Having visited the store of modern furniture, you will see interior items in a large assortment. Among other market offers there are solutions for hallways.
These are tables, glass cabinets and curbstones with bent legs. But the area of this room is usually very scarce. As a rule, you can’t put a sofa here. Moreover, you have to rack your brains to hang at least a hanger. You can buy it in the store, but it will be much cheaper to do it yourself.
This approach will not only save the budget, but also open up a lot of opportunities for you. So, you can embody your designer's ideas. Some, having discovered the talent in themselves, begin to make pieces of furniture for relatives and friends. And with a better scenario, you can even open your own business. This may turn out to be beneficial, because modern materials for the manufacture of furniture are not so expensive, and if you are a master yourself, you can also save on labor.
Training
A fairly simple task will be to trim the board by nailing hooks and brackets to it. This design miracle can be hung on 2 dowels. However, in a small hallway, the hanger should fulfill not only a functional role, but also be beautiful. The role of the rod can be a wooden dowel, which is inserted inside the logs during the construction of the house. In place, you can calculate the size of the hanger, given that to the depth should be added the width of the shoulders, located perpendicular to the wall. Next, prepare a drawing indicating all the parameters.
Preparation of tools and materials
Before you make a hanger in the hall with your own hands, you must take care of the availability of materials and tools. The load on the product will be quite large. Clothes will hang on hooks and a bar, and scarves and hats can be placed on top. Therefore, you should pick up a bar of impressive thickness. Among the set of materials it is necessary to highlight:
- beam for the bearing part and cross-members;
- confirmations;
- wooden dowel;
- brackets;
- screws;
- hooks;
- screw;
- paint.
The bars for the supporting part must have the following dimensions: 20 x 30 x 3000 mm. For the cross members, two 20 x 20 x 2000 mm beams will be needed. Confirmations are needed in the amount of 18 pieces, they are also called Euro-screws. Screws must have different lengths, their number is limited to 10 pieces.
To mount the structure to the wall, you need 2 brackets. As a material for the improvement of the hanger should be allocated stain and varnish. If you are faced with the question of how to make a hanger in the hall with your own hands, you should also take care of the availability of tools, namely:
- drills;
- screwdrivers;
- hacksaws;
- bar with sandpaper;
- screwdriver;
- brushes for painting.
Cutting blanks and assembling hanger
You should not buy a bar with knots. Under load, the knots will fall out of the nests, and the structure will collapse at the most inopportune moment. You should buy a homogeneous beam, dissolving it on the blanks for bearing triangles. The hypotenuse of the triangle inside is 397 mm. The leg, which will be parallel to the wall, should be 339 mm. That leg, which will be parallel to the floor, should be 372 mm.
Using a protractor, you should outline oblique cuts. As an alternative solution, attach the hypotenuse on the legs to mark with a pencil. On the received line you will carry out a cut. Before you make a hanger in the hallway with your own hands, you must check the blanks for triangles. They are compared in pairs. They must match as closely as possible, this will make it easier to work. After cutting the blanks, they are treated with sandpaper until smooth.
Work on triangles
Having departed from the ends of the short sides of the triangle, the distance should be marked blanks. The mark is placed in those places where the tightening screws will pass. Holes are drilled under them. Then you can drill the inclined nests by placing them in the lower part of the triangle. Then you need to tilt the tool and drill the workpiece to the end. Do not press the drill during operation so as not to split the material.
To deepen the screw head, the hole must be cut with a drill of a larger diameter. The lower corners of the triangle are pulled together by screws. The upper back of the workpiece must be strengthened with a bracket. The same should be repeated on the other hand.
Installation of rails
If you are faced with the question of how to make a hanger in the hallway with your own hands, then at the next stage you should start installing cross rails. The length of the hanger will be 735 mm. 60 mm should be subtracted from this value, which is the thickness of the beam of triangles. This will get 675 mm. This value is the length of the rod and cross members. The most powerful rail should be cut out from a 30-mm beam. Each cross-member and the rod should be clamped with a clamp to the table, and then drilled in the ends of the holes for confirmations. You should not be afraid that the drill will go deeper than the length of the Euroscrew. This will only protect the beam from splitting.
After that, you can make reciprocal holes. The upper transverse rails will be located at different heights. For example, the one located above the bar should be slightly higher so that it is easier to remove and hang the shoulders. Between the sides of the triangle you need to fix 2 struts on the confirm. Hooks are screwed onto one of them.
Final stage
Making a hanger with your own hands, you will need to assemble it together by connecting parts with Euroscrews. Products are coated with a coloring agent in 2 times and dried. Hooks can be turned over. In order for the distance between them to be the same, the length of the beam should be divided by the number of hooks plus one. The found number is measured starting from the edge of the bar. Turning the hooks over, you will need to hang the hanger on the wall. The punch is used in the process.
Using boards
Using the scheme, you can make a hanger in the hall with your own hands. However, the drawing can be done independently. If you don’t want to buy the usual bar with hooks, you can diversify the interior with a hanger in the form of a tree.
Wood can be treated with water-based varnish or stain. It is better to choose a color close to the shade of the front door. At the sawmill, you can purchase unedged boards 25 mm thick. Markings are applied on them, on the one hand there will be a trunk, on the other - branches.
Using a jigsaw should cut the workpiece. Next comes the turn of dusty work. It is necessary to polish the wood, adjusting the thickness of the junction with the branches. A drill with a rubber nozzle and an emery cloth is perfect for this purpose.
First, the material is processed with paper with coarse grain, then you can move on to medium and fine. Then a mahogany stain is applied. It can be applied in several layers. After drying, everything is varnished with water-based. It can be applied in 3 layers, between each of them a break of 3 hours is maintained.
If you are thinking about how to make a hanger for the hall with your own hands, you might think what to use as hooks. For this purpose, 200 mm nails are perfect. They are cut to the desired length. Hats and shank can be sanded for smoothness. Threads are cut into the bottom of the board in the thickness of the board.
In the branches, holes should first be made where the hooks are screwed. All parts are mounted on the wall. If it is concrete, it is better to use dowels. First, a trunk is substituted through which holes are drilled. Plastic plugs for dowels are inserted there. As soon as you put the barrel, you can screw it. Using the same technology, reinforce the branches. Now you know how to make a phased wall hanger with your own hands. Complement this design with a shelf under the shoes. The cost of making a hanger will vary from $ 6.
Chipboard hanger
In the building materials store you can purchase two boards from laminated particleboard. This material is also called furniture board. The price for it will be low. In the hardware department you can buy brackets. They can be used for the second board, which will be used to make shelves for small things.
If you are interested in how to make a clothes hanger with your own hands, you need to consider or prepare drawings for a start. You can find them in the article. You will also need tools, namely:
- drill;
- screwdriver;
- set of drills;
- pencil;
- roulette.
Remove stains and traces of glue with chipboard with a solvent. For this, a white rag is used. The hooks are laid out in a checkerboard pattern, here you will need a pencil and a tape measure, with which you can measure the same distance. Next, it should be noted places for screws. The hooks are removed and holes are drilled in their place. You need to use a 2 mm drill.
Methodology
Now you can do the shelf. On one side and the other, you should set aside equal distances by attaching brackets and measuring the holes for the fasteners. Now you can drill holes by installing brackets.
When making a wall hanger for clothes in the hallway with your own hands, you will have to fix it on the wall. The technique remains the same, but you will use dowels in this case. The drill is selected by the size of the dowel. A plug is inserted into the hole, then you can attach the hanger to the wall and fix it.
Finally
You can independently implement one of the ideas proposed above. You can make a wall hanger in the hall with your own hands , thereby saving useful space in a small room. This design does not take up much space. And if desired, the hanger can even be hung on the door. If desired, such a piece of furniture can be supplemented with additional functional elements. It can be shelves, cabinets and cabinets. Everything will depend on how much usable space is in your hallway.