Restoration of wooden interior doors is a process that requires perseverance and accuracy. Any sudden movement may damage the web. To help the home foreman, we offer detailed instructions for the restoration of wooden doors.
general information
Usually, after the repair, the owners of the apartment begin to install new interior doors. But there are times when people cannot afford to buy them. Or the old doors fit perfectly into the interior. And changing them makes no sense. Then restoration of wooden doors will be the surest decision.
Inspect the canvases. What do they need - painting or a complete upgrade? If the doors have lost their marketable appearance, and deep scratches and cracks have appeared on their surface, then urgent measures must be taken. Of the tools you will need:
- joiner's knives;
- drill with conventional and pen drill ;
- spray gun;
- chisels of various sizes;
- wood putty ;
- hacksaw with small teeth;
- grinder.
Preparatory work
Restoration of a wooden door begins only after its surface has been cleaned of paint and varnish. For this purpose, you can use a grinder or a special wash. Choose any option.
Have you decided to remove the paint layer with a wash? It can be purchased at any hardware store. In order not to spoil the door leaf, you need to use a wash as described in the instructions. It is attached to the tool.
Do-it-yourself restoration of wooden doors involves not only removing old paint or varnish. It is necessary to process the surface of the cloth with sandpaper. Do you want the texture of wood to be brighter? Then use coarse sandpaper. Need a perfectly smooth surface? In this case, you need to process the door first with a large emery cloth, and then walk through it with fine-grained paper. Movement does not have to be sharp.
After sanding the surface of the door block , various defects (cracks, chips and knot marks) become noticeable. How to eliminate them? Restoration of an old wooden door involves the application of a special putty on all irregularities. Special accuracy is useless here. If the putty layer protrudes slightly above the recess (crack), then that's okay. It is necessary to wait for the complete drying of the product and level it with the door surface. Then we grind again using fine sandpaper. During this process, dust is generated. It can be easily removed with a damp sponge or a piece of cloth.
Door veneering
Want to experiment a bit? Then refuse to paint door leafs, and for decoration use veneer on a glue basis. How is it attached? Just glue the veneer to the door and heat it with an iron. This is a very painstaking job. It takes a little overexposure of the iron, and the material deteriorates. The door must be removed from the hinges and positioned horizontally. On top of the freshly glued finish we put a bag of fine sand. This measure will allow you to correctly distribute the load and get a flat surface.
Restoration of wooden doors involves the use of not only veneer, but also curly battens. With their help, you can achieve the effect of paneled texture. The finishing touch in the restoration of the door with veneer will be the application of a matte or transparent varnish on its surface. It will completely dry in a day.
Restoration of a wooden door: staining
Let's say that the option with veneer did not suit you. You decided to paint the repaired door. This can be done in two ways - manually and using a spray gun. Choose what suits you best.
Restoration of a wooden door with a spray gun is carried out in a well-ventilated area. Any novice master can easily cope with this device. The main thing is to hold it correctly and monitor the uniform coloring of the surface of the canvas. If you do not have a spray gun, then do not get upset. An ordinary brush and roller will do.
To ensure good adhesion of the paint to the door surface, it must first be primed. The next day, you can start painting. To avoid sagging and other troubles, remove the door from the hinges and lay it horizontally.
Would you like the canvas to retain its natural color and texture? Then use stain instead of paint. Today it is released in a wide range of colors. If you wish, you can make the door a little darker than it was. For uniform application of stain, a roller is used.
Coloring of the door begins with protruding elements and panels. Then go to large planes. When the entire door is finished with paint, you need to leave it alone until it dries completely. In rare cases, a single layer is sufficient. Repeat the door painting procedure if necessary. We are waiting another day. Now we can declare that the restoration of the wooden door is completed.
Rules for choosing a paintwork material
We go to the store where the goods for repair are presented. When choosing a paint and varnish material, it is necessary to take into account the operating conditions of the door and the type of wood from which it was made.
Want to give the product a new shade? Then purchase organic-based paints and varnishes. The most popular are alkyd, acrylic and polyurethane compounds. They are easy to apply and dry quickly.
If you want to preserve the natural beauty of wood, then transparent paints and varnishes will help to achieve the desired.
Finally
Do-it-yourself restoration of wooden doors was examined in detail by us. With strict observance of the instructions, you can perform the necessary work efficiently and in the shortest possible time.