The wooden key keeper: manufacturing methods

Keys are in the habit of getting lost. This small item performs a great function - it closes and opens our house. Therefore, it is better not to lose them, since thieves can take advantage of them. It will be convenient if the keys in the house or apartment will have their place. Such an interior item as a wooden key holder will provide a place where they can always be found without difficulty. Also, this piece of furniture is a great option for a gift . Moreover, you can do it yourself . For this, special skills are not needed. There are many options for making such an interior item, like a wooden key holder, with your own hands. All of them have a simple technique.

Wooden key keeper using a board

1. In order to make it easier to work, it is necessary to draw a drawing of the future housekeeper. To do this, you first need to decide what size it will have. A drawing of a wooden housekeeper will be a kind of design project, according to which the work on its production will take place. Here you can also indicate what decorative elements the future key holder made of wood will have .
2. Next, prepare the tools and materials that will be used in the work. For this project, you will need a wooden board, 6-8 keys, screws, a drill and wire cutters.
3. Unnecessary keys will serve as hooks. Therefore, using nippers, it is necessary to bend their lower part so that a hook is obtained. This procedure needs to be done with all the elements of future hooks.
4. Then you need to take a wooden board and mark the cut lines on it in accordance with the dimensions that were indicated earlier in the drawing. Using a saw, make a board for a key holder of the right size.
5. Further, depending on the idea, you should decorate the board. I must say that there are a lot of design ideas. Alternatively, you can leave it as it is. The tree itself is very warm and cozy material, so without any finish it looks good at home.
6. After the board is ready, we fasten the curved keys to it using self-tapping screws. They will be hooks later on. The distance at which these elements are mounted should be selected based on your preferences. You can attach keys at the same distance from each other , or you can group them.
7. Next, on the back of the board we make a hole with a drill, which will be needed in order to fix the key holder to the wall. The holes should be non-through, their number depends on the length of the board, usually two or three holes are enough.

When the housekeeper, made of wood made with his own hands, is ready, you can use it for its intended purpose. Above was described one of the easiest ways to make a key holder from wood. But he is not the only one.

The key keeper using decoupage technique

There is another simple way how to make such an interior item as a housekeeper with your own hands from wood using decoupage technique. For this option, you need the following materials.

1. Wooden frame. The size of the frame depends on what size the key holder needs. It is better to buy a frame that has special rings on the back wall for attaching to the wall.
2. For decoupage you will need a napkin with a pattern or a picture or a special decoupage card.
3. Special decoupage set, which includes glue, brush, primer, varnish.
4. Hooks They can be made from anything. For example, from buttons, knobs, rings, and more.
5. You will also need a knife, pencil, ruler, drill and screws.

The work on the manufacture of this interior item can be divided into two stages . First you need to make a decoupage, and then collect the key keeper.

How to make decoupage

In fact, decoupage is not difficult to do. To do this, it is necessary to disassemble the frame, take its base and primer, leave for some time for drying. You can use a hair dryer to speed up the drying process. Then a decoupage pattern is glued and left for a certain time to dry. Then the drawing must be varnished and also allow time to dry.

Assembly of the key keeper

The next step in the manufacture of the key keeper is its assembly. To do this, first gather all the details of the photo frame. Then you need to outline the places on the wooden frame where the hooks will be attached. They are attached using self-tapping screws.

It should be said that wooden wall key holders have many manufacturing options. For example, embroidery can be used instead of decoupage. And instead of the frame, take the opening box. You can also approach the process of making a housekeeper with humor and focus on the hobbies or hobbies of the landlord.