If you need to make a plow for a winch with your own hands, the drawings of this tool must first be considered.
Features of a winch plow
It is worthwhile to understand before starting work that the ploughshare acts as a working element of the plow, which cuts the layer of the lower part of the soil. Among other elements there is also a dump, which is intended for crumbling and wrapping the earth. The field board, which acts as a tool support, is also used in the construction. It rests on the bottom of the furrow. The field board, blade, fur, as well as the stand with which the plow element is fixed, make up the body of the structure. In the ground, the hull moves in the horizontal direction, cutting off the soil, and then deforming it and turning it over.
Plow manufacturing features
A do-it-yourself plow for a winch, the drawings of which must be prepared independently, can be performed only after you study the principle of the tool. Before this, you need to make sure that you are able to work with metal, you have to bend the blade using sheet bending rollers. You can choose for yourself one of the proposed options for the manufacture of a blade body.
Features of the manufacture of the housing
When a do-it-yourself plow for a winch is made, the drawings of which will allow you to complete the work without errors, it will be necessary to form a body, taking into account that the layer of earth should rise 25 centimeters up. This indicates that the tool will experience significant stress. In addition, the surface of the body will begin to undergo abrasive wear, which entails the need to use steel structures for the manufacture of working elements whose thickness is 5 millimeters.
Features of the share
The ploughshare should be removable in order to be able to sharpen it. The manufacture of this element should be carried out using alloy steel, it may be a circular saw blade. You can use steel that has not been hardened. If there is only carbon steel of ordinary quality that has not undergone heat treatment, it can also be used, but before using the cutting surface of the share should be beaten off using an anvil in the cold state. After the item should be ground.
Blade Manufacturing Technology
When you make a plow for a winch with your own hands, the drawings of which will allow you to complete the work more simply, you need to prepare the sheet bending rolls. They will allow you to give the workpiece the necessary shape. For this, the blade blank, whose thickness is 4 millimeters, must be brought to the rollers at an angle of 23 degrees. The element must be bent, and then brought to the desired shape with a hammer.
The second manufacturing option
Initially, you need to prepare the drawings of the plow for the winch with your own hands. Only then can we start manufacturing the blade, which can be made of steel pipe, its diameter should be equal to 600 millimeters, while the wall thickness should vary within 45 millimeters. In this case, the element template must first be made from a sufficiently dense cardboard, and then put it on the pipe, so that an angle of 23 degrees should be obtained between the bottom of the blade and the pipe cylinder. The contour of the element must be marked with chalk, and then cut the oval using gas welding, then the workpiece is processed on an emery. If necessary, the form can be modified with a hammer.
Third Manufacturing Option
First you need to make the drawings of the plow for the winch with your own hands. The third manufacturing option will be the most time-consuming. The blade blank will need to be heated using the forge. After the part has to be bent along the matrix, as the last one you can use the blade borrowed from the tractor plow. The plow body must be made of sheet steel, the thickness of which is 3 millimeters.
Recommendations to specialists
By making a do-it-yourself plow for a winch, drawings, a photo of which you must study in advance, you can previously perform structural elements using thick cardboard, after the templates are glued together. If the design layout satisfies you, you can use it as the basis for the manufacture of the tool. When the main plow blanks are prepared, a steel sheet should be used for mounting the casing, the thickness of which should be 3 millimeters, while the dimensions of this blank are 500 x 500 millimeters. Using a steel sheet, 40 millimeters must be retreated from its edges. A ploughshare must be installed on the metal sheet and secured by welding on both sides. Next, you need to bring the shield under the ploughshare, given that its location should be vertical, in addition, it should go beyond the edges of the ploughshare by 8 millimeters. In this case, the rack shield should be located 10 mm above the share blade, only in this way it will be possible to exclude the fact that it will interfere with the blade. The shield must also be taken by welding to the steel sheet and the share.
Connection of elements
When making a plow for a winch with your own hands, how to make a tool, you need to know in advance. At the next stage, a blade should be applied to the ploughshare, which should be connected to this element tightly enough, there should be no gaps. The angle between the share blade and the edge of the blade should be approximately 8 degrees. If a mismatch of angles is found, the blade must be modified with a hammer. After the blade is fitted to the share, you need to grab it by welding. At the next stage, a spreader bar is fixed to this shield, as well as a base plate. The latter must be strengthened to the reference corners. The tool needs to be inspected and finally welded all the elements. The supporting corners of the share should be welded to the base plate.
Final work
Carrying out the plow for the winch with your own hands, at the next stage you need to clean the seams well, and to process the ploughshare and the blade with a sandpaper. In order to ensure the self-propelled plow, it is necessary to adapt to it a block that has two wheels.
Wheel manufacturing features
The furrow wheel should be selected so that it has a diameter equal to 320 millimeters, while its width should be equivalent to 50 millimeters. It can be made from a metal sheet, the thickness of which is 4 millimeters. After we managed to make the plow with our own hands for the winch, it will be necessary to make a field wheel with a diameter of 200 millimeters, while its width should be equivalent to the width of the base wheel. Production must be made from the same material. A wheel axle is formed from a 3/4 inch pipe. After carrying out these works, you can safely begin to use the tool. As its positive feature, one can single out that in case of breakdown you can easily repair it, since you will know its device well.