How to make a birdhouse from a five-liter plastic bottle?

From ancient times, there was a tradition at the end of winter or in the springtime to make birdhouses for birds in order to help birds settle down. Thus, it is easier for them to produce offspring and establish themselves in our area.

What birds are found in your area

Building a birdhouse is not difficult, but the fact is that it is not suitable for all birds, and taking care of only starlings is at least wrong. Therefore, pay attention to what birds live in your area, and prepare several different varieties of houses so that different birds can live in them. For example, see how to make a birdhouse out of a bottle.

Structurally, birdhouses are divided into:

• Wagtons. They are built for wagtails, since in standard houses this species is difficult to move due to the tenacity of the legs. These birds move mainly in steps, rather than flying. The dimensions of the box can be left the same, but it should be placed in a horizontal position.
• Nests. They are provided for pikas. The main difference is that it has two inputs.
• Birdhouse / Titmouse. A standard house familiar to everyone since childhood, which is suitable for all types of small birds.

You can make a house of unconventional materials. How to make a birdhouse from a 5 liter bottle, you will learn below.

Key requirements

Before proceeding with the preparation of the house, you should first consider all measures for the protection of birds. Do not even doubt that local and neighboring cats will try to climb inside and remove the chick. For this reason, you must:

1. Do not make a perch (perch) in front of the hole, because the cat will be able to catch on it with one paw, and the other calmly climb into the nest.
2. Make the visor longer so that the cat cannot reach inside from the roof.
3. If you have migratory birds nesting, with the onset of spring you need to check the birdhouse. During the winter period, other representatives of the animal world, such as bats or even squirrels, could settle in it.

In addition to safety measures, attention should be paid to the following things:

• You can not make a birdhouse made of coniferous wood. The resin that stands out from such boards will make the walls of the house sticky, which can complicate the flight of birds. This is dangerous.
• The material used to make the house must be roughened from the inside, so there is no need to plan planks. If the material is even initially, for example, chipboard, make a notch inside so that the birds could move easily, clinging to their claws.
• Inside the bird house, make it as natural as possible, do not primer and do not paint it. Decorate only the outer part of the wall, inside the birds will equip everything independently, as they need.

Dimensions and varieties of birdhouses

In order to start creating a house with your own hands, you need to choose the sizes, as well as the materials that will be used to make the birdhouse. Next, we will tell you how to build a capital building and a lightweight option - how to make a birdhouse out of a plastic bottle. Today, all structures for birds are called birdhouses, but size standards exist for different types of birds.

• Birdhouse - size 40 * 15 * 15 cm, hole 5 cm in diameter.
• The titmouse is a type of smaller birdhouse that will be an excellent refuge for small bird species: sparrows, redstart, pied flycatchers and others. Size 30 * 12 * 10, hole diameter 3.5 cm.
• The wagtail must certainly have a protrusion in front of the hole. Size - 15 * 15 * 30.
• Nests - a construction for pikas, it should be in the shape of a triangle with a through exit. Size 25 * 15, letka - 3 * 6 cm.

If you do not have information about which birds are found in your area, opt for a regular birdhouse. How to make a birdhouse from a plastic bottle, you will learn a little later. However, for small tits, a small house is more suitable, which can become a cozy nest for nesting, but starlings in it will be cramped. Perhaps this information is enough to learn how to make a birdhouse from a bottle, and begin to manufacture a birdhouse.

Large Birdhouse

An ideal material for its manufacture would be an ordinary five-liter bottle. Due to the large size of the tank, such a house will be equally good for small birds, as well as for larger birds.

1. It is necessary to make a hole (or several, depending on the type of birdhouse) of such a size that the bird fits freely there.
2. Inside you can place a little stick for the convenience of birds. This is done very simply: from two sides parallel to each other, it is necessary to make holes (with scissors or an awl) and insert a little bit into them so that the ends extend beyond the holes.

How to make a birdhouse out of a plastic bottle: choose materials

To create this option you will need:

• Drill and drill 1.4 and 1.16.
• Clean plastic bottle.
• Waterproof acrylic paints (brown, dark and light, black, beige and green).
• Brush and sponge.
• Wire.
• Old CD
• Double sided tape.

Process

1. In a container at a distance of 3 cm from the bottom, we make a round hole.
2. We drill a hole a little lower with a drill and insert a dowel into it. It will be perched for a starling.
3. We color the bottle brown (2 layers).
4. Next, take the lid and drill small holes in it - 2 pieces, thread the wire through them and twist the ends. The result should be a loop for which the house will be attached to a pillar or tree.
5. Using a stencil with beige paint, draw a window with a brush or sponge.
6. Cut the disk into pieces and color them with light brown, black and green paint.
7. Decorate the birdhouse. Glue double-sided tape to the dried pieces of the disk , and then glue them to the neck of the bottle. Thus, we get an imitation of the roof.

Birdhouse is ready!

The most democratic option

Next, you will learn how to make a birdhouse out of a bottle with your own hands, and you will understand that it is quite simple and quick. The process takes approximately one hour.

You will need:

• 5 liter plastic bottle.
• Jute or linen twine - 1 pc.
• Scissors.
• Double-sided tape.
• Glue.
• Bunches of grass.
• A piece of woolen fabric.
• Large buttons (shiny) - 2 pcs.
• Braid - 30 cm.
• Cereal cereal.
• Marker.
• Threads.
• The big needle.
• Lace.

Stages of execution

1. How to make a birdhouse from a five-liter bottle? Take a large plastic bottle with a cap and stick on the bottom of the tape strip. Glue the beginning of the twine on it and start winding the container.
2. Each next row of windings should be tightly pressed to the previous one. Fix the first and last row with glue.
3. The next step on the canvas of twine is to draw a square, apply glue along the path and cut a hole.
4. Proceed to the manufacture of the roof, for this an unnecessary woolen hat or sleeve from an old sweater is suitable. Put a woolen cloth on top of the workpiece. The edges of this canvas must be collected using a needle and thread, fastened with a cover handle.
5. Sew previously prepared tufts of grass to the wool base. When all grass is sewn, secure the top with a cord threaded through the handle of a plastic bottle.
6. Decoration of the entrance to the birdhouse. To do this, stick strips of double-sided tape on the sides of the inlet, and tape over it.
7. Fix buttons on top and bottom.
8. To attract birds inside, pour a grain mixture with minerals and vitamins. It is not recommended to pour bread crumbs, as with time they turn into gruel due to moisture, it is very harmful to birds.
9. Hang the feeder on the roof, out of the reach of cats.

Now you understand how to make a birdhouse from a 5-liter bottle without labor and special costs. Place the birdhouse should be on the east side. About once a year, some time before the arrival of birds, it must be disassembled, cleaned, changed the mat there. Then you can hang it again to meet birds.