Broilers are one of the most common meat breeds of chickens. They are unpretentious and easy to maintain, but, like all living things, they need water. At the moment, there are quite a few drinkers that are sold in specialized stores, but buying them is, first of all, coughing up. Given the fact that they will need a lot, the amount will be rather big. Do-it-yourself drinking bowls for broilers are the only way out of this situation. A home-made device will cost much less, so this will allow the bird breeder to save money.
What is a drinker, what are they
Chickens constantly need a source of fresh drinking water. It is this function (water supply) that drinkers for broilers perform. With your own hands, such a device will cost much less than in a store.
In addition, there are varieties of drinking bowls that differ from each other. There are mainly three separate classes: simple, vacuum and nipple drinkers for broilers. With your own hands you can make all of the above devices, since their design is not very complicated. The most perfect of them are nipple. This is an entire system that needs some maintenance.
Do it yourself - there will always be benefits
Do-it-yourself drinking bowls for broilers (photos and instructions for applying to them can be found easily) you can do it yourself. This will save money. In terms of quality and practicality, home-made devices for drinking are no worse than factory ones. DIY made feeders and drinking bowls for broilers - it is always profitable and practical.
The difficulty of ordinary drinking bowls
When drinking birds, some problems may arise. Especially if a do-it-yourself drinker for chicken broilers is made, then it can be very light or unstable. Then the residents of the chicken coop can easily turn it over, and then the water will spill onto the floor, which then will adversely affect the birds. A factor such as instability or low weight cannot be ignored, because such do-it-yourself drinking bowls for broilers will simply prove to be ineffective.
Also, water needs to be changed often, because it stagnates. Fresh water can lead to serious illnesses in the entire stock. Especially if a broiler drinker is designed, you need to do everything yourself to ensure that the sharp edges are smoothed out and the water changes every day. The still fragile organism of the bird requires careful care.
Nipple drinker - the solution to all household problems
What are nipple drinkers useful for? This kind of device is one of the best devices for installation in the chicken coop. Due to its positive aspects, do-it-yourself nipple drinking bowls for broilers, are very common and popular.
Water does not arbitrarily flow from the drinker itself. This immediately kills two birds with one stone: firstly, you do not need to constantly change wet litter, and secondly, you do not need to run and add water to the drinker itself, because it will not roll over. If you put drop eliminators, then not a single drop will fall on the floor. Particularly active individuals that previously climbed dirty feet into the drinker simply cannot do this, since this construction is of a closed type. In addition, water consumption will be reduced , which will also save money.
To successfully introduce such technology in your chicken coop, you need to teach the chickens themselves to drink from such a device. It’s best to teach them from childhood. Do-it-yourself nipple drinker for broiler chickens is different from an adult. The difference is that the nipple on it needs to be installed a little different.
How to make a broiler drinker with your own hands
First of all, you need to determine the type of drinking bowl, and for how many individuals it will serve. If you are planning a nipple drinker, then before starting work you need to prepare all the tools and purchase additional structural elements.
Making a nipple drinker at first glance seems not easy, but in fact there is nothing complicated. It will be collected by any person who does not even have experience in this field. The main thing is to have and be able to use some tools.
What you need to create a nipple drinker: materials
How to make a drinker for broilers with your own hands, if there is almost no money for its creation? There is a simplified version of the drinking bowl, which does not require many costs for the purchase of materials. The economariant is advantageous in that it will take not only a few materials, but also time to create it. Such a simple design is very easy to create.
Of the materials for creating - a metal-plastic and plastic pipe one meter long, the same diameter plumbing "elbow" and a plug. In addition, you will need another small piece of pipe of the same diameter. It will serve as a reservoir. This will be the whole basis of the design. The most important detail is the nipple. They are of two types: one thousand eight hundred and three thousand six hundred. If broilers are already adults, then it is better to buy a nipple for one thousand eight hundred (one of them costs about fifty rubles).
What you need to create a nipple drinker: tools
First of all, you need to be able to use all the tools. If you don’t have some skills, it’s best to ask your friend or friend who knows how to use them for help. Also, do not forget about safety.
First of all, you need a drill with a drill with a diameter of nine millimeters. It is this size that corresponds to the diameter of the nipple itself. In order to correctly measure the distance between the holes, you need a tape measure. You will also need a conical tap with a diameter of nine millimeters. A tap is a device for threading holes. It is needed so that the nipple can then be screwed into the pipe. You can do without threading, but then the place where the nipples will be installed can leak. With the help of a thread, you do not have to install the nipple tightly. If it becomes clogged and breaks, then it can be easily replaced.
Valuable advice: it is best to buy nipples of foreign manufacture, since they are many times superior to domestic ones in quality. The price for them will be more expensive, but it’s worth it, because it is foreign samples that can serve for a long time and in good condition, while domestic ones are often clogged and broken.
We make do-it-yourself broiler drinkers: a photo of the device
Before you begin, you need to prepare the site. It should not have other objects that could interfere with production. The base of the drinker will be made of metal-plastic or ordinary plastic pipe. Surely a piece of pipe was lying somewhere in the farm, if it is not there, then you can buy a piece in any specialized store or on the market.
Start by drilling holes in the pipe itself. To do this, take a tape measure and mark with a marker the places where you will be drilling. It is worth paying attention: the distance between the two holes should not exceed twenty-five to thirty centimeters. It turns out that from one meter pipe you can make a drinker for four chickens. From this calculation, you can calculate how much material is needed for a certain number of birds. At each mark with a nine-millimeter drill, we make holes. This must be done carefully so that the pipe does not burst, and the holes are neat.
Threading is an important step in creating a drinking bowl for chickens. This tool has notches that form the future thread. By carefully screwing the tool into the hole, accurate threading can be achieved.
After applying the thread, it is time to start joining other parts of the pipe. A plug should be installed at one end of the plug to prevent water from escaping. From the opposite end, a knee is set at an angle of ninety degrees. The hole itself should look up. If the holes in the pipe "look" down, then the elbow should be directed up. A small piece of pipe is connected to the free end of the knee. It will serve as a reservoir.
Set the nipples
Before screwing in the nipple, wrap it with teflon tape (special sealant) so that nothing leaks. Then the nipple itself is screwed with assertive movements. Screw it to the very edge. The drinker is ready!
Check
After installing a broiler drinker, it is worth testing. To do this, observe that there are no water leaks. Nipples should all work properly, otherwise they should be replaced.