How to remove stone in the toilet: tips

In order to constantly reign comfort and coziness in your apartment, it is necessary to regularly maintain cleanliness in it. This applies not only to living rooms. Any home plumbing, and especially the toilet, needs quality care. Over time, specific plaque and stone-like formations appear on its walls, which are not so easy to remove. It affects not only aesthetics, but also contributes to the spread of unpleasant odors, and also creates ideal conditions for the propagation of pathogenic microflora. That is why many people are wondering about how to remove a stone in the toilet with their own hands. This can be done not only using purchased household chemicals, but also using folk methods. Let's look at the most effective ones.

general information

There are many ways to remove stones in the toilet. However, before we talk about them, let's first look at the causes of plaque formation. The main one is untimely flushing of urine. This problem is well known to families with small children. If you do not take any measures, then gradually the coating will become more and more and begin to harden, as a result of which it will be very difficult to get rid of it.

Another common reason is the untimely or improper cleaning of plumbing. Some people treat the toilet with boiling water, because of which microscopic cracks form on the surface, which cannot be removed from the stone. And the last key factor is too high water hardness. Fortunately, all these problems are easily solved. Next, we will consider in detail how to remove stones in the toilet and what to do so that they do not appear on the plumbing.

General tips and tricks

Regardless of which method you use to deal with plaque, you must adhere to certain rules so that everything is done well. Here are the main ones:

1. When working with household chemicals, use rubber gloves. If aggressive substances get on the skin, they can cause severe irritation. Also, some products have a pungent odor, so it is better to wear a protective mask.
2. Before starting cleaning, completely drain the water from the tank.
3. After applying the cleaning composition, do not immediately wash it off. Leave the plumbing for 2 hours, so that the product penetrates as deep as possible into the plaque structure.
4. Liquid chemistry must be applied at least twice.

If you follow these recommendations, you can get rid of plaque with a regular brush. However, if it is outdated, then the expected result may not be achieved. How to remove limestone in the toilet in this case? You can learn more about this later. This article will describe the most common methods.

Household chemicals

Let's dwell on this aspect in more detail. Many people wonder how to remove a stone in the toilet with their own hands. The easiest and fastest way to do this is with the help of special chemicals. They are sold in convenient bubbles that allow you to surface even in hard to reach places. Among the most popular, the following can be distinguished:

• "Sanox ultra" is a gel containing oxalic and aminosulfonic acid. It is odorless, penetrates deeply into plaque and does not spoil plumbing.
• Domestos is a highly concentrated gel based on hydrochloric acid. When interacting with water, the color of the substance changes. If you apply it on a contaminated surface and leave it for a while, then the plaque can be eliminated with a regular brush.
• Comet 7 is one of the most powerful chemicals that can effectively cope with even the most complex contaminants. The main component is sulfuric acid, which prevents the formation of new stones over a long period of time.
• "Dressing duckling" is a good alternative to Comet, which has a similar composition, but having a lower cost. It has a pleasant odor that does not irritate the nasal mucosa.
• Cillit is another modern tool with which you can quickly remove urinary stone in the toilet at home. The active substance is hydrochloric acid, contained in a safe consistency for humans.

It is worth noting that before you start using any household chemicals, you need to carefully study the instructions, paying special attention to safety rules.

Folk methods

What are they and what is their feature? Industrial chemicals for plumbing care are quite expensive. Therefore, each person is interested in how to remove stone in the toilet with folk remedies. There are quite a few good ways based on using the following tools at hand:

• vinegar;
• lemon acid;
• carbonated drinks;
• baking soda;
• phosphoric acid.

Each of the methods has certain features that should be considered when cleaning plumbing. So that you can do everything right, let's take a closer look at how to remove stone in the toilet using alternative methods using improvised means.

Vinegar use

So what do you need to know about this? This product is widely used in canning and cooking, so it is in every home. To combat plaque, 9 percent vinegar is required. The instructions for use are as follows:

1. Preheat the vinegar and add some table salt to it.
2. Pour into the toilet and leave for several hours, and best of all until the morning.
3. Use a brush to scrub the coating until the walls of the drain hole are perfectly clean.

It is worth noting that this method may be ineffective in the case of obsolete plaque. In case of severe contamination, the procedure will have to be repeated several times. If the desired result is not achieved, then try using one of the methods discussed below.

The use of citric acid

Not sure how to remove stone from the toilet? A strong effect can be obtained with ordinary lemon. What is its feature? It contributes to the splitting of limescale and provides for its easy removal from the surface of plumbing. However, to achieve maximum results, the procedure will have to be done at least 3-4 times. The bottom line is this:

• Pour 2 bags of citric acid into the drain hole.
• Wait 2 hours.
• Clean the plaque with a brush.

This method is simpler than using vinegar, but no less effective.

Using baking soda

Sodium bicarbonate has long been known for its whitening properties, but is it possible to somehow remove stones in the toilet at home? Yes, there is one way that will allow the plumbing equipment to return a snow-white shine. Follow these instructions:

1. Sprinkle a thick layer of contaminated surface areas.
2. Leave the toilet until morning.
3. Remove the baking soda with the brush.

This method perfectly copes even with old dirt that has petrified. The main thing is to give the soda as much as possible to stay on the pollution so that it softens it well.

The use of carbonated drinks

No matter how strange it may sound, you can clean the plumbing with the help of sweet water, which we often buy in stores. But there is one important nuance: any will not do. Best to use the well-known Coca Cola or Sprite. The procedure is as follows:

1. Pour soda overnight into the drain hole.
2. In the morning, use a brush to remove plaque.

Not sure how to remove stone from the toilet? A strong method has been described above. You will be surprised how easily in the morning the dirt will lag behind the walls of your plumbing. According to experts, Coca Cola eats away not only plaque, but also many other items. If you put in it a piece of meat or even a tooth, then after some time they will completely dissolve. Therefore, you need to seriously think about whether to use it.

Long-term Pollution Control Methods

How to remove stones in the toilet, if they are petrified and not displayed in any of the above ways? In this case, phosphoric acid or electrolyte can help to cope with the problem. When using the first, the procedure will be as follows:

1. Pour 150 milliliters of substance into the tank and drain hole for 10-15 minutes.
2. Drain and carefully scrub the surface with a brush or rag.

It also effectively removes mineral deposits from plumbing equipment electrolyte. However, this substance is very dangerous for human health, so you must work with it with rubber gloves. But if you have installed plastic pipes, then you can’t use it, because it will damage the communications.

How to care for plumbing

Let's dwell on this in more detail. Above, we examined in detail how to remove stone in the toilet. But it’s much easier to prevent a problem than to solve it later. If you properly care for plumbing, then it will always remain clean. The following tips and tricks will help you with this:

1. If you have a porcelain toilet, then you need to clean it exclusively with gels or liquid products. Abrasive substances can damage the surface, as a result of which it will become much more dirty.
2. Porcelain plumbing is forbidden to pour boiling water and rub with hard brushes. This can lead to the formation of microcracks, which will complicate care. To get rid of the stone, it is better to use household chemicals made on the basis of hydrochloric acid.
3. In the case of polymer toilets, the best option is gels and liquid formulations.
4. For devices made of stainless steel, any means and methods discussed in this article are suitable.

By adhering to these simple rules, you can extend the life of your toilet and it will remain as good as new for a long period of time.

Preventive actions

This aspect should be given special attention. There are several simple actions that will prevent the formation of limescale on plumbing. Here is some of them:

1. Check the condition of the drain tank. If it lets water through, it can cause stones to form. If necessary, replace worn out or defective elements, and also adjust the pressure.
2. Use hinged toilet cleaners. Each time the water is washed off, they will clean the surface of the drain hole, which will prevent plaque settling.
3. After visiting the toilet it will be useful to walk after yourself with a brush. So you can eliminate small pollution without the use of purchased funds.
4. Do not throw leftover food, waste oil, or fat into the toilet. As practice shows, this is precisely the most common cause of plaque formation on the walls of plumbing.
5. For prevention, you can use special pills for the tank. They not only prevent the formation of stone, but also disinfect and disinfect the surface, preventing the reproduction of pathogenic microflora.

In addition, once a week you need to carry out scheduled cleaning in the toilet using chemicals intended for the care of plumbing.

Conclusion

So now you know how to remove stones in the toilet. All the methods considered are highly effective and will give the plumbing a proper appearance. However, if the alkaline coating has managed to petrify, then dealing with it may not be so simple. Therefore, it is better not to bring this up, but to clean the equipment in a timely manner. This is also important because pollution not only affects aesthetics, but also creates favorable conditions for the propagation of harmful microorganisms.