Installing a toilet and connecting a tank is a simple process, and everyone can cope with it without the help of a professional. It is worthwhile to understand how cold water is introduced and where is the outlet to the sewer system. The easiest option is when the tank is located on the toilet itself.
When the element is located on top, then at the first stage it is firmly fixed. This is an additional procedure and a waste of time. The whole process requires attention from a person. You must follow the sequence of each step. Do not forget anything, otherwise the operation of the device will simply be disrupted.
Nuances
If the bathroom is undergoing repair work and the floor height has changed, you will have to return it to its original form. This is necessary when using corrugations for sewage. But the water supply is carried out using a flexible hose of a small section. So changing its length is not difficult. Great difficulty in this should not arise.
If the floors in the toilet are not even, then sealant is used to create high-quality conditions. This is how load distribution will occur evenly. The outlet of the sewer pipe is of great importance. If it goes straight to the floor, then without corrugation and the creation of a knee, nothing will come of it. This is not the only method, but the most optimal.
How to assemble a toilet bowl?
The procedure itself takes place in several main stages:
- The first is the assembly of the tank. Having disassembled the purchased unit, you need to make sure that all the parts are included.
- Before you assemble the toilet bowl with a button, you need to carefully study the instructions from the manufacturer. Not all of them are going the same way. Everything will depend on which drain system is selected, since it is more difficult to assemble a toilet flush tank with a button than any other.
- Further it is necessary to carefully and carefully fix each detail, but not too much so that the thread remains in place.
- Most often, all fasteners are included. Do not forget about bolts, gaskets, etc.
Tools and materials
In addition, it is worth immediately preparing materials and tools for work, which are also relevant in the installation of the toilet itself:
- Drill.
- Hammer.
- Chisel.
- Screwdrivers.
- Set of wrenches.
- Adjustable wrench.
- Putty knife.
- Roulette.
- Sharp knife.
- Building level.
- Scotch.
- Sealant.
- Corrugation.
- Flexible hose for water supply.
- Bucket and rag.
- Construction adhesive tape.
- Solution.
- Dowels.
Before you start work, you should purchase a high-quality toilet bowl and cistern. The element can be together with the toilet or fixed separately. The main one is the type of discharge drain. If there is no desire to change the supply, then you should buy the same as it is. Already at the planning level it is worthwhile to understand what kind of tank will be in the toilet to do eyeliner and other work.
If there is an old design, then it must be removed. This procedure is not easy and takes place in several stages. Everything needs to be done carefully. Only then will it be possible to install a new design. If there are cast-iron pipes, they are replaced with modern plastic ones. They are more durable and reliable. At the stage of transportation to the place, you must follow the rules, otherwise you can cause damage.
Recommendations
Of course, each design has its own mounting method. Masters highlight general recommendations:
- A drain system is mounted in the tank. Usually all this is included in the kit, so you just need to install it.
- A washer with a seal is fixed on the device and twists. You do not need to use tools for this. In order not to break the thread, you must do this manually.
- A tank with an installed drain mechanism is fixed on the toilet. There are all the components for this, so nothing else will be needed. When the bolts are in place, do not forget about the seals.
- How to tighten the nuts? It is important to do everything sequentially so that the load occurs evenly.
Sewer connection
How to assemble a toilet bowl? It must be fixed to the sewer, neatly and accurately. To do this, you will need:
- Eccentric or corrugated cuffs.
- Bends.
- Background pipes.
Be sure to use sealant in the process. The use of a cuff is an affordable price and an easy-to-do job. This method is suitable when the toilet is fixed in a hard-to-reach place or it is not clear what distance is laid. When the fastening is completed, you need to check for leaks - just pour a bucket of water.
If there are no problems, then the rest of the process has come. Before you assemble the toilet bowl, you will have to understand the process of connecting to water. The system implies entry from the bottom or top. For this, a previously prepared flexible hose is used and the entrance to the tank is introduced. You can’t do without a crane, because if there is a breakdown, it should be possible to block the installation.
Installation of the compact system
How to assemble a toilet bowl? To do this, several basic steps are performed:
- The toilet is fixed with a sewer.
- After which the structure itself approaches the wall, but in such a way that creases do not appear on the corrugation.
- When it is clear where the toilet seat is, marks are made under the dowels.
- Only then are holes made.
- After installation is done on a permanent place and fasteners.
As soon as the toilet is connected to the sewer, you need to tackle the drain tank. Using the coupling, the drain and inlet pipes are fixed. Then, given the height, you need to make marks on the wall. In these places there will be fasteners. The tank is disconnected, and only after that it needs to be fixed in a constant place with the help of fasteners. When this is done, the pipe is put back in place.
Conclusion
So, we figured out how to assemble a toilet bowl yourself in a house or apartment. The process itself will not be difficult if the preparatory work is done in full. According to the masters, all procedures are approximately the same - it all depends on the drainage system. If it is a button, then it is not so easy to fix it. But in any case, you need two pipes (drain and inlet), so that the fluid flow occurs in full. It is imperative that all attachment points be filled with sealant to completely prevent leakage during operation.