If you decide to have ducklings, then it is imperative to think about what drinking bowls will be on the territory. The simplest options are buckets, basins and bowls. But such containers have drawbacks, among them one can distinguish rapid water pollution due to bathing birds, which will certainly lead to the need to change the liquid and wash the container. Light open containers of small volume can be used exclusively for small immature chicks who are not able to overturn the structure. A more suitable solution would be a drinking bowl, the dimensions of which should correspond to the number and age of ducklings.
Making a nipple drinker
If you make a nipple drinker for ducklings with your own hands, then you can make it using the technology described below. This design is also called nipple. It can be called one of the most difficult, but at the same time convenient.
Preparation for work
A nipple drinker for ducklings with your own hands cannot be made without a square pipe, the side of which is 2.2 cm. You should choose a workpiece that has internal grooves. You need to consider the length when buying. The smallest distance between the nipples should be 35 centimeters. You will need the nipples themselves. If the bird has already grown a little, then you need to buy nipples 1800, which work on the principle of "up and down", while for small ducklings fit nipple 3600, which works at 360 degrees.
You will need a silencer for a tube, a droplet eliminator or a micro bowl, as well as an adapter, the last of which is necessary for connecting a round and square pipe. If it is not planned to connect the drinker to the water supply, then you need to purchase a water tank and a hose.
Tool preparation
Before you make a drinker for ducklings with your own hands, you need to take care of the presence of a drill and a 9 mm drill. A tapered tap will be needed, which is useful for threading. In the absence of these tools and materials, you can purchase them in the store of the corresponding goods.
Technology of work
If you make a drinker for ducklings with your own hands, you will initially need to outline a place for drilling on the pipe. A hole of 9 millimeters is drilled in these zones. The tap will allow you to thread, where you then need to screw the nipples. A silencer should be installed at one end of the tube. Next, a vessel is taken where the liquid will be. It is best to use a tank made of ordinary transparent plastic. It must have a cover.
In the process of making a drinker for ducklings with your own hands, the photo of which is presented in the article, you need to make a hole in the container, placing it in the bottom. Its diameter should correspond to the diameter of the outlet hose. Threads can be cut there, as an alternative solution, you can simply install a hose. The resulting joints are wrapped with Teflon tape, as for other places that can become a source of leaks.
Features of the work
In the process of making a drinker for ducklings with their own hands, the photo of which is in the article, microcups are located under the tubes. This applies to the nipple at 1800. If you selected a parameter of 3600, then you will need to install drop eliminators. The tube with nipples is fixed horizontally, it is important to take into account the height, which would be convenient for the chicks. In the next step, the tank is installed above the pipe, which is equipped with nipples. It is recommended to install all this indoors, as the liquid may freeze. Before making a drinker for ducklings with your own hands, it is recommended to stock up with heaters for aquariums. They are used by specialists when there is a possibility of freezing water at too low a temperature.
Production of a vacuum drinking bowl
If you make do-it-yourself drinking bowls and feeders for ducklings, then you can take the technology of vacuum construction as a basis. It will be somewhat easier compared to the above. To do this, it is important to stock up on several elements, among them the usual 1.5-liter plastic bottle. You will need a small vessel, which acts as a pallet. You can purchase it in a store of the appropriate specification.
Using a wire frame or metal profiles, fix the bottle to the wall. Water is poured into it and the cork is twisted. The bottle should be placed in the frame, placing the bottom on top. The tray is placed under the bottle so that there is some space between the neck and the bottom. In order to exclude spillage of water, the sides of the pan should be above the neck. After that, the lid is removed, which allows you to use the drinker for its intended purpose.
Conclusion
If you need a drinking bowl for little ducklings, with your own hands this design can be quite simple to make. You should not save time or effort by simply installing a large water tank. Not yet mature chicks may express a desire to swim, but such actions on their part do not always end successfully. A bird can catch a cold and even drown. Therefore, it is recommended to make drinkers yourself or purchase a factory-made device in a store, this will be the best solution, since the finished product will last for many seasons.