The new generation of gel polishes is reluctant to dissolve with special fluids, and so many people have a desire to cut off the coating. Performing this procedure is not always pleasant because of the sensations that are transmitted by coarse abrasive files. In addition, you can injure delicate skin near the cuticle or accidentally saw through the side roller. And files of smaller abrasiveness can cause such friction that it becomes hot. And it will take a lot of time to remove the gel with such an instrument. It is much more convenient to do this with a special cutter.
There is a special ceramic nozzle for a manicure device, which provides a soft removal of the material and does not heat up. This is an expensive thing, its price ranges from 600 to 1000 rubles, depending on the manufacturer. But she still needs to buy additional equipment.
What is the name of the device that removes gel polish
All manicure devices are divided into two large groups: professional and amateur. They differ in power: professional ones are powered from the network and have a power of 45 watts, amateur ones are powered by batteries and have a power of 18 watts. In this case, the indicator of the rotation speed of the cutter can coincide and reach 25,000 revolutions per second.
If all professional models have standard nozzles and a large selection for various operations, this can not be said about household appliances. Buy a new cutter instead of a failed one can only be professional. Unfortunately, for this reason, they often stop using household manicure machines.
In the store, the gel polish remover can be called in different ways: milling cutter, milling cutter, machine, drill. The essence of this does not change. For productive and fast work, at least 30 watts of power is required, but 60 watts is better. This is useful if over time you want to do a hardware pedicure. A set of professional cutters must include a ceramic nozzle, a reverse function and a speed switching relay. A foot pedal will greatly facilitate the work and free your hands.
Ceramic milling cutter
To remove gel polish with the device, only a special cutter is suitable. It should be made of ceramics, have notches in the form of a corncob and be of high quality. When working with such a tool, heat transfer is minimized and there is no chance of a burn.
In order not to buy a fake, you can focus on the price: good cutters cost about 10-15 dollars. Many companies produce such nozzles, but it is better to choose those that are produced by professional devices.
Safety instructions
Before removing gel polish with the device, you should familiarize yourself with the instructions:
- Before turning on the device, a visual inspection is carried out to detect damage in a timely manner. If available, you cannot turn on the device.
- Insert the nozzle all the way, then turn on the device.
- Periodically during operation, turn off the power and cool the device. Failure to do so will result in overload and damage to the device.
- If unusual vibration occurs, the unit should be turned off and a repair technician should be called.
- It is forbidden to operate the device in high humidity, as well as with wet hands.
- It is necessary to exclude heating of the electric wire from the heating battery or direct sunlight.
- Contact with chemical compounds should be excluded.
In the process, you have to change the nozzle. This should be done with the power off.
Rules for working with the device
When using the device, certain rules must be observed to avoid personal injury. You must familiarize yourself with them before removing the gel polish with the device:
- The rotation speed is set on the control panel. To do this, use the controller, smoothly switching it.
- During operation, the rotation of the cutter is controlled by the pedal. By pressing it all the way, the speed set on the relay is reached. To reduce it, you can loosen the pedal or switch the relay.
- Change the direction of rotation in three stages:
- Take your foot off the pedal.
- Wait until the rotation stops.
- Switch the direction of rotation.
During operation, the nozzle rods may become damaged (rust, dirt). Continued use of them leads to wear of the motor bearings.
The device should be stored with the rod inserted and prevent it from turning on without a nozzle.
Gel Polish Removal Instructions
Before removing the gel polish with the apparatus, check its condition, adjust it to a low speed, connect the pedal and insert the ceramic nozzle into the clamp. The working elbow should lie on the table - this will prevent overstrain of the hand and, as a result, careless erroneous movements.
- Work begins from right to left from one finger to another. The cutter should not be turned too much to reach uncomfortable places. Turn your finger.
- Work the middle part of the cutter, making movements from top to bottom. The direction of rotation at this moment should coincide with the movement of the hand.
- On the nail do not stop at one point, the cutter moves all the time. Efforts should not be made.
- After removing the material from the center of the nail, go to the side parts. They bend the roller and remove the coating, slightly tilting the cutter so that it works with the upper part - it’s smaller than the notch.
The video shows how to properly remove gel polish with the apparatus. If the operations are always performed in the same sequence, there is less likelihood of injury to both the master and his client.
Professional Tips
Experienced craftsmen indicate the subtleties of the process. Of course, in order to learn how to quickly and efficiently work, it’s not enough just to understand how to remove gel polish with the apparatus. Need practice. Here are some tips to help newbies:
- To avoid overheating of the nail plate, stroking movements of the cutter are performed. It either approaches a fingernail, then moves away from it.
- When overheating any area should go to another nail, and subsequently return to the first.
- Hand movements with the machine in operation should only be in the direction of rotation, otherwise the cutter will slip off the nail and could cause injury.
- Milling cutters are similar, and it is easy to confuse for a beginner. Hold the ceramic milling cutter separately.
- Daily cleaning of the device with a brush and wiping with a soft rag will keep it working.
Disinfection and sterilization
The gel polish remover can become a breeding ground for infections if sterilization is neglected. In salons, glasperlenic sterilizers or dry heat cabinets are used. At home, you can use the method of soaking the removable parts of the device in a disinfectant, which can be purchased at a specialized medical store. Instructions and exposure times are indicated on the packaging.
The tool cleaned and washed under running water is wiped and placed in a kraft bag. Then preheat the oven to 180 degrees and place the craft package in it for fifteen minutes. Store the tool without removing it. It remains sterile for thirty days.
How not to damage your nails
Many people care about the question: how to remove gel polish from the nails with the device and not damage them? During the operation of the cutter, the gel polish is removed from the nail layer by layer. First remove the top, then the color layer and the base coat remains. In some cases, they remove it, but this is extremely rare.
The wizard focuses on the base coat, which usually has a slightly opaque transparent appearance. This layer signals that it is time to stop the removal of material. If you still need to remove it from the nails, this can be done with a file and a buff or, if the material is soluble, using an acetone-containing liquid.
The most dangerous place where traces of the cutter may remain is the cuticle area. The nail is weaker here, and even one careless movement can leave a mark, which then will grow for a long time. Therefore, some prefer to work on the cuticle with the upper part of the cutter, where the incisions are very small.
How to start a home master
When purchasing a kit for applying gel polish, you should also purchase an apparatus for removing it. Often the cost of the apparatus and milling cutters to it exceeds all other materials and equipment. But it is important to remember: a purchase is made only once, and it is very difficult to do without an apparatus.
There are professional courses that introduce the basics of using the device. At large exhibitions dedicated to beauty salons, eminent masters advise for free. Before you begin, it’s best to gain knowledge. This applies to the operation of the apparatus, coating and various designs.
Then, for a beginner, there will be no difficulties with how to remove gel polish with the apparatus at home.