Clothing, no matter how high-quality it may be, gets dirty during wear. It is more difficult to clear a mink coat than trousers or a jacket. Fur products need careful handling and careful care. How to clean a mink coat at home without ruining it forever? The answer to this question can be found in the article.
How to clean a mink coat at home with sawdust
Of course, the easiest way to carry the product in dry cleaning, but this possibility does not always exist. How to clean a mink coat at home? This can be done using sawdust.
- Sawdust is better to buy at pet stores, they should be from maple, oak, linden or aspen. It is also necessary to stock up with medical alcohol.
- Sawdust is laid out in a compact container, filled with alcohol. All this must be thoroughly mixed. Some housewives prefer to use gasoline, but this is fraught with the preservation of an unpleasant odor.
- The fur product that needs to be cleaned must be laid out on a flat surface, for example, on a table. Contaminated areas are sprinkled with a prepared composition.
- The fur must be carefully wrinkled with your hands. Such actions will help the wood absorb all the dirt. Then the sawdust is removed, the fur coat is cleaned and combed with a special brush for fur products.
Shampoo
How to clean a mink coat at home without compromising its appearance. Sawdust is not as effective in dealing with old stains as shampoo.
- The right choice of product is the key to success, since it should not dry the skin of the product. A shampoo with maximum hydration is required. You also need to prepare a basin filled with room temperature water.
- It is necessary to pour about a cap of shampoo into the water, mix it by hand. Mixing is required in order to form a dense foam. Then you should fill another container with clean water without impurities.
- The fur coat is laid out on a flat surface. Next, you need to moisten the sponge in the solution and treat the area of the product that needs to be cleaned. Do not wet the fur strongly, and it is better not to touch the leather part at all.
- Then it is necessary to treat the same area with a rag dipped in clean water. Excess moisture is removed with a tissue or paper towel.
- The fur must be combed with a special brush or thin combs. Next, you need to hang the coat to dry on the shoulders. It is advisable that the product is in a well-ventilated area.
Sand
How to clean a mink coat at home with sand? The instructions below will help you cope with this task.
- It is necessary to collect river sand, rinse it several times under the tap. Then it is poured with boiling water, excess moisture should drain.
- The sand is laid out in a frying pan, warmed up over a fire to a temperature slightly above average.
- The fur coat, which needs to be cleaned, is laid out on a flat surface. Only the dirtiest areas are sprinkled with sand.
- The product should reach room temperature, then it can be removed. Be sure to comb your outer clothing after processing.
Talc
How to clean a white mink coat at home? Talc - a tool whose effectiveness is not in doubt. This product perfectly absorbs grease, excess dirt. To protect your hands you will need thin medical gloves.
- The fur product is laid out on a flat surface, all contaminated areas are sprinkled with talc.
- Next, slowly and carefully rub the product into the surface. Then the product is taken out to fresh air, shaken.
- It is easy to get rid of the remains of powder with the help of the hair dryer. Next, you need to comb the fur coat.
How to clean a light mink coat at home if talcum powder is not at hand? Alternatively, ordinary potato or corn starch can be used. Processing technology remains the same.
Semolina
To clean a white mink coat at home, you can also use semolina. This product absorbs dirt well, restores clothing shine. Also semolina perfectly copes with yellowness, which often forms on white fur products.
- The fur coat is laid out on a flat surface.
- Affected areas are sprinkled with dry semolina. Next, the product is rubbed by hand. This must be done carefully, avoiding strong pressure.
- The fur coat is thoroughly brushed off and combed. It is important that all semolina is removed.
How to get rid of stains
Almost all of the methods discussed above relate to dry processing. If the product needs to be rid of old stains, it is better to resort to the wet method.
- Soap solution. The pelvis will be filled with water at a temperature of about 30 degrees. A few drops of liquid soap are added to it, then the foam is whipped. The fur coat is laid out on the table, after which the contaminated areas are treated with a sponge moistened in a wet solution. The leather part is preferably not affected. Next, the product is treated with a damp cloth, combed.
- Gasoline for lighters. To clean a black mink coat at home, you can use gasoline to refuel lighters. This tool is effective in dealing with complex spots. It must be remembered that it can not be used to clean light coats. In gasoline, the clothes brush is wetted, then the item is combed. After processing, the fur coat must be left in the fresh air to get rid of the smell. The product should not be exposed to direct ultraviolet rays, as this will lead to stains.
- Table vinegar. This product will help not only to clean the fur coat, but also return to it the lost shine. Choose vinegar with a concentration of not more than 6%. The product is processed with a cotton sponge dipped in it. If the fur is long, you should move in height. If short - movements are carried out against growth. The cotton pad should definitely be squeezed out before use. Vinegar should not get on the skin of a fur coat.
Lining cleaning
The above describes how you can clean a mink coat at home. However, processing needs not only fur, but also the lining, which often suffers even more.
Method number 1
- To effectively clean the lining, it is necessary to tear off the fabric. It is important to do this carefully without causing harm to the material.
- The following is a machine wash.
- The choice of the washing mode depends on what material we are talking about. Silk and polyester fabrics need careful handling. The temperature should not be more than 40 degrees. If the lining is made of cotton, it may be taller.
- After washing, it is necessary to thoroughly rinse, this will prevent the formation of stains when dried. Then the fabric is ironed well, sewn back onto the fur coat.
Method number 2
- To tear away the fabric, not all are decided. Fortunately, it can be cleaned on a fur coat. Soap solution is best suited for this purpose.
- The lining is treated with a sponge dipped in a solution. The fabric is then cleaned with a clothes brush. Be sure to get it wet with a cloth, this will help remove residual moisture.
- The fur coat should dry at room temperature.
Precautionary measures
Thinking about how to clean a mink coat at home will have to be less frequent, if you do not forget about preventive measures.
- It is impossible to store the product when folded. If this has already happened, the outer clothing should be hung on a hanger. Some time later, the fur coat will stretch out.
- If the coat is wet, to dry it must be hung on a hanger. The product should dry at natural temperature.
- It is strictly forbidden to stroke the fur, no matter what mode is set.
- The fur coat cannot be washed, even when it comes to heavy soiling. This will lead to permanent deformation of the fur.
- Do not dry the product near the heater, battery, or open fire. It will also negatively affect the appearance of the fur.
Care
- Fur cleaning is carried out only when the need arises. If you do this too often, the pile will begin to crumble and lose its pristine structure.
- The fur coat cannot be stored in plastic bags, as this material electrifies the pile.
- The room where the product is stored is best treated with special insect repellents. The absence of pests is the key to the safety of things. You can also fill the sleeves of the product with a newspaper, as the printing ink repels insects.
- Fur items should not be kept next to each other.
- Spraying perfume on a fur coat is categorically not recommended, this can lead to the formation of spots. Even dry cleaning sometimes does not help get rid of such traces. Also, do not constantly carry the bag on your shoulder, on your hand. Otherwise, the fur will simply be erased.
- Minor contaminants are best removed by dry cleaning. Wet processing is necessary only when the fight against serious spots.