If the lawn or lawn has faded, then you need to provide them with an aerator. Without this device, green spaces will not grow properly, because they need air that is not able to pass through a sufficiently dense soil.
The need to use the described tool
If the plants are not supplied with oxygen, which especially concerns their roots, then they will gradually begin to die. This is true for territories whose soil is characterized by a high degree of density. You can make an aerator for the lawn with your own hands, for this you do not have to stock up on any special materials and tools. For work, you can choose one of the existing models that is right for you.
Aeration - first aid to plants
Oxygen is absolutely necessary for plants in order to oxidize minerals, as well as decompose organic matter. Without such manipulations, not a single fertilizer, watering and care will be able to stop the rotting of the grass. Lawn for any purpose, whether it is sports or universal, will begin to suffocate without such a procedure as soil aeration. This is especially true for coatings on which people often move. Need an aerator for the lawn, you can make it yourself. This is also necessary for those territories that are often precipitated. It is necessary to enrich the soil with oxygen periodically, following a certain schedule.
Frequency of soil enrichment with oxygen
Such manipulations should be performed at least once during the season. However, this is true when it comes to fairly light soils. If on your site clay soil, an aerator for a lawn with your own hands must be made, since it will be used much more often. The frequency of the described procedures will need to be increased by 2 times.
Out-of-schedule aeration should be done if the drought turned out to be prolonged. This is also true when the warm season is accompanied by endless rains. To do this, you can use electric or gasoline devices. For emergency assistance to plants, hand tools can also be used. To identify the symptoms of insufficient air that enters the roots of plants, you can use ordinary pitchforks. They need to pierce the lawn, deepening by 15 cm, if the plants in the formed holes do not differ in active life, then continue piercing in this way should be continued. It is necessary to pierce the surface of the lawn with a hand tool, retreating 10 centimeters from one puncture to another.
Machine tool manufacturing
A do-it-yourself aerator for a lawn can be easily made. To do this, you can use structures called gas ports. You can make them using ordinary shoes. In this case, nails will need to be attached to the soles. In the end, you should get shoes with spikes. In order to do such home-made products with your own hands, you need to use a pair of shoes, which in the future you will use only for these manipulations.
For the size of the shoes you need to prepare wooden boards that can be cut with an electric jigsaw. You should get something like a sole that resembles a hedgehog. It is recommended to use any boot as a template. You need to choose a board that is quite impressive in thickness. This will ensure the retention of nails in her body. It is necessary to twist long nails into the finished plates, you can use for this self-tapping screws that are screwed into the prepared soles. It is necessary that such nails enter the soil by at least 10 centimeters. Only then can the effectiveness of these works be ensured. Now you need to attach to the shoe the resulting board with nails fixed on it. To do this, you can use the straps, which are acceptable to use those that were borrowed from old backpacks. Now you need to fasten these two structures to each other, and then walk around the lawn and enjoy the effect in a few days. The lawn will breathe again.
Making an aerator for a large-area lawn
DIY do-it-yourselfers can be made for a fairly large lawn. This will not only speed up, but also simplify the work. Such a tool can be performed by any master. To do this, it is necessary to prepare a part of the pipe, which should have a significant diameter, its length should be 50 centimeters. You will need iron, as well as nails whose length is 10 cm. It will be necessary to prepare the welding machine, as well as bearings and grease tubes. The manufacturing process will not be accompanied by great difficulties. A beautiful lawn will turn out if you use equipment that is made by making a cylinder of pipe and steel. A shaft with bearings must pass through this element. Empty space inside the pipe should be filled with sand, but fine gravel should be used more efficiently. On the outer perimeter of the pipe, it is necessary to fix the nails by welding, placing them in a checkerboard pattern. The tip of the fastener must be turned outward. In the end, you should get an element that resembles a metal hedgehog.
Final work
You will be able to get a beautiful lawn if you make the tool that is described in the article. At the last stage, it will be necessary to strengthen the elements on a bracket that has a wooden handle. This will make the tool more comfortable to use. Pushing it will be very simple.
Alternative tool manufacturing
It is preferable to purchase electric aerators for a lawn in a store, but as for mechanical devices, it is quite simple to make them yourself. The first variety of tools is intended for the processing of lawns of a large area. In private ownership, the most common lawns, which have a not so impressive area. The next option for manufacturing an aerator is quite simple. For work, it will be necessary to prepare a screwdriver, steel or wooden plates, the width of which is 5 cm. As for the length of the plate, it can have any dimensions. Such an aerator mechanical for a lawn cannot be made without the use of self-tapping screws.
Self-made tool technology
Holes will need to be made in the plates, positioning them so that they are staggered. Next, using a screwdriver, you must install the screws. The plates can be mounted on a frame, which will simply hit the surface of the stands. An aerator for a gasoline lawn, of course, will allow you to perform work in a shorter time, but its use involves fuel costs, which increases the cost of maintaining the lawn. This is not always welcomed by those who keep the lawn for their own pleasure in the countryside.