Each home master will benefit from homemade products presented in the article. This will simplify not only the performance of some work, but also life. It is also important to remember what materials by type of tape can be useful.
Adhesive tape, sneakers and drawers
If you are assembling or disassembling any mechanism from small parts, it will be convenient to stick a double-sided adhesive tape on the table to fold the parts onto its surface. They will not get stuck by sticking. If you need to climb the stairs and not scratch the surface of the wall, then before installing the device for lifting to its ends, you should wrap sneakers with a clean sole.
Useful home-made and fixtures with your own hands can be done even if you have a full-fledged staircase to the second floor in the house. Under each of its steps you can make drawers, where you put the little things. Part of the steps can be made folding, fixing them on the hinges. So you can use their interior space as boxes.
Plastic windows, screwdriver and metal corner
It is difficult today to find an apartment or house where plastic windows would not be installed. If your home has such double-glazed windows, they have gaskets. If you do not want them to crumble, you can extend their life. To do this, once a year on the seals should be applied aerosol silicone grease.
Considering the little tricks for the home master, you can note the following for yourself. If there is no screwdriver at hand for small screws, you can quickly make it by sharpening the tip of the old key from a can of canned food. If you want to update the interior and hang a heavy picture, then from below it will need to provide support. This can be done by attaching a metal corner to the wall.
Mirrors, wall holes and small screws
If you fix a mirror over the upper shelf of the wardrobe, then you don’t have to climb up to see what is stored there.
When you have to drill holes in walls where there is hidden wiring, there is a risk of getting into the communication with a drill. You can find wiring in the wall using a tape recorder. To do this, an electrodynamic microphone is connected to it. The device should be turned on for recording with maximum gain. When the microphone is held along the wall, a low hum from the speakers of the tape recorder will be heard in the places where the wiring is laid. When the device moves away from the wiring, the hum will begin to weaken. Drilling is safest in the place where the hum completely disappears.
Small tricks for the home master can be useful and unusual. For example, in order to hammer a nail, it should be inserted between the teeth of the comb. So you save your fingers. A special holder for screws and nails can also be made from ordinary wooden clothespins.
Caliper, holes and shelves of complex configuration
A plastic or metal safety bracket must be fixed above the caliper lock screw. For this, two holes must be drilled in the meter’s engine, and then a thread can be cut. After these manipulations, the screw cannot be lost.
In order to get a hole of the required depth, marks can be applied to the drill with paint. Sometimes for this purpose an insulating tape is used, which is glued in several layers. But during operation, such marks may go astray. It is most reliable to put washers of a suitable diameter on the drill. This template is convenient in that it can be pulled out and adjusted by reducing or adding washers.
Small tricks for a home master can simplify his life. For example, if you want to make a shelf of complex configuration and install it in a built-in cabinet, for this you can prepare a template from stripes of cardboard. It is much easier to fit the product from it.
Fine nails, float and exhaust cock
Using a wooden ruler, to which you need to stick a small magnet, you can make a convenient tool for hammering small nails.
If necessary, you can replace a failed float tank float using a syringe of the required volume. If the outlet valve of the toilet flush tank starts to leak, you can eliminate the leak using a weight. A rubber bulb under the influence of additional weight will enter the seat more densely, while the flow will stop.
Removing blockages, cutting tapes and flattening nails
Small tricks for a home master can sometimes avoid unnecessary expenses. For example, if a blockage occurs in the sewer, the drain pipe in the bathtub or sink can be pumped vigorously using a car or bicycle pump, to which a flexible rubber tube must be connected.
Taking 2 blades, which should be fixed on a wooden block, you can cut tapes of a certain width. The material used may be polyethylene, paper or leather.
When it is necessary to drive nails into wood, this process can be simplified by flattening them. Joiners often do this with a spearhead. To do this, hit him with a hammer. If the nail is flattened, it will enter the wood and be held there due to the springiness of the broken fibers. When the nail is sharp, it can chop wood.
Thermorezak, paint and wall cleaning
Do-it-yourself fixtures for the home master will help in life if you often do something in your home. For example, you can make a thermal cutter, which will be based on a soldering iron. This fixture is designed for a powerful electric soldering iron. It should be cut from an iron or steel 1.5 mm plate. Mounting should be done to the tip of the soldering iron with clamps. Working edges should be sharpened. Now we can assume that the soldering iron is adapted for cutting foam and various materials from plastic.
Using tips for home masters, you can avoid a lot of trouble. For example, if the paint remains in an uncorked jar, after a certain time, it forms a fairly dense film due to exposure to air. In order to eliminate such inconvenience, after operation the lid should be tightly closed by tapping on it with a hammer. The jar should be stored upside down. In this case, the air will be at the bottom, and although a film is formed there, it will not interfere with work next time.
Considering useful homemade building materials for the home master, you can highlight for yourself a hack on how to clean the ceiling and walls from the water-based layer. To do this, old newspapers are glued to the surface. Once the glue dries, newspapers can be removed with a coat of paint.
How to saw off the edge of plywood. Drilling holes in the tiles. How to replace a vice
In order to make the sawn edge of the plywood smooth, it is cut with a sharp knife along the cutting line. In this case, no burrs are formed on the cut. Another method is known. It consists in wetting the surface of the plywood along the cutting line with hot water. The liquid will help to cut the asbestos-cement sheet, because it softens the material, which means it will be easier to cut.
If you are interested in useful home-made products and appliances, you can do many of them with your own hands. For example, so that the holes in the tile during drilling are smooth, and the drill does not slide off the selected point, a cross made of self-adhesive paper tape should be glued in place. Drilling should be carried out through the center and rather slowly, while there should be no pressure. If you want to make a homemade tool for the home workshop, clamps that can replace a small vise are suitable for you.
Useful homemade construction
If you pull the cord over the can of paint, you can fix the brush on it during the break or remove excess paint from the work surface. The edges of the can will remain clean, and the lid will no longer stick to them.
Useful materials
Materials for the home master can be very useful. This should include masking tape. If you stick it to your hand, you do not have to constantly run to the table when measuring. It will be possible to record the result on tape, and then transfer it all to paper. So you save time. This is especially convenient if you have to work at height.
Cellophane can also help you out. PVA glue often dries on the thread of the bottle. Unscrew the lid is not possible. To prevent this from happening, you need to take a bag of polyethylene and cut a small piece out of it. Now the thread will remain safe, and the bottle can easily be opened.