Thermopot - a modern kitchen appliance, confidently gaining a place in the kitchens. This device allows not only to quickly heat water to the required temperature, but also to keep the liquid hot for several hours. How to clear the thermal sweat from scale? Due to its formation, more time is required for heating water, and energy consumption increases. Also, the liquid acquires an unpleasant taste. Therefore, the problem must be solved.
How to clean the thermal sweat from vinegar scale: instructions
Well-established natural products. They do not destroy the surface of the device, do not affect its functions and water quality. How to clear a thermal sweat from vinegar scale?
- To begin with, you should prepare a solution. It is necessary to dissolve 50 ml of vinegar in a liter of water.
- The device is filled with solution. Then the liquid must be boiled.
- Next, turn off the thermal sweat. Water should remain in it for several hours. It is recommended that you keep the lid open at this time.
One procedure is enough so that nothing remains of the formed scum. However, the method has a significant drawback. We are talking about a specific vinegar aroma, which is problematic to bring out. After cleaning, you will have to rinse the thermal stream several times with clean water. But with the help of acetic acid, it is easy to destroy even old deposits.
Lemon acid
There is another universal product that is actively used for cleaning kitchen appliances. It is ideal for devices that are afraid of aggressive substances. How to clear a thermopot from a scum of citric acid?
- For the procedure you will need 25 grams of funds, 25 grams of baking soda. Water and a soft sponge are also needed.
- It is necessary to pour water into a thermal sweat, add soda. Then the composition must be brought to a boil, and then wait another half hour.
- Next, the soda solution should be poured. Then the thermopot is filled with water in which a bag of citric acid is previously diluted. The liquid must again be brought to a boil, wait another half hour.
- Then you need to drain the water and allow the appliance to cool. Now it is very easy to get rid of scale; it easily settles from the walls of the device. It is convenient to use a sponge to remove it.
- The final stage is flushing the thermal sweat with clean water. It is better to do this several times.
Soda
Descaling soda ash is also popular. However, you need to understand that this product will not cope with old deposits. To begin with, you should dissolve a tablespoon of soda in a liter of water. The resulting solution is poured into an electrical appliance, brought to a boil. Then you need to wait a while - about an hour.
After cooling the liquid, it must be poured. What follows is the removal of residual calcareous deposits. This can be done with a soft sponge. It is strongly not recommended to use sharp objects, metal brushes. This will not only not help get rid of scale, but will also lead to malfunction of the device.
If necessary, the procedure is repeated. The main advantage of soda is the absence of smell.
Coca-Cola and other carbonated drinks
Many housewives struggle with lime deposits with carbonated drinks. Pepsi, sprite, Coca-Cola - in the shops there are many options. How to descale thermal sweat with a carbonated drink? It is necessary to pour the product into a thermal sweat, and then boil the liquid. It is better not to close the lid, as soda can escape. If the desired result is not achieved, the procedure is repeated.
Preference should be given to colorless drinks, for example, Sprite. When using Coca-Cola or Pepsi, you will have to clean the device from dark dye.
Apples and pears
How to get rid of scale in a thermal sweat? Some housewives prefer to do this with apples or pears. The secret of these fruits lies in their acid content.
- First you need to fill the thermal stream with water.
- Then you need to add apple slices or apple peel into it.
- The liquid must be boiled, then cooled.
- Next, pour water, after which the procedure is repeated.
Pear can be used in a similar way. It should be remembered that this method is suitable for preventive purposes rather than for fighting old formations. Pear and apple are absolutely harmless to thermal sweat. Therefore, they can be used twice a week. This is true when the water is very poor and limescale forms after the first boiling.
Cucumber pickle
How to descale thermal sweat when it comes to small contaminants? You can remove them from the internal surfaces of the device using cucumber solution. Vinegar is present in the composition of this product, which is the key to its effectiveness.
- Thermopot should be filled with brine to the maximum mark.
- This is followed by boiling the liquid. It should take about 20 minutes.
- After this, the device should be rinsed several times with running water.
The main disadvantage of this method is the possible preservation of the cucumber smell. But to get rid of it, a few boils are enough.
Raw potatoes
How to clear the thermal sweat from scale at home? Young potatoes will help to cope with this task. This product contains ascorbic acid. Thanks to this, with the help of potatoes you can get rid of lime deposits.
The thermal sweat should be filled with liquid. The peel must be cleaned of sand and dirt, and then lowered into water. This is followed by boiling. Ascorbic acid will soften the formation. After this, the scale can be removed with a soft sponge. In difficult cases, you should leave water in the device overnight, and then boil again. Then the device is washed with water. Potato is good in that after its application there is no unpleasant odor.
Household chemicals
How to descale thermal sweat for those who do not trust folk remedies? At their services are modern household chemicals, which can be purchased in specialized stores. It is good in that it allows you to get rid of old deposits even the first time. An example of such a product is the well-established Top House scale descaler based on citric acid.
Whatever product is selected, a standard set of actions is required.
- First you need to fill the device with water. Then, a cleaning agent is diluted in it.
- The solution should be brought to a boil and then left briefly.
- Next, the thermal sweat is washed with a detergent.
Before using a specific tool, you should definitely familiarize yourself with the instructions that are attached to it. Aggressive substances present in the product may be hazardous to certain parts of the thermal stream. In no case should you overexpose the product.