The bath is associated with a hot steam room and fragrant brooms. But a shower under such conditions does not always seem appropriate, but a modern person can hardly do without it. It would be much nicer to stand under the warm trickles of the soul than to dabble with buckets and basins. Before and after the steam room, freezing rain can replace an ice hole or font. In this regard, many owners of suburban real estate and private houses in the city wonder about how to make a shower in the bath.
Arrangement options
Some home masters believe that a cold shower will be enough for the bath, which will provide contrasting procedures. To bring hot water to it, according to some, is an excess. In this case, you can do without complex manipulations by installing a bucket-waterfall.
This device is usually located above the door, and using a special mechanism, the bucket can be knocked over. To fill it, you will have to install a crane. When building a new bath, a separate room for the shower should be provided, where you can enter from the dressing room.
An alternative solution is to select a corner in the washing. In the existing bathhouse for these purposes, you can allocate space, the dimensions of which will be equal to 1.2 x 1.5 m. You can attach a shower with an entrance from the dressing room. Some home masters even install a shower cabin with hydromassage and other pleasures. However, it is not always possible to fit into the appearance of the wooden interior of a traditional bathhouse.
How to deliver water
If you wondered how to make a shower in the bath, then you should take care of the water supply as well. When the central water supply is connected to the cottage or there is an individual water supply from a well or a well, you only have to stretch a pipe branch to the bathhouse, providing for heating of the shower water. If the bath is heated exclusively by the stove, and you are sure that the shower and hot water for the bath are incompatible, then to ensure pressure, you can install a storage tank on the roof or under the ceiling. In this case, the shower is located next to the firebox.
If the pressure is too weak or water is supplied from the well, then for the pressure it is necessary to take care of the pump. He can be:
- deep;
- submersible;
- superficial.
The first variety is able to provide water from an impressive depth. Such a solution is suitable for a well with a small diameter. Submersible pumps can be used to supply water from shallow sources like streams, rivers, reservoirs and lakes. Surface pumps are capable of delivering water from 7 m.
More about the choice of pumping equipment
Before you make a shower in the bath with your own hands, you should take care of what equipment will be used to supply water. The calculation of the power of such devices should be entrusted to a professional. Selection of equipment is carried out depending on the type of water source.
It is important to consider the source depth as well as the pressure loss. Surface pumps are convenient for their mobility. If desired, they can be transferred to another source of water by disconnecting the hose. Preferred models with float switch. In this case, the equipment will be automatically turned off: if the water level drops, this will not allow the device to burn out. To compensate for the loss of power, the suction units are sometimes supplemented with injectors, which help maintain optimal water circulation.
Well owners also sometimes wonder how to make a shower in the bathhouse with their own hands. Such consumers should choose a well pump, which is used for deep wells. For the latter, submersible pumps are suitable, which are cheaper than well pumps, but have outstanding technical characteristics.
The method of heating water
If you are faced with the question of how to make a hot shower in the bath, then you should worry about the way of heating. This possibility will depend on whether the house is connected to a gas distribution line or power supply lines. In extreme cases, you can use your own electricity from the generator. Concluding, we can say that among the methods of heating water there are the following:
In the absence of sources of thermal energy, the old method of heating water — the furnace — is often used. To do this, install a tank, which can be built-in or remote. In it, water is heated from combustible firewood and distributed in the washing sector, as well as the storage capacity of the shower.
Profitable Solutions
Before you take a shower in the bath, a photo should be considered. Perhaps they will allow you to understand which solution is better to give preference. If the cottage is connected to a centralized gas supply system, then for heating water, you can use a gas water heater, which is represented by a gas column. It will heat running water, with the help of it it will be possible to prepare water for the future. In this case, it will be pumped into the storage tank.
An alternative solution is electric heating. It is represented by inexpensive and convenient water heaters, which can be storage or flow-through. Instantaneous water heaters do not have a storage tank. They are heated by a jet of water passing through the heating elements.
How to choose pipes
Before you make a shower in a wooden bath, you should choose pipes for it. For this system, the same products are used that are used for water supply and heating, among them:
- metal-plastic;
- copper;
- polypropylene.
If we take into account the prices of copper pipes and the features of their installation, then the popularity of polypropylene and metal-plastic products is much higher. They are cheaper, and installation is very simple, so you do not have to invite specialists. Choosing metal-plastic pipes, you will not be disappointed, because they are not afraid of corrosion, they are flexible, plastic and easy to install, like polymer products. Among other things, metal reinforced and durable.
How to drain
Quite often, home masters ask themselves how to make a shower in a bath, you can install such a system yourself. For this, it is important to study what technology to drain. When designing the system, you should consider the presence of a concreted pit. Used water will flow into it, which goes through the trap. Then sewage will be discharged into the pit outside the building.
The same route is used for wastewater from the shower room. To do this, equip the appropriate trap in the floor by connecting it to the pipe of the storage pit. Some integrate a shower drain into the sewage system of the house. If you use a cesspool, then it will be filled with this approach rather quickly, you will have to invite a cesspool machine more often.
Heat exchanger shower
If you, too, were among those who thought about how to make a shower in a bath from a heat exchanger, you can save on electricity. The basis of such a system will be a bath stove. A tank for heating water should be installed on it. It can be located in another room. On sale today you can find stoves that allow you to use the thermal energy from burning wood to heat water. These devices are ovens with a tank, which is located on top.
The heat exchanger is used for heating cold water, as well as storage in a remote tank. If we compare the heaters with a heat exchanger and equipment with an integrated tank, then we can say about the first that they allow you to use water to supply to different points of water intake. It can be not only a shower, but also a kitchen sink.
If you have a question about how to make a shower in a bathhouse from a stove with a heat exchanger, then you should become more familiar with the principle of operation of such a system. It lies in the fact that cold water enters the heat exchanger and heats up, and then, under the influence of increased pressure, enters the storage tank, which is located at the top point of the system. After some time, the water in the tank heats up to the desired temperature, and when using the intake point, water under the influence of internal pressure enters the shower faucet.
If the sauna stove is heated, then the water will heat up and enter the combined heat exchanger. Here, heat is transferred to cold water. It will circulate in a closed loop, and the temperature will be maintained at a constant level during the operation of the water intake point. This system is universal, it allows you to use a bath stove or an electric water heater for heating water. They can work simultaneously.
If you were wondering how to make a shower in a bathhouse from a tank, you should remember that the water will only be heated from the furnace heat exchanger, while the combined water heater will turn into an ordinary storage tank. In this case, it must be disconnected from the electricity. In this case, the principle can work the other way around: if the heater is not heated, then the heat exchanger will act as an electric water heater. For forced heating, both heat exchangers can be connected. The energy consumption in this case will be less compared to a conventional electric boiler, because a sauna stove will also be used to achieve the goal.
Budget option shower
If you have a question about how to make a shower in a bath, then you can use the budget version of its device. At the first stage, an annular foundation is laid for this, on which pipes are laid on top, their diameter should be 5 cm. The number of products is three.
The next layer will be corrugated board, on it is a plastic pipe for a warm floor. In the central part, a hole with a square shape should be made with a side of 20 cm. A pit of 0.5 m is also required. In this case, the water will go into the ground itself, and the structure should be poured with concrete, on which tiles are laid after hardening. In this case, there must be a pipe for ventilation in the floor, and a normal sewer with a diameter of 10 cm is also suitable. It is led out onto the street through the wall.
Shower Finish
At the next stage, plastic panels are installed, the width of which is 20 cm. But the lining is unsuitable for such a room. The panels are mounted on a metal profile crate using self-tapping screws. Everything needs to be well waterproofed so that not even a drop of water leaks by accident. Now the pipe from the floor is connected to the heating in the bath, at the next stage you can proceed with the installation of the shower.
About the features of installing a flowing water heater for a shower
If you decide how to make a shower in a bathhouse in the country, then you can choose a flowing water heater, which has a compact size, so it does not take up much space. Such equipment is preferable if you have the opportunity to receive electricity stably, without surges and drops.
The cable for connecting to the network should be purchased separately, usually it is not included in the delivery package. For this, a three-core copper wire is used, the cross section of which is 2.5 mm 2 . The socket must be rated at 16 A, it must have grounding and a separate machine.
Specialist recommendations
On the reverse side of the casing, an electrical wire is supplied using a terminal. The housing is mounted on a vertical surface using fasteners. It is important to ensure the correct position of the device in relation to the vertical and horizontal. If the heating coil or any part inside is above the water level, this will cause equipment failure.
Attach a hose with a watering can to the outlet. A cold water hose goes to the inlet. If you decide how to make a shower in the bath, then on this we can assume that the manipulation of installing a flow heater is completed.
Conclusion
Bath in human life plays a rather important role. When asked whether a shower is needed there, steam lovers respond ambiguously. Each has its own reasons for this or that answer. If you answer in the affirmative, preferring to freshen up after the bath procedures, then you should think about what technology to implement the arrangement of the soul.