will have a lower height, then it will quickly break down, while the use of more impressive dimensions will cause the plaster to overuse the grout.
When using too large bricks, it also visually reduces the area of the room. At the next stage, you can start preparing the solution. To do this, dry gypsum with water should be diluted to a state that resembles thick sour cream. The form prepared in the previous step is lubricated with a soap solution or petroleum jelly, and then filled with the finished mass. Alignment should be done using a standard ruler.
The form is left for half an hour, and then turns over. Ready-made cladding elements can be removed from it. The brick can be left untouched or painted in the desired color. To obtain the desired shade, sometimes the products are painted in several layers. If desired, and to protect the brick from moisture, you can cover it with varnish.
Cladding
Before you begin to make a wall for a brick with your own hands, you must apply markings on a separate surface area. In the lower part, the starting line is laid off, which will point you to the place where you should begin to lay stones. For fixing bricks, use special glue or a mixture for laying tiles.
The first row is laid out in accordance with the width of the seam, all subsequent rows must be mounted in a checkerboard pattern. To distribute the adhesive on the wall surface, use a notched trowel. For a greater effect, you can break the extreme bricks in each row so that their edges look uneven and torn. Finish for drying leave for up to 3 days. You can find out the drying time of the adhesive by looking at the instructions on the package.
Instructions for decorating a wall of foam bricks
If you want to know how to make a wall under a brick with your own hands, then you should be wondering what polystyrene is suitable for this. The recommended size of such bricks is 150 x 70 mm. If you use elements of a larger size, they will look unnatural.
Bricks are made quite simply. The tiles should be marked, which will help the gel pen. It is necessary to leave allowances for tile joints. Smooth straight lines are squeezed with a toothpick. In order for the cladding to look realistic, it is necessary to make a crush. To do this, use a lid from a tin can, from which a flat strip is cut. From one of its edges it is necessary to cut off the edges, performing a kind of sting for 2 mm. With it, you can form a marking line.
If you wondered how to make a wall under a brick with your own hands, then you should study the technology of the work. At the next stage, the selected surface area should be faced with previously made bricks. All the same tile glue is used for gluing. It is necessary to begin work on installing the finish from the bottom edge, while the seams are not filled. A gap of 2 mm is left between the bricks. The finished lining is painted, and an increased amount of paint should be applied to the gaps. So you can create the most realistic imitation of masonry.
Tips from a specialist on creating an imitation of a brick wall of wood
Before starting the repair, as professionals say, you need to see a photo of the walls under a brick. With your own hands in this case, to cope with the work will be easier. From the images presented in the article, you can find out that the brick cladding can also be made of wood. If you decide to use this particular material, then you should purchase raw materials. Perfectly, according to the masters, plywood.
The workpiece is cut into the desired number of rectangles of the same size. The front side of the elements must be sanded. Marking is done on the wall. Bricks must be laid out according to the markup. Finished masonry is painted or varnished. The imitation of such a wall, according to experts, is not only durable, but also environmentally friendly.
Technique of imitating masonry from tile adhesive
We decorate the wall under a brick with our own hands, performing the cladding of dry tile adhesive. To do this, the powder is diluted in water to obtain a mixture whose consistency resembles thick sour cream. The resulting mass is divided into identical parts, to each of which it is necessary to add a certain amount of pigment. The coloring components must have different shades.
Each of the three parts is stirred. As a result, you should get a lot with interesting stains. The compositions are rolled into pancakes, from which individual bricks with the same dimensions should be cut. They are left until dry. The above steps should be repeated until you get the right amount of bricks.
The wall is faced in the next step. For fixing, you can use tile glue. If you want to make such a decorative wall under a brick with your own hands, then at the next stage you will need to fill the seams with a special compound. It is better if this mixture is slightly darker than the cladding elements. The next step is to coat the finish with two layers of varnish.
Finishing
At the previous stages, technologies for the finishing of each considered type of masonry simulation were described. But you can apply a universal method with which you can achieve a shade similar in color to a real brick.
To do this, mix light and red ocher. The next step is to add a certain amount of white to the resulting mixture. Decorative masonry is processed using the plugging method. To do this, use a sponge that dips into the prepared thick mixture. With its help, the composition should be distributed over the lining.
Brown ink is sprayed onto the cladding with a toothbrush. In order to achieve a more natural looking finish, you can use different methods of applying paint for each row. The coloring compositions are applied by tampon. In this case, shades can be alternated from row to row. At the final stage, the imitation of the masonry is covered with several layers of varnish. If there is a desire, then the lining can be made matte by treating it with sandpaper with fine grain.
Using cardboard to create simulated masonry indoors: preparing tools and materials
A decorative wall for a brick with your own hands can be made with the help of such an unusual material for this as cardboard. In addition to it, you should prepare:
- PVA glue;
- paper napkins;
- pencil;
- paints;
- a ruler;
- stationery knife;
- varnish;
- brushes.
You will need a glue thermo gun. Cardboard must be thick, it can be taken by dismantling the packaging boxes. Before doing a wall decor for a brick with your own hands, you should take care of the presence of rods for a thermal gun. As for napkins, they should be tight. Instead of a clerical knife, you can use scissors.
Work progress: surface preparation
The wall where the masonry simulation will be performed must be prepared. To do this, it is cleaned of old wallpaper and finish, primed or covered with a solution of PVA glue, which must first be combined with water in a ratio of 1 to 2. If there is a wall covered with paint, its surface is cleaned of dust and degreased.
Before you start decorating a brick wall in the interior with your own hands, you should pay attention to the existing types of bricks, of which there are quite a lot. The choice will depend on which one is right for you. With color, for example, you can experiment, but with the size of the products you need to decide immediately.
Work process
If you could not choose the appropriate brick size, then you can follow the instructions from the article. It provides for the use of a brick, which will be stacked with a spoon and have dimensions of 228 x 65 mm. Before you do the decoration of walls under a brick with your own hands, you must make bricks of the right size from thick cardboard. Sheets are cut along the intended lines with scissors. Masonry can be solid. Bricks are glued to the surface with glue for heavy wallpapers, such as vinyl. You can use PVA glue.
Finally
In order to independently create an imitation of a brick wall, there is no need to have special skills in the field of construction. You can choose the method you like the most and start finishing, having previously prepared the necessary tools and materials.