Faux leather products are very sensitive to various influences and are considered impractical. However, their cost is attractive, and often this factor is decisive when choosing furniture or other items. Given this, the question of how to wipe the handle from the leatherette is very interesting for modern users, since spots of this nature are most often found in everyday life.
Handles and surfaces
Currently, there is simply a huge number of different types of ballpoint pens that differ in the composition of the paste. Moreover, even one manufacturer may have products that differ in chemical characteristics from each other. The same variety is common for leatherette. Products from this material can have completely different types of surfaces, which can differ both in reaction with water and in roughness. That is why, thinking about what to wipe the handle with leatherette, it is worth considering that it is impossible to find the same solution for different products.
Chemical methods
These methods involve the use of special substances that react either with the surface itself or with the composition of the paste from the handle. With the correct selection of such a composition, it is possible to minimize the likelihood of damage to the product by friction. However, you must be very careful, because there is a risk that you can discolor the spot or change the very structure of the material.
Soap and water
This technique is quite simple and will not damage the surface. Before wiping the handle from the leatherette, you need to apply soap or detergent to the contaminated surface. Then all this is left for several minutes, after which they wash off the solution with plenty of water.
This technique is not always effective, but it is recommended that you try it first. This is due to the fact that it is considered the safest.
Nail polish remover
When thinking about how to wipe a ballpoint pen from a leatherette, it should be remembered that some products can harm the surface. Therefore, for this method it is necessary to take a liquid that does not contain acetone. It is sold in stores with household chemicals.
Apply the product with a small swab or cotton swab wound around a match. At the same time, a little friction is produced to increase the effect.
Hair fixation spray
This technique is considered one of the most effective and safe. However, it is worth remembering that before you wipe the paste from the handle from the leatherette using varnish, you need to choose it correctly. Experts recommend the simplest formulations that do not contain additional inclusions or third-party effects.
- First, varnish is applied to the surface.
- After this, wait 2-3 minutes.
- Next, apply another portion of varnish.
- After that, immediately erase the stain with a napkin.
Special stain removers
Asking the question of how to wipe the handle from the leatherette of the sofa, many people forget that there are a number of special chemistry that is created specifically for these purposes. Such a tool can be purchased in almost any hardware store, and its price is relatively low. Use such substances in accordance with the instructions for use.
Napkins for students
Recently, special napkins that are made for students can be found on sale. This is exactly what you can wipe the handle with leatherette without much difficulty. The fact is that such products are produced specifically to remove stains of this nature from clothing. Therefore, they are ideal for leatherette. Use them in accordance with the instructions.
Soda and ammonia
Quite often, when asked about how to wipe the handle from the imitation leather of a bag, people suggest using soda and ammonia. This composition has proven itself in working with clothes and copes with a variety of spots.
- First, we bred a teaspoon of soda in one glass of ammonia. In this case, the mixture should be homogeneous.
- Next, apply a small amount of liquid to a contaminated surface using a swab or cotton wool.
- You may need to rub a little to enhance the effect.
- After this, the place is washed with a small amount of water.
Vegetable oil
Quite often, you can wipe the ballpoint pen from the white leatherette with vegetable oil. This substance has proven itself when working with natural skin and there is a likelihood that it will cope on such a surface. However, it is very important to remember that some materials are not protected from the effects of fats and are destroyed by contact with them. Also, oil can cause stains, which are much harder to remove than paste or ink.
Automotive Salon Care
The automotive industry is sometimes developing much faster than the household chemicals industry. That is why, most often, high-quality stain removers from leatherette can be found in specialized stores where car enthusiasts shop. The fact is that car interiors are often sheathed with this material and special substances are created to care for it. However, it must be remembered that their cost is quite high, which means that such compositions are suitable for expensive products.
Mechanical methods
Before wiping a pen from a white leatherette using chemical agents, it is worth exploring some mechanical methods. They are sometimes quite simple, and on some surfaces their choice is considered the most optimal solution.
Melamine sponge
Considering whether it is possible to wipe a ballpoint pen from a leatherette, some users come to the conclusion that it is best to use a melamine sponge for this procedure . This material has the form of a rubber eraser, which consists of crystals that are insoluble in water. Contacting the surface, it begins to foam and absorb dirt.
For high-quality removal, you need to moisten the sponge and lightly wipe the place of contamination with it. Some users claim that traces of pasta will go away almost instantly. However, it must be remembered that melamine is dangerous to health and work should be done with gloves. Also, they should not treat surfaces that have contact with food.
After completing the work, wash the product with soap and water. Then it is dried with a hairdryer.
Abrasives or scrapers
With mechanical action on the surface, it is very easy to remove almost any contamination from it. It should be borne in mind that a small layer of the material itself is also erased, which is very harmful for thin coatings. Therefore, use a special eraser, brush or scraper only on rough surfaces or on a uniform leatherette.
Adhesives or special rubber
Some housewives recommend removing such stains using special crude rubber or adhesives. These include pencil erasers and even chewing gum. This method only works if the surface has sufficient strength and can withstand prolonged mechanical stress in the form of friction. Otherwise, the color of the coating will change, hairiness will appear or a hole will form. This technique should not be used on expensive or delicate things.
Recommendations of specialists
- Use chemicals only in a ventilated area and away from sources of fire or hot objects. Most of these compounds emit substances harmful to the human body and are flammable.
- Before you start using the selected technique, it is worth testing it on a sample. To do this, select a section of the product that will not be visible. On it and test.
- Sometimes it’s much easier to dry clean the product, where almost any stain can be removed for a small fee. Do not experiment on expensive things, since the likelihood of damage to them is very high.
- Before proceeding with the selection of the optimal product, it is worth evaluating the quality of the surface. There are many varieties of this material, which is often made on a fabric basis.
- Work with some substances should be done with gloves. The fact is that most of them destroy the skin with prolonged contact. Therefore, after processing it is recommended to thoroughly wash the place with soap and water. If they got on the skin, then it should be thoroughly washed and greased with cream.
Conclusion
Having examined various methods that show how to wipe the handle from the leatherette, we can conclude that such spots are one of the most popular, since even special tools are created to remove them. Using even the simplest technique, you need to be very careful so as not to damage the surface. Sometimes it’s worth a little wait and buying a quality solvent than after an unsuccessful attempt to acquire a new thing.