An ironing board is a very convenient accessory that facilitates the process of caring for garments. However, its storage is quite problematic. DIY ironing board made from improvised materials can be built-in or folding, which greatly facilitates its use.
Such a product can be independently integrated into a wall or partition. At the same time, it can be disguised as a common interior, and when folded, the board will not be noticeable. In order to build such a structure, you will need a grinder with a cutting ring, a drill,
sandpaper, a wood hacksaw, as well as a vacuum cleaner (for cleaning garbage).
DIY built-in ironing board is quite simple. It is necessary to take a piece of thick plywood and cut out from it an element of the necessary shape. A hole in the wall is cut along it.
In order for the board to be put and used, you will need a wooden beam support. The element will be attached to the wall using hinges. Do-it-yourself ironing board is cut very quickly. The depth of the niche for the product should be about 10 cm. The height and width of the niche should exactly repeat the dimensions of the board. After the hole is ready, it should be carefully treated with sandpaper and a primer mixture. In principle, in order to "cultivate" the opening, you can use drywall.
The self-made ironing board has a simple design, so even a layman can cope with the work. When attaching the product, you should also consider the height at which you will use it. Try to mount the board so that you are comfortable. After the main canvas is screwed, you should do the fastening of the support on which the board will be installed in the operating mode.
Do-it-yourself folding ironing board is constructed in the same way. If you want the home-made design to unfold, then it must be cut in the middle and twisted using loops. In this case, the board will take up much less space and will be quite easy to use.
To fully prepare the design for work, you should cut a piece of foam rubber, the size of which will correspond to the dimensions of the canvas. Next, we attach it to the plywood and tighten it with a fabric cover. The underside of the board can be glued with the same wallpaper that trimmed the walls of the room.
Please note that the board must be fixed in the wall with a special device. Otherwise, she can lean back on her own. Such a situation cannot be allowed. During operation, all wooden parts should be treated with an antiseptic, which will significantly increase the life of the tree.
In principle, an ironing board, made by yourself in compliance with all the rules, can last you a long time and will cost much cheaper than a store product. These are all the features of the construction of the presented design. Choose only high-quality materials for work. Good luck