Quite often, owners of their own homes think about the question of how to hide wires from different equipment. If they “show off” from the outside, then this will not add aesthetics to the interior. You will be able to cope with such work yourself, for this you will only need to prepare some tools and show imagination. Manipulation will not take much time.
Dressing wires from the TV
In some apartments and houses, quite often you can see a picture when whole lines of cables and wires come from appliances like a TV. However, they can be hidden in the wall, given some rules. Among them are the following:
- electric wires must not have insulation damage;
- it is better to place wires as far as possible from microwaves, refrigerators, washing machines and irons;
- It is important to prevent moisture and condensation from entering the cables.
If you also had a question about how to hide the wires, then it is best to place them in the cable channel, where low-voltage lines pass along the type of Internet, alarm and telephone wire. The wiring of the television cable in the apartment should be made in solid pieces. Intersections are unacceptable, and during installation works, splitters and signal separators of factory production should be used. There should be no twisting of wires, since they will not be able to create good shielding, which will negatively affect the signal quality.
Modern solution: use of the box
Before you hide the wires, you should consider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or combination materials. Such a device not only looks pretty simple, but also complies with fire regulations.
There are also disadvantages to this solution, they are in the high cost of the products, the need for the skills of the master, and the lack of recommendations for installation.
If you still do not know how to hide the wires, then you should not purchase the first box or cable channel that suits you in appearance and cost. It is important to pay attention to fittings, namely:
- stubs;
- transitions for corners;
- tees;
- peak elements.
This will not only simplify the installation, but also give the appearance of the box an attractive look.
Cable routing in the wall
Quite often, novice home masters wonder how to hide wires from the TV on the wall. If you lay them in the gate, it will become the most invisible and reliable way. Plasterboard sheets are sometimes used as an alternative solution, but their installation requires time and skills. It is best to still use the gating method, but you can resort to it only when the cable is accompanied by a repair.
The use of drywall sheets for decorating wires
Before you hide the wires from the TV on the wall, you can consider several options for solving this issue. Plasterboard sheets act as one of them. To work, you will need to prepare:
- knife;
- wire;
- electrical tape;
- strong rope or thread;
- small diameter nut.
Work procedure
At the first stage, the bracket for installing the TV must be mounted on the wall. The angles of the household appliance are marked with electrical tape. In the process, this will eliminate the likelihood that you will go beyond the zone that is hidden behind the TV.
Next, mark the location of the outlet for connecting the TV. All available cables are lowered, and markings for holes are made on drywall. The installation area of the outlet should be marked as accurately as possible, this will allow it to fit into the hole without the formation of gaps.
Before you hide the wires nicely, you should make cable channels on the wall through which the cables will be routed. A second hole is made in the lower part of the wall, through which the cable is hidden in the baseboard. The outlet can be installed behind the TV, but must be easily accessible.
How to hide wires in the cable channel on the floor
The floor cable channel is also great for decorating wires. For this, you can use a variety of fasteners, as the most common is a self-tapping screw. Once the wires have been laid inside, you can proceed to fasten the cable channel.
The distance between the screws will depend on the load on the plastic box. When working with drywall or a wooden wall, where the cable channel will be fixed, self-tapping screws are installed every 50 cm. With uneven walls, the fastening step is reduced, which allows you to hide gaps and defects. The floor cable channel must not be fixed with too long self-tapping screws. For reliable fixation, 40 mm fasteners will suffice. For screwing it is recommended to use a screwdriver with a cross bit.
Dressing wires in the cable channel with dowel nails
If the cable channel is to be fixed to a brick or concrete wall, which is quite common for modern houses and apartments, in this case, you can not do without a cable channel and dowel nails, which are also called quick installation. For work you will need a hammer drill with a 6 mm drill.
To independently fix the cable duct on a brick and concrete wall, you must perform a number of the following actions. At the bottom of the cable channel, 6 mm holes are drilled, the distance between which will be 50 cm. The box is applied to the wall according to the markings, which will allow you to mark the mounting points that coincide with the holes in the cable channel. The holes must be drilled, only after the box can be installed in its place. With a hammer, the nails are driven.
Use of "bugs" for installation of a cable channel
If it is necessary to mount the cable channel into a metal surface, the thickness of which is 2 mm or less, for fixing, use self-tapping screws for metal, which are also called bugs. On sale you can also find a special gun with which the cable channel is installed on concrete.
Original home ideas: how to make wires from a computer invisible
You can also try to resolve the issue of how to hide the wires from the computer. There are several modern solutions for this. The first idea is to disguise the cords under the table top. For this, clips are used that are mounted on self-tapping screws or reinforced with double-sided tape.
If you don’t want to spoil the table at all, you can hide the wires in an ordinary shoe box, but you can decorate it first by making a design that is close to the interior of the room. If you wondered how to hide the wires decoratively, then for this purpose you can purchase a special decorative cover in which the extension cord is hidden. It can be fixed to the desk cover.
When the cord interferes with the speakers, it is usually hidden in a case that is fixed to the back of the table. Extra cords and charging can be removed using ordinary stationery paper clips. Another original idea is to route wires through a hose. This quite often helps to solve the problem of how to hide the wires under the table in one shell, which will not spoil the interior so much.
Conclusion
A workplace using one of the above methods can be made more neat and aesthetic. This is not a big deal; cords can simply be placed in a box or secured under a table. An additional advantage is that the cords will be reliably protected from children as well as pets.