Recently, hookah is no longer exotic in our area. However, few know that it is not possible to purchase it everywhere. Also, few people guess
how to make a hookah at home. And this is very possible. First you need to collect the necessary material and the basis of the product.
For work, you will need a tube of steel of small diameter, which will be used as a shaft. Naturally, the material should be as safe as possible for human health and not cause allergic reactions. Before making a hookah at home, you should find a diagram of the structure of this product. Further, the assembly procedure will not be difficult.
As a basis, you can take a can or teapot made of metal (the latter is used most often, since it is easier to process). For smoking, you can use any thin rubber hose. And you also need to find the burner from the gas stove. In order to connect all the parts, you need to buy a soldering rod.
Since it is not difficult to make a hookah at home, then you can do it perfectly. However, one should not forget about certain nuances. Now we proceed directly to the assembly of the apparatus. First, connect the burner to the steel tube. Moreover, the seam should be completely tight. The second end of the future shaft should be firmly attached to the lid of the kettle. To do this, you need to make a hole in it, the diameter of which will coincide with the diameter of the tube.
Before making a hookah at home, you should measure the length of the shaft. After that, the tube is inserted into the hole on the lid and soldered on both sides. To make the seam neat, it is treated with a file.
The smoking hose must be attached to the spout of the kettle. To do this, part of the last element should be sawed off. The hose must be inserted inside the nozzle. The connection must be tight, so it is necessary to wrap it with electrical tape. In order to prevent the hose from popping out of the nozzle, it must be firmly fixed with a nut, which is put on the element and plays the role of a clamp.
If you know how to make a homemade hookah, and are confident in your abilities, still be careful and try to maintain the tightness of all seams. You can use foil for this. Next, a gas burner is installed on the lid, into which a small funnel should be placed. You can add tobacco to it, and it can be made from ordinary foil. A metal strainer is placed on the burner.
After all these steps, you can safely check the device for operability. To build such a design is realistic even from a usually metal can. To do this, it will be enough to make two holes in the cover (for the hose and tube) and do everything as described above.
As for the cost of such a home-made product, it turns out to be very small compared to the price of the device in a specialized store. Now you know how to make a hookah with your own hands and you can easily enjoy pleasant minutes of relaxation. Good luck