How to make a hole on the belt yourself? Inaccurate work in this case can completely spoil the appearance of the product. Therefore, before proceeding with the implementation of the task, it is necessary to figure out how to properly punch a hole, what tools will be required for this. Next, we consider a few recommendations that will help you figure out how to make a hole in the belt.
The use of a special punch
How to make a hole as accurate as possible in a belt? This will help the
punch for the skin. Such a device can be purchased relatively inexpensively at any point selling
needlework tools. In order not to make a mistake with the diameter of the punch, going to buy it, you need to take the belt with you. If you need to make holes in several belts, you should buy a tool with removable tips of various sizes.
In preparation for work, it is necessary to mark the plane of the belt, measuring the distance between the factory holes with a ruler. Then you should postpone the same segment on the plane and mark the place of the future hole.
Before applying a hole punch to the skin, it is necessary to fix the belt so that its plane is in a taut state. Further, it is enough to attach the tip of the punch to the intended area and squeeze its handles strongly. It is necessary to relax the hole punch for the skin as soon as its elements completely flush the material.
Nails and hammer
How to make a hole in a leather belt? The simplest solution here is breaking a hole with a nail. The main thing is to initially determine the location of the future hole by performing appropriate measurements. To make notes in the right places, just use a ballpoint pen or marker.
The work is performed in the following sequence:
- a suitable nail is selected, the diameter of which should approximately correspond to the size of the factory holes on the product;
- the belt is located on a flat board surface;
- the tip of the nail is set at a previously designated point;
- several punctuated blows are carried out on the nail head until its shaft completely sews the belt;
- the nail is rotated several times in the thickness of the leather product, after which it is carefully removed with the help of pliers.
Upon completion of the work, it is advisable to treat the edges of the resulting hole with shoe polish of a neutral shade. In this way, the uneven edges of the material at the breakdown point can be smoothed out.
Electric drill
Thinking about how to make a hole in the belt, it is worth considering the option of using an electric drill. Being careful, with its help it is possible to make rather equal, accurate openings.
To begin with, it is recommended to fix the belt by pressing its ends with a heavy load. In this case, the area to be processed must be located on a flat, solid surface, for example, a wooden block.
To determine the optimal drill size, it is enough to manually insert several rods of individual diameters into the already existing holes on the belt. It is recommended to stop at the drill, which will be tight enough to enter the hole.
How to make a neat hole in the belt using a drill? To do this, you must first make a slight depression in the intended point, using the tip of a sharp knife. As a result, the drill will not slip to the sides during the execution of the work.
Starting to make a hole, it is necessary to make short-term starts of the drill mechanism. In this way, the risk of making a sloppy hole can be minimized.
Shoe awl
To cope with the task with a boot awl, you first need to mark the plane of the belt. Then you should place the product on a fairly solid plane, which at the same time can pierce the tip of the tool. You can lay the belt on compacted soil or a piece of foam.
Next, you should make a hole in the belt with the point of an awl. If necessary, expand the hole diameter with any suitable metal rod. Pieces of material that formed on the wrong side of the product after breaking through can be carefully trimmed with manicure scissors.
Useful Tips and Warnings
There are several recommendations, following which will facilitate the task and avoid injuries:
- Trying to find a solution on how to make a hole in the belt, do not resort to using a conventional kitchen knife or scissors. The use of such blades will not allow you to create neat holes.
- Piercing thick skin can be quite a challenge. Therefore, when using a hole punch, you may have to use the help of a partner.
- The use of improvised tools, such as a hammer and nails, an awl or a drill, will not require additional costs. However, the operation of a special tool designed for such work will save not only time, but also reduce the risk of accidental injuries.
- Before proceeding to break through a hole in a leather product in one way or another, it may be worthwhile to pre-train using a piece of old unnecessary material.
To summarize
So we found out how to make a hole in the belt. The solutions indicated in the material presented will not make you turn to the workshop for help. The main thing is to carry out the work slowly and as carefully as possible so as not to spoil the product.