Do-it-yourself garden cart can be made. She will become an indispensable assistant to the summer resident who moves fertilizers, building material, garbage and soil. If you have a car at hand, then you will make your country life easier and save your strength. However, for starters, it is important to familiarize yourself with how to make such a design yourself.
Making a one-wheeled trolley
The work on the manufacture of such a cart must begin by determining the dimensions of the future design. The parameters will be determined by the volume of capacity that will form the basis. Based on this, you should choose a wheel and frame. Among the additional elements should be highlighted levers, handles, ribs and base. You will need racks, emphasis, trims and transverse ribs.
After that, you can prepare the tools, namely:
- grinder;
- drill;
- saw for metal;
- screwdriver;
- hammer;
- welding inverter.
Among the materials should be highlighted:
- the handset;
- steel sheet;
- corner for support racks;
- nuts
- thin-walled tube;
- cotter pins.
As for the sheet of steel, its thickness should be 1 mm, while the area of โโthe sheet will be equal to 2 m 2 . A tube will be used as an axis; it can be replaced by fittings. Corners should be prepared for support racks, but for cargo racks and handles a thin-walled tube will be needed, its diameter should be 20 mm.
Trolley assembly
If you will make a do-it-yourself 1-wheel garden cart, you need to follow the technology. According to the sketch, markup should be performed, at the next stage, you can cut the blank for the body. From the elements you need to assemble the body using welding. Given the parameters of the body, you need to assemble the chassis.
Lining reinforced to the base. The latter are fixed racks. Next, you can begin to weld the ribs. A body is installed on the assembly, it should be welded to the ribs. The remaining rib should be attached to the upper edge of the body and fixed by welding. Leverage should be welded to the lower as well as upper rib and body wall. The pads are fixed on them.
If you will make a garden cart with your own hands, it is recommended that you first consider the photo. This will allow you to avoid mistakes and determine the design features of the product. At the next stage, the emphasis should be fixed to the body. In order for the trolley to be more rigid, it is necessary to supplement it with ribs. Planks are fixed to the base, in which holes should be made previously. An axle is inserted into the wheel, the first of which must be fixed. On this we can assume that the assembly of the product is completed.
Making a two-wheeled trolley
If you compare a metal trolley with a wooden one, the first will be collected from top to bottom. The dimensions of the capacity in this case will also determine the size of the frame. It is important to check the tightness of the trough, then with the help of the trolley it will be possible to transport even pasty or liquid loads, while they do not leak and do not stain the garden area.
Making a 2-wheel garden trolley with your own hands, at the next stage you can start welding the frame. This is due to the fact that with the help of bolted joints, strength cannot be achieved. A handle should be welded to the frame, making it in the shape of the letter P.
The upper crossbar should be smooth, it should be parallel to the ground. For the frame of the trolley, pipe trunks or fittings should be selected, the last of which will have a diameter of 12 mm or more. However, pipes are preferable, because their welding provides higher strength. Reinforcing bars will act as reinforcing jumpers.
Wheel installation and assembly work
When a 2-wheeled garden cart is made with your own hands, at the next stage you can proceed to fasten the wheels. They have to be welded to the lower parts of the frame. This must be done separately. The body can be bolted, for this purpose, holes should be drilled in the tank and frame, where the bolts will be installed after. On the reverse side they must be tightened with nuts. Between the plane of the container and the heads of the bolts it is necessary to put sealing washers.
You can use pneumatic wheels that are pumped up by a pump. This will increase the load capacity up to 80 kg. In addition, the car will increase patency. The advantage of pneumatic wheels is also the fact that the brake control can be brought to the handle. In this case, the trolley can be moved even on inclined planes, while the load does not crumble, and the trolley does not tip over.
Making a wooden trolley
Summer gardeners make two-wheeled carts with their own hands quite often. This approach will be easiest. Sophisticated equipment such as a welding machine or metal cutting saw is not needed here. The tree can be processed according to the standard scheme. However, a wooden wheelbarrow will be inferior in terms of carrying capacity and durability to a metal counterpart.
It is based on a frame, which should be made of thick boards, put together in the form of a rectangle or square. The bars must have a square section with a side of 70 mm, otherwise only leaves or hay can be transported on a wheelbarrow. The frame of the beams is assembled with an overlap, screws should be placed in the corners to strengthen the structure with metal corners. It can be supplemented with overlappings.
If the farm has antiseptic compounds, then the wood should be treated with them in advance, then the car will be able to withstand dampness and decay. To the bottom of the frame should be fixed rails for ball bearings. Depending on the number of wheels, their number may be equal to one or two.
Methodology
A wooden trolley is usually made of two wheels. If there is a finished axle on which wheels can be mounted, then a block with bearings will not be needed. The wheels are fixed on the skeleton of the trolley. At this stage, you can fix the flaws of the wheel mount. The handle of the structure will have a large load. Therefore, it is desirable to make it from metal. As a metal handle, a scooter wheel or a long steel stick is suitable. The fastening should be hinged with a latch. This design will allow fasteners to be reliable and fold during storage.
Four-wheel trolley made of barrel or metal
Cart garden 4 x wheeled do-it-yourself can be made of sheet metal. Its thickness may be equal to the limit of 2 mm. The body is assembled from the material, after which it is necessary to weld the chassis and handles to it. Depending on what will be the load on the finished product, you can use wheels from a bicycle, moped or motorcycle to it.
By making a garden cart with your own hands, you can reduce the cost of it if you make the box from an old iron barrel. It is necessary to begin work with the manufacture of a supporting structure. It must be in the shape of a rectangle for 4 wheels. To do this, use a light metal profile, it can be a pipe or a product of square section. Wheels are installed on the sides of the structure, while elements should be installed at the right angle as handles. Half the barrel must be installed on the frame. Bottom welded pipes or arcs. This is necessary to ensure the required capacity.
Conclusion
If you decide to make a garden cart with your own hands, then the wheels for it can be purchased ready-made in the store. However, if there is a desire to save additional money, then you can use the wheels from an old moped or motorcycle. It is better to choose pneumatic wheels, as with them it will be possible to increase the carrying capacity of the car and increase its cross-country ability on uneven surfaces.
It is noteworthy that a do-it-yourself garden trolley can be made even from unnecessary things and by the type of scrap metal and old metal beds. But in this case, the master should have the skills of a welder.