Currently, most smartphone users have headphones. They allow you to listen to music, audio books and other files from your phone anywhere. Therefore, the question of how to fix headphones from an iPhone arises from users quite often.
Many believe that if a failure occurs, the only way out is to throw away the headset. However, this is not worth doing, since most breakdowns can be repaired at home and with their own hands.
Breakdown reasons
To figure out how to fix the wire from the headphones or another part, you should find out what could be the reasons. The method for solving the problem may depend on this. The reason for the repair can be:
- Broken plug. This situation happens when the base of the headphones was crushed by something or the wire simply frayed and the contacts lost their functions.
- Damage to the cord. Pets could cause this problem, or the headphones have been in use for a long time, and the wire just got damaged.
- Damage to the volume control. This situation is not frequent, but it also occurs among users.
There are, of course, obvious damages in which the question of whether the headphones can be repaired from an iPhone becomes negative. Such breakdowns include a wire break or complete damage to the ear.
Determination of the cause
You can use the following methods to determine in which part the problem has occurred:
- After connecting the headset to the phone, you need to move the wire in different places: at the plug, near the ears themselves, at the volume control. If the wire is damaged, then when you move it in the headphones, it will disappear, then a sound will appear or crackle can be heard.
- If the control buttons do not affect the volume, then you can gently open the mechanism and see external defects. Usually they are immediately evident.
- The problem may also be in the plug. To determine, it is enough to move the plug connected to the phone in different directions. In this situation, the sound will also change.
Now let's look at ways to fix the headphones in each situation.
Damage to the wire near the plug
The first step is to check the area near the base. In most cases, the problem is due to damage in this place. The wire is very mobile near the plug, so over time it simply wears out and ceases to transmit signals to the ears.
Before you fix the headphones from the iPhone, you need to prepare all the necessary tools and parts:
- Old headphones, or rather a working plug from them.
- Soldering iron. Without it, it will not be possible to correct the situation, since the difficulty lies precisely in the wires.
- Stationery knife.
- Insulation tape.
Now you can start the process itself:
1. First you need to remove the plug from the headphones, as it is unsuitable.
2. You must also cut off the plug from the old headset and open it. This is done with a clerical knife. It is necessary to cut the shell and remove the base. You can see several wires of different colors, which are responsible for the right earphone, left and overall communication.
3. On a piece of paper, write down the location of these wires in order to subsequently solder them correctly.
4. For another headset, you need to free some wire length from isolation with a clerical knife.
5. To fix it properly, it is best to burn the ends of the wires with fire.
6. Now you need to solder the ends to the old plug. It is necessary to follow according to the drawn diagram in order to correctly correlate the details.
7. You can check the headphones by connecting them to your smartphone and turning on the music. If all is well, then move on.
8. Next, you need to protect the place of adhesion with insulation tape.
On this operation is completed. Such a scheme is also suitable for deciding how to fix the right earphone from the iPhone and the left.
Wire defects
Very often it happens that any part of the wire breaks, and because of this, the headphones begin to work poorly. This is checked quite simply: when the music or audio file is turned on, you need to feel the wire along its entire length. If, touching a certain area, you hear that the sound begins to disappear or change, you need to mark this place in order to then act on it.
Now we’ll figure out how to fix the wire from the iPhone’s headphones:
1. The first step is to buy a new wire, which will replace the old one.
2. For older headphones, remove the cable. To do this, use a clerical knife to disassemble the ear of the headset. Inside, you can see the wires soldered to the board.
3. Remember the location of the wires and solder the new cable in the same way.
4. The plug must also be disconnected and connected to the new cable. How to do this is described above.
Problems with the volume control
If the sound in the headphones disappears due to the buttons on the headset, designed to switch the volume, then the solution is quite simple. You need to open the panel with a knife or other sharp object.
Grease the chips and contacts with graphite grease to bring them into operation. After the operation, problems with the headset should not arise.
Advice
- All Apple devices, including the headset, are tightly and efficiently glued and assembled. When disassembling the headphones, this gluing is broken, which means that you can just ruin the device. It is best to purchase special glue. You should also pay attention to the fact that all the parts are perfectly correlated, so picking them up will be problematic without damage. It is necessary to act very carefully so as not to spoil the thing.
- Do not solder the contacts too carefully. Due to prolonged heat exposure, parts can be damaged and will never work again.
- From the very beginning, it is best to test your strengths on cheap headphones that you will not mind spoiling. All the actions that will be performed on the main headset should be carried out. If everything went well, then you can already fix the headphones from an iPhone or other expensive headset.
- If there is no confidence in your abilities or there are no skills in using a soldering iron, it is best to take the headphones to the master, who will fix them qualitatively without any problems.
- After attaching a new plug, you can fix it with a part similar to the one that used to be on the base. The cap from the handle, which can be glued with glue, is perfect.
- You may be asked how to fix one earphone from an iPhone. In such a situation, you should not try to perform actions with one part. It is also necessary to replace the entire structure, since all the details are interconnected.
Conclusion
As you can see, the repair process is quite simple. You only need to have the initial skills of soldering, as well as accuracy and patience. If you try, then the question of how to fix the headphones from the iPhone will not cause any difficulties.