Buleryan stove is a good economical option for heating your home. It allows you to quickly heat the air and keep the room temperature at the right level. The main advantage of this device is that it has a high efficiency. Also, unlike other furnaces, this device does not burn oxygen in the surrounding space, but heats the room. Due to the not very complex design, you can make a buleryan with your own hands. This will be discussed in our article.
What is buleryan
This construction is made of durable metal, to which many tubes are connected. They help warm the room quickly enough. Cold air flows into the lower tubes, and warm air flows through the upper ones.
How to make a buleryan with your own hands
To create such a stove, you can use a water boiler or build a metal structure using a welding machine.
If, nevertheless, when constructing a buleryan with your own hands, you use a steam boiler, in it you need to cut the bottom wall for air supply. Several round holes are made on top of the boiler for the exit of already warmed air into the room. You can fix the tubes on them. This is done by welding. Then corrugated pipes are pulled over them .
Further, making the buleryan with your own hands, a pipe should be installed inside the boiler. It will provide the supply of hot air and thereby create a process of forced receipt of a cold stream for its further heating.
To remove smoke you need to build a chimney. It can be any: made of brick or from a metal pipe of small diameter. The choice in this case depends on your own preferences. In addition, an asbestos-cement pipe is sometimes used for a chimney. The smoke entering it has a low temperature, so no cracks will appear on it.
As for the safe operation of such a furnace, it will be installed correctly at a distance of at least 1.5 m from flammable surfaces and substances.
When making a buleryan with your own hands, one should not forget that it should be fixed on a support with a height of more than 20 cm. This contributes to its safety during operation and ensures a better air exchange. You can install this design on a stand made of brick and mortar, or you can use a car drive from the wheel for this.
How does a self-made Buleryan stove work?
For the operation of such a furnace using any type of solid fuel. The efficiency of this device reaches 80 percent. Buleryan, made with his own hands, has the following adjustment systems:
- power regulator on the door;
- a system for changing the oxygen supply to the chimney.
And therefore, this design can work:
- in the usual air heating mode, that is, there is a constant supply of fuel to maintain the required temperature (this process is used in simple furnaces);
- the use of a different mode of heating the room allows you to save heat at the right level for more than 12 hours (just put firewood once and the combustion process will take place gradually).
Buleryan, built with his own hands, will work properly for many years. Use it, for example, to heat a garage, cottage, private house, you can also install it in a greenhouse.
Due to its popularity, the Buleryan furnace was also produced at the production site. This indicates the importance and necessity of such an adaptation.