A country house or cottage should set up their owners for a complete rest in harmony with nature. Therefore, the owners of such real estate pay much attention to the arrangement of their garden. It will be nice to walk here, sit at a table on the veranda with friends. The view of the site should be pleasing to the eye.
One of the best decorative techniques will be a well made of tires yourself . It can be decorated according to your taste. It will harmoniously complement the cozy atmosphere of the courtyard of a private house. How to build a similar object will be described later.
Construction Features
Do-it- yourself well from tires in the country with your own hands is quite simple. Almost everyone can handle this. In the process of registration of such an object will need to show imagination. Since such a well is an exclusively decorative object, it should harmoniously fit into the general view of the site of a country house.
It is not practical to extract water from such a well. But to use it as a flower bed will be more than appropriate. Bright design of the well emphasizes the beauty of garden flowers. At the same time, it will be easy to choose a place to install the structure.
Each car owner also has the material to build. Old tires are used to create many sculptures. The well is one of the simplest varieties of decorative landscape art.
Functional Features
As mentioned above, a self-made decorative well made of tires cannot fulfill the functions of a full-fledged object for water production. However, such an object can not only decorate the site. Quite often, such objects help to close unseemly sewer manholes in the garden.
The well can be used as part of a drainage system. In this case, you can create the right conditions for the growth of many cultures and summer plants. This is a more complex system.
A well for collecting water can also be stored in the well. The roof of the well will protect the container from the entry of leaves, dirt and dust. The well can be used not only as a flower bed, but also as a lamp. Inside such a system, you can install a light bulb and cover it with a beautiful ceiling. In this case, you will get a beautiful composition that will decorate the garden not only during the day, but also at night.
Stages of the work
It’s quite simple to make a simple well from tires with your own hands . For this, it is necessary to carry out three successive stages of work. The first of them selects the necessary materials and tools, selects the right place to place the building in the garden. After this, a structure of 3 tires is constructed.
At the second stage, the fixed elements of the future well will need to be issued. To do this, use paint or other improvised materials. Here you will need to apply maximum imagination. The decorative design of the building should be in harmony with the general style of the exterior of the house.
In the third stage, you need to build a roof. It can have a different shape. For its construction, it is not necessary to have special building skills. All stages of the work can be completed in just 2-3 hours. In this case, you will need to prepare the appropriate tool. For more complex designs, a different technology is used.
Tools and materials
Considering ideas on how to make a well out of tires with your own hands , you need to start with the easiest way. For him, you need to prepare 3 old tires. In addition to the main component of the structure, you will need 2 logs with a cross section of 10 cm and a pair of beams of 1 m each. You should purchase 4 beams with a length of 1.5 m. A support for the well will be built from these elements.
Also need boards for the roof. A lot of building material is not required. 6-8 boards are enough. All elements will be assembled together using self-tapping screws, metal corners and nails. Therefore, they should also be prepared in advance.
If you plan to paint the body of the well, acrylic paint is purchased. You can purchase several colorful jars. If a flower bed is built in the well, flower pots will be required. After the preparatory work, you can proceed to the construction of the well.
Well construction
Making a well from your own tires for flowers is very simple. In each tire, it is necessary to make holes for the support beam. It will also have a roof installed. Slots need to be done as accurately as possible to avoid displacement of structural elements.
The first tire is laid on the ground, making appropriate marks. Here they dig small pits for supporting posts. The base under them can be concreted. Pillars can be installed outside the tires. This greatly simplifies the work.
If the owners still decided to make cuts in the tires, then the tires must be put one on top of the other. Holes cut earlier must match completely. Then a beam is pulled through them. Both posts should be the same height. Otherwise, the roof will be uneven. Next, the supports are installed in the ground and dug them. The design must stand firmly on the ground. The area under the well should be flat.
Roof
A flower bed-well made of tires with your own hands should look as natural as possible. Therefore, to create it, it is recommended to take the usual building materials for the roof. It can be simple boards. But the form must be appropriate. Gable roofs look beautiful. However, you can make a flat variety of flooring.
Between the bars you need to install the crossbar. You can also make a grill. A roof will be installed on it. In this case, it will be easy to fix the tiles, boards or other sheet material on the supports.
If plywood will be used, it can be covered on top with roofing material, metal, bituminous tiles, etc. You can make a roof from the same tires. To do this, cut the tire in half along, and then divide it into 3 equal parts. They make a canopy over a flower bed.
Painting
A well of tires with their own hands is almost ready. Now it can be painted at your discretion. When choosing a tool for decorating tires, oil enamel may be preferred. However, experienced summer residents argue that such paint will not last long. It has to be updated almost every year.
A good option for painting tires is bitumen and acrylic paint. Well established rubber paint. It got its name because of the ability to easily stretch and taper under the influence of temperature. This paint provides a reliable coating that does not crack for many years.
The surface for painting needs to be prepared. It is cleaned with water and a soapy solution. Next, the tires need to be dried and treated with a degreaser (acetone, alcohol, gasoline). Using a wide brush, a spray gun is applied the main layer of paint. Aerosol-type products can be used. When the paint dries, you can paint the tires with a pattern. After complete drying inside, flower pots are installed on the stand.
Sewer well
Some owners of a country house decide to create a sewer well from tires with their own hands. In this case, the construction will require minimal investment. The construction is simple and quick; you don’t need to use special equipment.
However, there are drawbacks to such designs. The system is relatively short-lived. More than 15 years it can not be exploited. The mobility of the rubber does not allow the elements of the system to be sealed tightly. Over time, an unpleasant odor appears on the site. Such a well cannot be repaired. The whole procedure can be performed again.
Such a well will deepen by 1.5 m. The upper tire will protrude outward. Decorative features of this design will be minimal. Specialists recommend the use of special building materials for such purposes.
Drainage well
If frequent wetting of the soil is observed on the site, it is necessary to provide a high-quality drainage system. To do this, make channels. To collect excess moisture will be a drainage well from tires. Do it yourself with your own hands will not be difficult. All channels can also be made of tires. However, it is easier to use plastic pipes for this.
In the place of water discharge, a pit is made 1.5–2 m deep. Its walls should be 30 cm wider than the diameter of the tire. They are installed inside. Sealed fixation is possible with cement mortar. A hole for the pipe is made in the upper tire. The same wells can be made in places where stagnant water is collected. Similar structures also do not perform any decorative functions.
Having considered how to make a well out of tires with your own hands, each owner of a suburban real estate will be able to make a decorative or functional construction in accordance with his needs.