Plasma and liquid crystal TV models fill the market. They have compact dimensions and very small thickness. This allows you to install them on the walls. If the latter are made of drywall, then you should know about the intricacies of the installation of the device. However, it should not have a weight of more than 30 kg.
If you use brackets, you should choose one of their varieties:
The former are suitable for televisions of impressive weight, as they are more reliable due to their stationarity. But if you choose a movable bracket, then you can rotate and tilt the panel at a convenient angle.
Will the partition stand?
If you have a question about how to hang a TV on a wall made of drywall, then you should know that it all depends on the size and weight of the device. Huge plasma to hang on a fragile partition is not worth it. Even if there are no visible defects at the installation stage, over time, the gypsum will begin to crumble, which will entail the need to repair the wall or build a new structure.
You can use the installation method of supporting external racks. For this, wooden bars are installed for this to serve as a support. Before you hang the TV on a wall of drywall, you might think what to use as load-bearing racks. It can be simple steel pipes that can withstand such a load. Supports in this case are installed along the wall and deepen into the floor. The frame is massive, so it will be able to withstand not only the TV, but also other equipment.
Does the wall need reinforcement
By purchasing a lightweight LCD TV, you may not need to reinforce the wall. The dowel-butterfly will make fasteners, which will perfectly cope with its task. This element is fixed on the back of the wall. But if the TV is quite massive and dimensional, then you can not hang it on such a partition. You can use a profile for this. Sometimes the frame is strengthened. In some cases, the casing at the installation site of the TV is removed.
If you, like many home masters, have wondered how to hang a TV on a drywall wall, then you can follow the experience of specialists who do not advise reinforcing the partition with bars. This recommendation is substantiated by the fact that there is a risk of breaking the drywall sheet along with reinforcement. Sometimes it happens that the septum begins to crack at the seams. You can strengthen it with a profile, the thickness of which should be 2 mm. This is commonly used to strengthen doorways.
Preparation of tools and materials
Before you hang the TV on the wall of drywall without a mortgage, you must take care of the presence of some tools. Among others, a perforator should be highlighted. It can be replaced with a drill. Some people think about why such a power tool is required, because the wall is made of drywall. Equipment will be needed if the bars or profile will need to be fixed on a concrete wall.
Take care of the presence of a screwdriver, as well as a dowel-butterfly and dowel-nails. Sometimes it becomes necessary to use anchors. If you decide how to hang a TV on a wall from drywall, if there is no mortgage, then there is no need to purchase or prepare wooden blocks. Otherwise, they must be available. The cross section of the elements is square, and the side is 50 mm. Metal corners will also be needed.
Methodology
How to hang a TV on a wall made of drywall - this question is often asked by beginner home masters. For this, a bracket is usually used, which comes standard with the TV. This applies to modern models. If not, you will have to purchase it. Outwardly, you can recognize him if you remember what a butterfly looks like.
Plastic dowels are sometimes offered to the bracket. They just can not be used. When mounting the TV to a concrete wall, you can use these consumables. But in the case of drywall, plastic fasteners can behave differently. He often breaks off, in this case the TV can no longer be saved.
Features of bracket mounting
If you are faced with the task of how to hang a TV on a wall made of drywall with a bracket, then on the wall you must choose the place where the device will be located. After that, the area is marked with a marker. Using a drill, holes are drilled in the sheet, the diameter of which is equal to the corresponding value of the dowel. A self-tapping screw is removed from the latter. Butterfly is placed on the wall. The hammer should not be used.
Next, you need to screw a self-tapping screw. At the same time, it should rotate, and not the dowel head. After installing the self-tapping screw, you must make sure that it is loosened. Manipulation must be completed by fixing the TV to the bracket. Before you hang the TV on a wall of drywall with your own hands, you should consider that you should not use the manufacturer's instructions. After all, he mentions the need to attach the device to the bracket and the subsequent installation of the system on the wall. To do this in this sequence will not work. This is because the distance between the device and the wall will be quite narrow.
How to hang the TV on a flat support
Instead of a bracket, a flat support can be used. It provides a ventilation gap between the surface and the screen panel. This approach is convenient when the diagonal is not too large. If you also want to solve the problem of how to hang the TV on a wall made of drywall without an arm, then you can create a support from improvised materials. This saves money. The basis may be a metal furniture bus. Anchors for windows will act as fasteners. The tire should be fixed to the wooden block using self-tapping screws. They are screwed into holes made in advance with a drill.
The bar is attached to the wall with the bus. Anchor plates must be used to secure the screen . They are mounted on the rear panel with screws. If the plates are too long, they can be shortened by cutting with scissors for metal. The grinder is also excellent for this. How to hang a TV on a wall made of 9mm drywall? If you also asked this question, then after fixing the plate, you must proceed to fastening the screen to the bus. For this, plate hooks are used.
Mounting a ray tube television
If you purchased a TV with a radiation tube, then when you install it, you will need to work hard. The technique has an impressive weight, but you cannot install it in a niche, as it will turn out too deep. Locking onto a shelf can be dangerous. In this case, it is best to use a cantilever bracket, also called a sleeve. In this case, it will be possible to achieve a balance of functionality and aesthetics. Installation will not be difficult, and the materials will cost inexpensively.
Finally
If the repair in the room where you plan to install the TV on gypsum plasterboard has already been completed, then the easiest way will be to drill a hole in the lining and the concrete surface of the wall. In this case, powerful anchors are used. The entire weight of the TV will be distributed on the wall, and not on drywall, which tends to crumble.
Before starting work, you need to choose dowels, which will be half the success. For this, dowels and screws are usually used. Their diameter should be identical to the corresponding parameter of the slots in the bracket. It is better to do such work, having enlisted the help of another person. The point here is not power, but convenience. You will have to work with the small space between the TV and the wall. At the final stage, you will need an angled screwdriver, with which you can screw the dowels into the holes.