In a private area, there may be a water shortage problem. The fact is that not all country cooperatives have centralized engineering communications. In this case, you can make wells for water with your own hands. This procedure is quite difficult physically and requires the use of special devices (drills). Naturally, in order to dig such a structure, you must definitely find the right place. The fact is that groundwater can be too deep, and you cannot dig a hole yourself. In addition, the purity of water, the durability of the structure, as well as the complexity of the work, depends on your choice. And in the ground there may be stones or too hard rocks that cannot be manually punched. Also, the upcoming construction should be away from sewage pits, sewer systems, burial grounds and other places that contribute to the pollution and contamination of water.
Self-digging a well will be much cheaper than hiring special equipment. In this way, you can achieve depths of up to 30 meters. Let us examine in more detail two main methods for carrying out this procedure. For example, often do-it-yourself water wells are drilled using a rotary technique. However, in this case, excess soil should be allowed to reach the surface, and this requires a large number of screws. It is very difficult to independently build such equipment, so most often only one screw is used, which rotates by several people. At the same time, every half a meter the drill should be removed, and the hole should be cleaned of excess earth. To raise the auger, it is necessary to build a special wooden structure on three legs and a simple winch.
Do-it-yourself well construction for water is a painstaking process that can be carried out using a shock-rope method. Its main advantage is that you can work independently.
However, in this case you will dig a well much longer. The presented method requires the use of primitive equipment, which can be made independently. To do this, you need a pipe made of metal of the required diameter, which is tied to a three-legged wooden structure using a rope. If you want to make water wells with your own hands in this way, you should remember that you still need to drill the first half meter with a
garden drill, which should have a small diameter. Now you need to run a home-made "glass" in the prepared pit and sharply release it. So
translational movements are made: raising the pipe and its sharp lowering. After 3-4 such movements, you should get a glass and
clean the well from the soil.
A feature of this process is that you can work without a tripod. Although for this you must be very strong physically. A do-it-yourself well under water is built in the warm season. After the trench is ready, and you get to the liquid, you should strengthen the walls of the structure, equip the bottom with a special filter mesh, and also lower the pump into the hole, with which water will be supplied to the surface. From above, the well must be covered so that no debris enters it. The design is ready to use.
A home-made water well, the construction technology of which is not complicated, will help provide you with clean fluid, and in the quantity that you need.