The new iron pleases its owners with cleanliness and brilliance. Unfortunately, this does not last long. It is enough to choose the wrong temperature while ironing one or another thing, so that a deposit forms. Pouring water from the tap leads to the formation of scale. How to clean the iron, return it to its original beauty? The methods that are described in the article will help to cope with this task.
How to clean an iron from a burnout at home
What are the ways? How to clean the iron from the burnout at home? Mild tools are listed below:
- salt;
- paraffin candle;
- table vinegar;
- hydrogen peroxide;
- baking soda;
- nail polish remover;
- Toothpaste;
- pencil for cleaning the iron.
We must not forget that Teflon or ceramic soles should not be rubbed with abrasives. Sharp objects, such as a knife, should never be used for this purpose. It is so easy to scratch the sole, which will lead to improper operation of the device. It is better to dwell on one of the methods that are described in detail below.
Salt
How to clean the iron with salt? In addition to this, the product will need a paper sheet. Salt is poured on it evenly. Then you should turn on the device, let it warm up. A hot iron should be driven on a paper surface until blackness disappears. If necessary, the procedure can be repeated several times.
Paraffin candle
An ordinary paraffin candle will help to cope with the burnout . This product must be wrapped in a cotton cloth. Then you need to rub the hot sole of the device in a circular motion.
We must not forget that the candle will melt in the process. To protect the furniture and flooring from paraffin, you must hold the iron over a layer of newspapers or a pallet. After disposing of the appliance, you must carefully collect the remnants of the molten candle and dirt.
This method is not suitable if the iron has openings for steam, a relief working surface. Paraffin must not be allowed to enter the recesses. Otherwise, you can hopelessly spoil things during subsequent ironing.
Hydrogen peroxide
How to clean the iron from the stick? In solving this problem, hydrogen peroxide will help. In a three percent solution, a piece of cloth or a cotton swab should be moistened. Then you can begin to clean the device. Dark spots from the surface must be wiped thoroughly and with effort. Peroxide will dissolve plaque, which will simplify its removal.
Table vinegar
How to clean the sole of the iron? For this, you can use table vinegar. In the fight against chronic stains, this product should be mixed in equal proportions with ammonia. The sole of the device is wiped with a swab dipped in the resulting solution. The iron must remain cold during processing.
If the stick remains, you can cover the work surface with a cloth soaked in vinegar. A few hours will be enough to soften the raid. Residual dirt is removed with a soft brush or sponge.
Baking soda
Baking soda also shows excellent results when it is necessary to rid the iron of burns. It is necessary to dissolve several tablespoons of the product in a glass of water. Further, a piece of matter is wetted in the resulting solution, with the help of which the cold surface of the device is processed. A damp sponge will help to get rid of iron from stains at the end of work.
Nail polish remover
How to clean the iron at home? The nail polish remover will help to cope with this task. This method is effective if a piece of polyethylene adheres to the sole of the device. When processing the surface of the iron, it is important not to touch the plastic parts. The composition of the nail polish remover contains substances that pose a threat to this material.
Toothpaste
How to clean the iron from the fabric? Quite good results are shown by ordinary toothpaste. It must be applied to the sole of the device, after which the iron turns on. It is necessary to iron unnecessary tissue until all toothpaste has been removed. You can also use the steaming function. This ensures that the paste does not get into the steam hole.
Iron cleaning pencil
How to clean the iron from burnt cloth? This is easy to do with a special pencil, which can be purchased in departments with household chemicals and hardware stores. Typhoon, Diaz, Cinderella are the most popular product listing companies.
- The device is placed on a flat surface, for example, on an ironing board.
- The iron must be turned on and heated to a temperature of 130 degrees (approximately 4-6 position). Then it turns off from the outlet.
- Next, you need to draw a pencil on the sole, focusing on the affected areas. You do not need to press hard, a slight press is enough. The substance will melt upon contact with a hot surface, as it should be.
- Then use a cotton rag to remove any loose sebum.
Before work, you must carefully read the instructions. There is information on what coatings you can use a pencil.
Alternative methods
How to clean an iron from a burnout. To do this, you can use ordinary household soap. It is necessary to warm up the device, and then rub the sole with this product. After the surface has completely cooled, soap residues are removed with a damp cloth. It should be remembered that this method is effective only in the fight against fresh pollution.
The cold sole of the iron can be treated with a paint thinner. It is most convenient to apply it with a cotton pad. You can also use a glass cleaner. It must be distributed on the sole of the device, wait a few minutes, and then treat the surface with a microfiber cloth.
How to prevent a burnout
How to make sure that you forget about such a problem as a burn? To do this, just follow the recommendations below.
- Each type of fabric needs to be ironed at a temperature condition suitable for it. Choosing it correctly will help recommendations on the product label.
- Delicate items, such as wool, are best ironed through wet gauze.
- The fabric should not be pulled while ironing. Clothing should be placed on the ironing board in a natural position.
- Items of dark fabric should be ironed solely from the inside.
- Products with spots should not be ironed. First you need to get them out.
- The working surface of the device should be cleaned after each use. The most convenient and safest way to do this is with a soft cloth.
How to get rid of scale
Prigar is far from the only problem that iron owners face. How to clean the iron from scale at home? If the device leaves red spots on things, the steam supply function does not work correctly, then it is time to deal with this problem. The methods described below will help to quickly and effectively eliminate scale.
Self cleaning function
Many modern irons are equipped with a very useful self-cleaning function. How to use it correctly? The algorithm of actions is given below.
- The tank must be filled with the maximum allowable amount of water.
- Next, the maximum value of the temperature controller is set.
- The iron should heat up, then cool down, then heat up again.
- The appliance must be tilted over the sink or bowl.
- To remove the scale from the steam holes located on the sole of the iron, use the self-cleaning button.
It is important to rinse the tank thoroughly with clean water after completion of work. It is best to repeat this action several times. Then wipe the appliance dry.
Lemon acid
How to clean the iron from scale at home? Citric acid will help to cope with this task. About 20-30 grams of the product must be diluted in a glass of water. The resulting solution is poured into the tank, after which the device heats up to the maximum. Next, shake the iron several times and press the steam release button.
We must not forget that the drink will go out with the steam dark spray. Therefore, the actions described above are best performed on a container or sink. Upon completion, the tank must be cleaned with water. Remains of dirt from the sole of the iron are removed with a soft cloth.
Mineral sparkling water
It is known that acids are present in the composition of such drinks, due to which it is easy to dissolve the precipitate inside the iron. It is necessary to pour mineral water into the tank. Further, everything is done the same way as in the case of citric acid.