How to clean polyurethane foam from hands? Polyurethane foam cleaner and home remedies

In the process of repair, people are constantly polluted with paints, construction dust, chalk, and other means. But they are washed off well, but other materials, such as construction foam, are very difficult to remove from leather or clothing. It is important to know how to clean the mounting foam from the hands and skin as a whole, in order to avoid discomfort, injury and poisoning by the chemical composition of the substance. There are several optimal options that have been tested by builders and recommended by the manufacturers of the foam itself.

Foam Precautions: Using Workwear

In order not to think how to clean the mounting foam from your hands, it is worth observing the rules regarding protection in the process of working with the material:

• It is necessary to use goggles and mittens with a high lapel.
• Clothing is selected specifically for one-time work with foam, since the composition is not washed.
• When working on the head must be present hat.
• For additional protection of yourself and surrounding objects, it is advisable to use a piece of film.

Even if you completely protect your skin and hands from getting foam, problems can arise. It is better to purchase a special tool for removing building material.

When is it easy to clean the foam from your hands?

When the mounting foam fell on your hands, it will be much easier and faster to remove it in such situations:

1. In the first few minutes after getting the product on your hands, it is easy to rinse the foam with warm water with the addition of any soap.
2. In the first minute you can remove the pollution with a rag, wipe the flakes thoroughly enough.
3. If you first apply a greasy cream or lotion to the skin, then removing the contamination will be much easier even after finishing work.
   

In many respects, the quality of cleaning depends on the composition and characteristics of the foam itself. It is impossible to remove high-quality building material for outdoor work in any of the above situations.

A special foam remover available in the store

The modern construction market offers a huge variety of sealants, installation tools. In this regard, there was a need for special products that can neutralize this substance.

Such is the foam cleaner, which has a strong action. Such a solvent is used to remove sealants of various actions. You can buy a product paired with foam.

The recommendations of professionals are as follows: building material and solvent should be the same company. A single manufacturer guarantees a quality impact on pollution.

Often solvents of this type are made in the form of an aerosol. This greatly simplifies the process of applying the substance to the hands and improves the effect. The cleaning procedure is carried out in a matter of minutes and guarantees a positive result.

An analogue of the solvent can be a cosmetic nail polish remover. It is necessary to apply liquid to a cotton pad and wipe the foam from the skin of the hands with light movements. Especially effective means is considered in the first few minutes after contamination.

Alternative methods of cleaning hands from building material

There are folk methods for cleaning the skin of the hands and other parts of the body from foam and sealant. Such funds are considered more gentle for the skin, but are not particularly effective. Another plus of folk inventions is the low price.

How to wash your hands after foam, using folk remedies and recommendations:

1. Heat vegetable oil to 30 degrees and apply to problem areas. Well rubbing your hands together, wash off the rest of the composition with a large amount of warm water. It is advisable to use soap or dishwashing detergent in the washing process.
2. A standard option will be washing your hands with flammable substances such as gasoline or kerosene, sometimes diesel fuel is used. The next step will be washing your hands with soap and water. With the same means, the gun is washed to apply foam.
3. Salt or sand can be good cleaners for the skin from foam. You need to take a handful of loose substance and a little wet. Rub your hands for several minutes and then rinse with plenty of water.

Polyurethane foam cleaner, according to popular recommendations, can be several options at the same time. The faster the product is used, the better the result.

Mechanical removal of any type of contamination with sealant or foam

If not, how to clean the mounting foam from your hands, or if it is not possible to perform cleaning by means, you need to use the mechanical method. Choosing is the most gentle way that does not harm the skin.

How to clean hands from foam, using a mechanical method? There are several options:

1. Apply oily cream to hands, body or face. The cream layer should be dense enough so that the surface is well saturated with the composition.
2. Soak the pumice for the feet in hot water and apply soap to the surface. It is advisable to use a liquid soap having a more delicate texture.
3. Rub the foam with a pumice stone to achieve the desired effect. The movements should be light and smooth so as not to hurt.
4. If you experience pain, it is worth stopping the action. Pain indicates that the epidermis is affected.
5. Wash hands with soap. Then rinse your hands again in warm water.
6. Apply hand cream. Wait a few minutes until the composition is partially absorbed into the skin.

Instead of pumice, you can use nail files made of acrylic or gel. Heel sanders are also suitable. The main thing is not to overdo it with mechanical stress, so as not to get wounds.

Removing dried foam from hands using proven methods

It’s easy to clean hands from fresh drops of foam, but it’s difficult to remove old spots. Before you clean your hands of dried mounting foam, you will have to try more than one tool and method. In this case, with a foreign mass on the skin will have to live for about 3-5 days, until the skin is refreshed and the "building mud" does not fall away.

First you need to break off as close to the skin as possible, cut off drops of frozen foam. After that, salt or sand is used to maximize the removal of excess particles of the building mass. After that you can use a solvent that will further clean the surface of the skin.

The penultimate stage will be washing your hands with plenty of water and detergents. The last point is the use of a nourishing cream to restore the microflora on the surface of the epidermis.

What methods are not recommended for pollution control

Looking for options on how to get rid of the mounting foam on hand, many find completely barbaric methods. It is worth thinking not only about the result of skin cleansing, but also about maintaining its integrity.

Do not use mechanical methods to remove foam from the hands. In particular, metal, hard brushes cannot be used; brushes made of metal; knives and other cutting items. Such effects can lead to damage to the skin, deep wounds.

Another popular method is the use of acids and harsh chemicals. But to predict the behavior of chemicals is almost impossible. As a result, deep and extensive skin lesions, poisoning, and respiratory problems can occur.

Useful tips and advice from professionals

After you have decided how to clean the mounting foam from your hands, it is worth considering other nuances regarding cleaning. Builders give the following recommendations and tips:

• Be sure to use hand cream at various stages during any cleaning process. This will significantly improve the condition of the skin.
• It is undesirable to use vinegar to clean the hands of foam. Acid can significantly damage the skin.
• It is better to pre-protect: rub your hands with cream, put on gloves, use a special device for applying foam.

If there is a lot of free time, then thin films of the remnants of dried foam can be removed with tweezers. This option is ideal if the areas are small and do not have severe skin lesions.