An agricultural device such as a walk-behind tractor has not completely lost its popularity over time. On the contrary, the development of technology has provided the emergence of new popular mechanisms with a wider range of functionality.
As you know, with the help of this machine you can perform a number of tasks: transport goods, cultivate the soil and simply use as a vehicle. Since this equipment was most widely used in rural areas, you should figure out how to make such a detail as a do-it-yourself milling cutter for a walk-behind tractor. This structural element has many useful properties, but to purchase a finished device is quite unprofitable from a financial point of view, which explains the need for self-assembly.
Main functions of milling cutters for walk-behind tractor
This type of equipment is mounted, so that at any time it can be dismantled and replaced. A milling cutter is an extremely important part of a walk-behind tractor, as in the process of functioning it directly affects many factors:
- quality of tillage;
- ease of driving;
- The state of the transmission of the motoblock;
- stability of the vehicle engine.
Many owners wonder for good reason how to assemble a cutter on a walk-behind tractor with their own hands. Only with the help of this element it is possible to loosen the soil qualitatively and prepare it for sowing work, while simultaneously removing all weeds.
The main detail of any soil cutter is knives. For milling cutters of the walk-behind tractor, one can find different samples made, however, using similar technology. The quality and depth of tillage directly depends on what material is used in the production process.
Advantages of milling cutters for walk-behind tractor
Among the indisputable advantages that these details possess, it is worth highlighting the following:
- milling cutters perfectly cope with weeds, destroying them without a trace;
- soil treated with such an element is well loosened, which contributes to the mixing of its layers and has a positive effect on fertility indicators;
- with the help of such knives, fertilizers can be easily distributed.
In addition, by making such a detail as a cutter for a
walk-behind tractor, with your own hands, you can be sure that it will cope with the soil of absolutely any type, whether it is clay, moist or very hard ground. Due to this, motoblocks equipped with similar devices are common in regions with the most diverse climates and environmental conditions.
Types of mills for motor-cultivator
The development of agricultural machinery was reflected in the construction of similar equipment. So, there are several varieties of cutters, however, the most common of them are two:
- System with saber-shaped knives.
- Milling cutters, referred to among consumers as “Goose feet”, due to their not quite ordinary shape.
The first product is extremely widespread among consumers largely due to the fact that with its help you can perform almost any task. At the same time, the saber-shaped mill for the walk-behind tractor is assembled with its own hands without any difficulties. One of the advantages of its design is the ability to remove knives at any time, since they are made of steel, which, as you know, cannot be processed by welding.
Milling cutters for goose legs motoblock are more modern products. The main purpose of such a mechanism is the processing of solid soil. When using this model, it is important to remember that working with it is necessary only on level and clean ground, otherwise there is a possibility that weeds will constantly be wound on knives. This product is perfect for planting crops and can be used even in the cold season.
Materials for assembly mills
Before assembling the cutter on a walk-behind tractor, it is necessary to measure the parameters of the section to be processed, and only then, starting from the data obtained, assemble the mechanism. In order for the design to be as correct as possible, you need to have the following list of materials:
- a not very long metal tube having a diameter of 42 mm;
- details that will act as elements of loosening the earth;
- apparatus for welding;
- Bulgarian.
Dealing with how to properly assemble the cutters on a walk-behind tractor, many owners are wondering about the construction of soil cultivators. The basis of these parts may well be the springs for the car, which are bent and then welded to the main pipe at the right angle.
The process of assembling cutters for walk-behind tractor
To start work, as mentioned earlier, you need to perform measurements of the site. Having completed all the calculations, you can begin the assembly. Using a welding machine, the knives of the future cutter should be attached to a previously prepared pipe. Previously, you can sharpen the edges of the elements at the desired degree.
The resulting mechanism is fixed on the hitch assembly, and the work can be considered completed. To ensure that the entire system is functioning, you can perform a test run and adjust the device.
When assembling such a design as a cutter for a walk-behind tractor, with your own hands, it is worth remembering that you can achieve the maximum long life of a product only by strictly observing all the rules for its operation. When the mechanism is turned on, the knives must be kept at the top and in no case should they be allowed to touch the soil. Having started the walk-behind tractor, the cutter can be slowly lowered and set to work.
Additional recommendations
The easiest way to complete the assembly of such a device will be to someone who has some experience in the field of metalworking. To simplify the installation process will allow pre-compiled diagram, as well as high-quality tools and materials.
When deciding how to correctly assemble milling cutters on a walk-behind tractor, many owners are faced with the problem of making small and curly parts of a structure on their own. To do this, it is best to turn to a professional blacksmith for help, who will do this job much faster and better.
In addition, do not forget that an incorrectly assembled system entails a change in the direction of rotation of the knives, which, in turn, is fraught with equipment breakdown.
Having studied all the above recommendations, we can conclude that it is absolutely realistic to design such a mechanism as a cutter for a walk-behind tractor, it is only important to observe all the details of the work, and then the device will last more than a dozen years without the need for repairs.