Replacing cartridges and replenishing them with ink is not so burdensome. It is difficult to wash off the paint from your hands. And no matter how you try to do everything carefully, your hands will still turn out to be dirty. In our article, we will talk about how to wash ink from the printer most effectively.
Wearing gloves is the best way to stay clean.
We all walk past pharmacies. Why not drop by and buy a few pairs of cheap medical gloves. So, just in case. They will be very helpful if you need to refuel the printer. They do not constrain movements, fit fingers well and do not interfere with the procedure. But after refueling, the skin will be clean and you won’t have to rack your brains once again on how to remove ink from the printer from your hands.
Water based paint
This is refueled by most of the printing technology Cannon, Hewlett-Packard and many models of laser printers. If time and circumstances are running out, and you don’t have gloves, you will have to get dirty.
Those who get dirty should immediately start washing off the coloring matter, since after drying this paint will wash off much harder. There is nothing to use except soap. It is best to choose a household.
A special warning regarding warm and hot water. The paint is washed off only cold, because under the influence of high temperature it tends to eat into any surface, in this case, the skin. How to wash ink from the printer if it is dry? In this case, you can try to get rid of it using more aggressive methods and means, which will be discussed in the next section.
How to wash off ink from an inkjet printer?
Since removing ink from an inkjet type printer from your hands is a more time-consuming task, you will need heavy artillery from such means as:
- Vanish Oxi Action;
- hydrogen peroxide;
- solvents for oil paints;
- bleach or products containing sodium hydrochloride.
The fact is that the base of the ink, which is filled with ink cartridges, is extremely corrosive and has the ability to penetrate into the surface layers of any materials as soon as possible. It is also more resistant to leaching, and therefore it is not so easy to get rid of it with ordinary soap and water. You have to resort to tools that can either dissolve the components of the paint, or rinse / clean them together with the upper layer of the epidermis.
Actions depending on the applied means
So, how to wash ink from a printer with ink cartridges? We dwell on what is at hand. Do not forget that all of the above fluids are harmful to the body, and you should be extremely careful to avoid getting them in the eyes and mouth. In this case, start with the Vanish Oxi Action detergent and then go through the list:
- In the case of Vanish Oxi Action, we just take a sponge, soak it with a product and actively contaminate the skin surface with three previously moistened under water with it. Hard jugs are welcome. Then wash off the product under running water with laundry soap.
- If, apart from hydrogen peroxide, there is nothing at hand, it will do. True, they will have to be rubbed more aggressively. For such cases, pumice is best suited. Wet with peroxide, three pumice stones, rinse with water, again wet with peroxide, three, rinse, and so on until the result is satisfied.
- How to wash ink from the printer with your hands, if not with a solvent for ink? Only it is necessary to use a solvent for oil paints, since the ink for the printer has a similar basis. Despite the fact that the components of the coloring matter will dissolve in the solvent, the dye that has eaten into the fabric, again, will have to be wiped off with a pumice stone. As with peroxide, you may need to repeat the procedure several times.
- Use bleach and products containing sodium hydrochloride with extreme caution. In some, contact with similar chemicals can cause an allergic reaction. Therefore, it is worth knowing about the ability of your body to withstand such substances before you come into close contact with them. The ingress of such liquids into the eyes can even end in disrepair. If you are confident in yourself and your body, we pour a small amount of bleach (for example, "White") on a sponge and three contaminated areas. Then thoroughly wash everything off with soap and water two to three times.
Non-standard, but effective and safe method
Many do not want to mess with chemicals; they can also be understood. Everyone values their health. But how to remove ink from the printer from the hands in this case? The effective method is a large wash, in the literal sense of the word.
Remove all bedding from the beds - pillowcases, duvet covers, sheets, put in the bathroom, soak and then wash all this stuff by hand. This is a great way if you do not know how to wash the ink from the printer off your hands. With grinding, as our grannies washed, when the washing machine was considered an innovation unavailable on the budget. A washboard is great. Removing a bunch of laundry, you will notice that your skin has become not only pristine white, but also printer ink has come off it.