Plastic windows in private homes and apartments are by no means uncommon. These designs are relevant for several reasons. Firstly, they are energy-intensive and do not let heat through them. Secondly, these windows are distinguished by good sound insulation, which is especially important in large cities. A huge assortment allows you to choose products that fit perfectly even in the most custom design. But so that these structures do not lose their appearance, they must be properly looked after. Therefore, in today's article we will consider how and how to wash plastic windows at home, as well as window sills.
New windows owners
For those who have installed such designs recently, you need to know a few important rules. Do not clean until foam has frozen on the windows. Usually it takes on a solid appearance two days after application. Also note that new windows and window sills are always covered with a protective film. It can be transparent or with inscriptions - it does not matter.
Some owners do not remove this film for a long time. But in vain. After all, glue changes its structure over time and can simply fit into the cavity of a window sill or frame. And then it will be very difficult to wipe off traces of the film. It can be left only if the room is still undergoing any repairs. In other situations, you need to get rid of it as soon as possible.
Instruments
How to wash plastic windows? If we talk about tools, these should only be:
- Clean rag.
- Soft sponge.
- Bast.
Do not use tools with an abrasive coating, even if the goal is to remove the old stain or traces of glue. So you can easily damage the plastic, and leave scratches on the glass. In extreme cases, use a sponge with a hard pile.
Suitable remedies
What is better to wash plastic windows? Today, stores offer a lot of cleaning products. Among them it is worth noting:
- Gel "Domestos". It perfectly corrodes dust and removes stubborn dirt. Also, this gel has the effect of restoring whiteness, so it is perfect for yellowed window sills.
- Liquid "Mr. Proper." Perhaps everyone has heard of her. And if the first remedy can be attributed to the category of "heavy artillery", then this liquid is more suitable for everyday care. It perfectly removes dust and greasy fingerprints. But with traces of soot and vegetable fat is struggling with difficulty.
- Cream "Pemolux". The composition of this tool includes soda. Thanks to this, the product perfectly fights against stubborn dirt. The cream also removes traces of flower pots.
- Gel "Comet". Eliminates serious dirt and stains. But in its pure form, it should not be used. The gel is diluted in a ratio of 60 milliliters per five liters of water.
- Cream "Mr. Muscle." Suitable for cleaning stains from dried water. It is sold in the form of a spray and is easy to apply to the surface. Partially gives whiteness to plastic.
Folk remedies
There are folk methods that allow you to clean the surface efficiently. How to wash plastic windows? Among the effective methods it is worth noting:
- Chalk and toothpaste. These components are diluted in water to a state of liquid slurry and applied to a dirty surface. You need to wait 20-30 minutes until the product dries and then it can be wiped dry with a rag.
- Washing powder. It is also used with water and excellently removes impurities.
- Laundry soap. However, it can only be used to remove fresh stains.
- Vinegar with baking soda. The latter must be sprinkled on a stain and rubbed with a damp sponge or a piece of wet rag.
- Ammonia. Dilute in the following proportion: two tablespoons of ammonia per one liter of water.
- Starch. One and a half tablespoons of the remedy is enough per liter of cool water. The solution cleans stains and greasy marks well.
How to wash plastic windows, everyone decides for himself. However, if the pollution is not significant and in most windows there is only dust, it is enough to use “Mr. Muscle” or “Mr. Proper”. But serious spots are removed by “Comet” or “Domestos”. How to wash plastic windows from folk remedies? Ideal for this is a soda with vinegar.
Well, in the absence of these components, you can use the usual washing powder. A detergent for plastic windows (for example, Fairy) is also suitable.
Work stages
For the cleaning procedure to be successful, you need to know the order of the work. The operation is performed in the following sequence:
- First, the surface of the frame is washed from dirt.
- Next, double-glazed windows are washed.
- Then the window sill is cleaned.
Getting to work
So, we begin to wash the windows from the frame. Do not forget that cleaning should be done from two sides - external and internal. We apply the chosen product (how to wash the plastic windows, we already found out) to the surface and rub it with a rag or sponge. The frame needs to be processed around the perimeter, without passing the hidden zones. Pay particular attention to the joints and rubber seals between the glass and the frame. Dust is most often clogged here. In advanced cases, you can use a hard sponge and an aggressive cleanser. But with the latter it is better to work in protective gloves.
After that we proceed to the cleaning of the double-glazed windows. Please note - the surface is cleaned from top to bottom. Spray the window cleaner and wipe dry with a flannel cloth. If these are serious contaminants, powder can be used. However, remember that after it stains remain. Therefore, be sure to finish at the end with “Mr. Muscle” or any alcohol-containing product in the form of a spray (“Wedge”, “Seth”). So we get rid of stains and stains.
Windowsill
Now we pass to the final stage - cleaning the windowsill. First, it must be treated with a dry, and then with a damp rag from dust. Do not miss the voids that are hidden by side plugs. If spots remain on the windowsill after the initial treatment, we apply the appropriate cleaning agent (powder, soap solution or strong gel). If the stain does not appear, repeat the procedure again. Next, wash the surface with water. It is advisable that it be a wet rag. Then wipe the windowsill dry. To eliminate light plaque and greasy spots, you can use the same "Seth" or "Mr. Muscle."
How to remove traces of glue and tape?
Often, after removing the factory film or after holiday decorations, traces of glue remain on the windows. It is quite difficult to clean it, but there are a couple of effective ways:
- Vegetable oil. Which one to choose? It can be any oil - olive and even sunflower. How to clear a window this way? We apply liquid to the sponge, and then spread it on the surface. After 10 minutes, the particles of glue and tape are softened and they can be safely removed with an ordinary paper towel.
- Alcohol or vodka. We wet the liquid with a cotton swab and wipe the desired area until the glue completely disappears. You need to rub carefully, with great effort, without missing a millimeter.
- Stationery Eraser. Also suitable for removing scotch tape. But it is effective only if the glue has not dried out very much. The eraser also leaves behind trash, which also needs to be somehow removed from the window and window sill. But in the absence of oil and alcohol, this is a very effective method.
Conclusion
So, we found out how and how to wash plastic windows and window sills. As you can see, the procedure is quite easy, but you need to know some nuances.