Soldering iron stand is an indispensable attribute of a soldering installation. It can be purchased at any hardware store or market. However, its cost is quite high. To save your own money, a stand for a soldering iron is made with your own hands. In addition to the financial issue, its functionality is considered. That is, it can be used for various needs in the household or in a production workshop. There are a lot of manufacturing options. All of them are distinguished by the complexity of the design and the amount of time spent.
General information
As mentioned earlier, a do-it-yourself soldering iron stand is a convenient fixture that performs many functions. First of all, it is a protective surface, which prevents damage to property.
Before working with a soldering installation, it must be warmed up. In this case, the metal case is heated to high temperatures.
Soldering iron stand - what is it for?
A high-quality detail is necessary for those people who perform many tasks with soldering. For the manufacture of such a device as a stand for a soldering iron, no special skills are required. The process uses simple and affordable materials and tools. The finished device is easy to handle. A homemade soldering iron stand should consist of individual elements. First of all, special containers for rosin, flux and a department for mixing them are provided. Some models are equipped with a box where small parts are stored. Soldering iron stand is suitable for any device, regardless of its power and degree of heating. In the manufacture of the design should take into account the location of these containers. Everything should be located so that the master was comfortable soldering.
How to make a stand for a soldering iron?
Buying ready-made stands is not profitable, since they have a high cost and small overall dimensions, which are not suitable for all types of devices. Therefore, many users ask themselves this question: "How to make a stand for a soldering iron with your own hands?".
Before starting production, it is necessary to prepare materials. To do this, purchase the following components:
- duralumin sheets, the thickness of which is 1.5-2 mm;
- a small wooden block (various types of wood can be used);
- containers from under a varnish;
- two metal boxes.
When all these parts are purchased, you can begin to manufacture the stand.
So, in the plate you need to make several holes. Tanks for rosin and alcohol will be fixed on them. Mounting cans is easy. Tanks should be easily inserted into the structure, and also fit snugly against each other. After these procedures, support must be made. It is made by bending the base.
If necessary, each person can make special racks that raise the structure to a certain distance. This is done for convenience in the process. Preparatory work ends on the processing of duralumin sheet with a file or sandpaper. Corners should not have sharp ends.
Assembly assembly
So, we begin assembly of a support for a soldering iron. The prepared support must be secured to a wooden beam.
This can be done with screws. Next, joining the prepared small containers. They are attached to the base using special glue or epoxy. Many craftsmen also install a small capacity between the racks. In it, you can store small parts that will be needed in the process.
From wire
A wire soldering iron stand has gained great popularity among many craftsmen and amateurs. It can be made from a regular tin can. The assembly process uses simple details:
- tin;
- large diameter pencil;
- washers and bolts;
- wire.
First you need to make a spring. The first thing to do is purchase wire in the store. Some people remove it from other indoor appliances. It should be thick enough so that a soldering iron preheated to high temperatures does not destroy it. In addition, only high-strength material will go into operation. The finished product must spring.
Cut the required length of the wire and carefully align. To create a spring, a large diameter pencil is used. Holding the wire, gently wrap it on a pencil. The result should be a dense spiral. At its end, a special mount is made in the form of an eyelet. For these purposes, use pliers.
The next step is to prepare a can. A small hole is drilled in its bottom.
This can be done with a nail or drill. Next is going to stand for a soldering iron. The prepared spring is inserted into the jar and the structure is fastened with a bolt and nut. Washers are used to provide a stronger hold. This method is quite simple. Everyone can make a soldering iron stand. For its manufacture does not require much time, as well as special tools.
Soldering iron stand with power control
More and more people prefer to use this particular type of stand. Its essence lies in the fact that it is equipped with a special device that independently adjusts the degree of heating of the soldering iron. Therefore, the device does not overheat and does not fail. The stand differs from other types in that it requires a connection to the mains for its functioning. To make an option with a power regulator, you need to take the following elements:
- copper wire;
- a small piece of plywood;
- transformer;
- LEDs
- mounting parts;
- resistor;
- wires
- outlet for connecting to the network.
After all the necessary parts have been purchased, proceed directly to the assembly of the stand.
First, select the installation size. Based on this information, a base is cut from a plywood sheet. Next, a transformer and other parts will be mounted on it.
Fuse holder
The production of this option does not take much time, effort, and also does not require large financial investments. The base is a wooden beam on which the fuse jaws are attached. They can be of various sizes. It all depends on the personal preferences of the masters.
Stand Benefits
First of all, the main advantage is mobility. Homemade coasters are used by people who often solder, working within several workshops. Not always at hand is such a design. However, it is easy to manufacture. In addition, you do not need to carry rosin and tin separately in different containers, as they are now stored in special jars on a stand. Therefore, home-made installations are successful not only among amateurs, but also among professionals.
How to make a simple model?
It so happens that it is urgent to use a soldering iron, but there is no stand for it.
In this case, there is no time to look for the necessary parts, and run around the shops. Therefore, it is better to make a simple, but also reliable design. There are many options, but there is the fastest. The stand can be made in a few minutes. An ordinary wooden block will serve as a base, and coasters - screws or nails. They drive into the beam crosswise. This forms a stand on which the soldering iron fits well and holds tightly.
Conclusion
When soldering elements, a stand for the device must be present. This auxiliary equipment is expensive, so it is better to make it yourself. Such a process will not take much time, effort, and also save money.