Today, many people are interested in how to make smoke out of paper. It should immediately be said that this process is simple, but dangerous. Therefore, if you can do without the presented item, then it is better to refrain from its construction. If you risk trying, then be extremely careful and follow the instructions exactly.
Before making a smoke exhaust from paper, you need to prepare all the necessary material. For work, you will need old newspapers, nitrate, a plastic bottle (for breeding fertilizer), as well as a case for the product (you can use a tin can from under the
energy drink). Now we begin to manufacture a solution for impregnating paper. For this, 300 g of saltpeter should be dissolved in one liter of water. To dissolve the substance well, the container should be thoroughly shaken. The amount of solution depends on the number of checkers.
If foam has appeared on the surface of the liquid, then it must be removed. Now you can screw the sprinkler onto the bottle and begin the sheet soaking procedure. If you know how to make paper smoke , do not forget to follow safety rules. Spraying newspapers is better on the street. At the same time, the surface on which the sheets will be laid should be smooth and clean. The next piece of paper should fit on already processed.
Before making a fume out of paper, stock up on gloves, a respirator and
goggles. Since the solution can drain from the edges of the paper, before stacking the next sheet, the previous one needs to be slightly damp. After all the newspapers are stacked and moistened with nitrate, they should be turned over and allowed to soak well. The next step is to dry the sheets. To do this, they can simply be hung on wooden blocks. However, an important circumstance should be taken into account: in no case should this procedure be carried out in the open sun.
Next, you will learn, in fact, how to make smoke from a newspaper. This work will not take much time. To begin with, you should bend all the sheets several times in the middle. Next, each element must be very tightly twisted to the middle. At this stage, the elements will be nested one in the other, and you need to make sure that they are pressed as tightly as possible.
After you put the last curled sheet inside, you can wrap the product with tape. That paper, which will peek from the ends, needs to be well pushed inside. In principle, after this the product is already ready for use, you only need to insert a small wick for ignition. If you want the paper smoke to look beautiful, you can insert it into a can. To do this, the top of the case must be cut off. Please note that the newspaper bundle should fit snugly against the walls of the can. If there is a gap between them, then the flue must be additionally sealed with paper.
Be careful as you work, as nitrate can adversely affect your health. During use, checkers should be twice as careful and accurate. Do not work without protective clothing!