For a well-educated person, a trip in a dirty car is considered a sign of bad taste. There are two ways to put the car in order: using the services of a car wash or using several buckets of water and a rag. The first option, if you use it constantly, will lead to high costs, the second is inconvenient, it takes a lot of time. However, a self-made car wash will significantly simplify and speed up the process.
There is, of course, industrial equipment equipped with a high pressure pump, but its cost does not contribute to mass distribution. The conclusion is obvious: a minimo-do-it-yourself kit made from available materials is thus an inexpensive means of solving the problem. It is unlikely that it will be possible to repeat an industrial design in artisanal conditions, and its cost will be prohibitive.
Accessories for a home-made car wash
Readers are invited to the project of the simplest device for washing the machine. A polyethylene canister with a volume of 10 liters is well suited as the basis and capacity for water . Liquid is supplied to the brush with special channels by a pump, which are used in the windshield washer of a VAZ-2109 automobile.
The electric motor of this product is powered by a car battery and plugs into a standard cigarette lighter socket. To supply water to the working area of the brush, a silicone hose with a diameter of 6 mm, enclosed in a larger protective tube, is used. Such a car wash with your own hands is going literally on your knee, for several hours, and is almost always ready for use for its intended purpose.
Making a compact sink
First you need to make improvements to your canister. The most advantageous location of the pump is at its lower point. In the bottom we drill a hole of the desired diameter and insert the pump into it through a special rubber sleeve. Now we connect the supplying six-millimeter pipeline, previously threaded into the protective hose. It also conducts control wiring to the push-button switch located on the brush.
A self-made car wash needs the protection of work units. The casing is cut from another canister, put on a working container from below and fixed in this position. In the protective case, cut a hole of the desired diameter, through which the hose and wire will be removed for connection to the on-board network. Field tests showed the high efficiency of the device, which allows washing the machine without soaking hands.
Car wash business
The proposal to take a bucket with a rag or a homemade device in order to earn some pocket money is good for a teenager. For a serious matter, a room with a water supply system, a sump for used water and all necessary equipment and devices is necessary. Do-it-yourself car wash construction must begin with the acquisition of a land plot and paperwork.
When erecting a building, you need to take care of the heating system. Otherwise, the provision of services to bring the car in proper form in the winter will be impossible. A modern car wash, built with your own hands, will bring a good income to the owner, especially in large cities. After all, here most car owners cannot deal with the process of washing a car on their own.