A gazebo is a small architectural form that can give the territory a special charm. In it you can arrange pouring, family tea parties and even relax with friends. Alone there you can simply enjoy the surrounding landscape.
When choosing the design of the gazebo, you can give preference to air structures, where air and sunlight will pass. Solid walls in this case will not limit the view, and the view of the surrounding landscape will be open. Such a structure can be made of different materials, but the true lightness will be betrayed by wooden lattices for the gazebo, which it is possible to do with your own hands.
Arrangement principle
The lattice mentioned above is also called trellis and is a decorative fence that adorns the structure. She will make the gazebo attractive and elegant, fitting it into any exterior. Wooden lattices for the gazebo, photos of which are presented to be considered in the article, can have a different configuration, and the dimensions will determine the appearance of the entire building.
In the manufacturing process, you can use maple, pine, beech or oak wood. Lattices are installed separately, they can be directed at an angle of 90 degrees to the fence or be in separate groups near the walls. The latter solution allows you to hide unattractive places and even power shields. Lattices can be built in the form of repeating elements, connecting the atmosphere with the style of the house. You can install trellis on the frame or spacers.
Types of Gratings
If you decide to make a wooden decorative lattice for an arbor with your own hands, then you need to decide on its variety. The design can be solid filled, slotted or wicker. It can be made folding, beam or round. Sometimes perform crystal lattices. If it will serve as a support for plants, for example, flowers that can curl horizontally or vertically.
How to grill yourself
To make a decorative lattice, you need to prepare a frame. The bars are joined by a spike method using carpentry glue. You can use other connection technology. The dimensions of the frame can be selected individually, it should go into the opening, the main thing is to exclude gaps, you can make it slightly smaller. In this case, the fastening can be provided with strong ropes. This version of the trellis looks elegant, as if it hangs in the air.
Rods or strips may be elements of filling. The first method is ideal, because strict geometry will be absent, so you can easily hide flaws and roughness. You can fix the rods with nails or screws, sometimes twine is used.
As for the frequency of weaving and the angle of inclination of the elements, these parameters do not matter. Lattices just have to look the same. Performing a wooden lattice for a gazebo with your own hands, a photo of such structures should first be considered. This will allow you to understand that the rails are mounted parallel to each other, and after - across. It is better to try to form an angle of 45 °. Reiki prepared in advance, their number should be sufficient. Decorative elements are processed at the procurement stage.
Material preparation
If you decide to make a grate, then you should stock up on material, as well as tools, among them:
- spike connections;
- bars;
- nails
- hammer;
- self-tapping screws;
- hacksaw;
- reiki.
The bars should be made of wood, and their cross-section should be equal to 20 x 40 mm. As for the rails, they should have the following dimensions: 10 x 20 mm.
Work algorithm
Quite often, home craftsmen make wooden lattices for the gazebo with their own hands. You can do such work yourself. For this, each element is treated with varnish, paint or impregnation. This must be done while the rails are disassembled. Components must dry, only after you can start assembling.
Mounting is carried out by a threaded connection. The corners are fixed with self-tapping screws, this will provide maximum structural strength. From smaller rails, a fold should be filled, positioning along the edges of the bars. The lattice is assembled from them. Installation of a fold is carried out with preservation of traditional crossing. As soon as the design is almost ready, two frames should be superimposed on each other, preserving the diagonal pattern.
Methodology
The frames must be connected carefully: each must be sized and securely fixed with self-tapping screws. If the trellis is planned to be used as a basis for plants, then rectangular weaving will become optimal. When wooden lattices are made for the gazebo with their own hands, they are often quite often located in the opening, which is closed on all sides. In this case, you should not create a fold on the edge.
If the grille is planned to be installed in a wall panel, then between the halves it is necessary to lay a mosquito net, which will protect against mosquitoes and flies. In some cases, a wooden trellis is installed on the lower part of the arbor, in which case the element will fulfill the function of a basement pick-up. The design will take on an interesting look, while the grill will play the role of a protective screen against rodents, insects and other pests.
By making wooden lattices for the gazebo with your own hands, you can assemble the trellis from wide slats. In this case, you can get a wall that is suitable for an open gazebo. The grill will be attached to the frame and will serve as part of the grape pergola.
Framework Recommendations
Prepared bars for the manufacture of frames need to be cut to the width and length of the opening of the gazebo, which is planned to be closed. They are interconnected according to one of the existing technologies. The joining technique may involve the use of a tenon. It is most reliable, but for a beginner, joinery will be quite difficult, so you need to cut the ends of the bars at a 45 ° C angle with a hacksaw and join them with nails or wood glue.
The second frame is performed according to the same principle, after which the sizes of the elements are compared with each other, because they should be the same. At this stage, you need to try to eliminate the errors, if any were found.
Additional recommendations for the manufacture of rebate crate
If you are thinking about how to make a wooden grid for a gazebo, then you need to get acquainted with the technology of manufacturing a fold. At the edge of the board will need to make a rectangular selection. For the reason that not everyone has a wood milling machine, one can go the easier way. For work, 8 slats should be prepared, the cross section of which will be 10 x 20 mm. For each frame there should be 4 such blanks.
These planks are fixed with nails or self-tapping screws installed around the edges. Fasteners should be flush with the outer wall of the frame. This will allow you to get the protruding frame of the crown on the outer edge. If you plan to install the grilles in a closed opening, you can refuse the rebate, which is only necessary to hide the voids between the ends of the battens.
Grid Making Tips
If you are going to make a wooden lattice for an arbor with your own hands, step by step it is necessary to consider the technology. It involves filling the internal space of the framework. To do this, take the slats of the same section as the protruding edge. In this case, the strips will be on the same level with her.
On the long sides of the frame, markings should be made according to which the slats will be placed. Indentation should be as accurate as possible. This will allow you to get a more beautiful lattice. When making a wooden grate for a gazebo with your own hands, you must remember that the length of the slats will be equal to the distance between the inner edges of the fold. If the frame will be made without a fold, then this version of the grill will be easier to make. The planks are stuffed onto the frame with some allowance beyond the edge of the frame, which can be cut afterwards.