How to insert glass into the interior door - step-by-step description, recommendations and reviews

In interior doors, decorative details are often used for decoration. Often, glass inserts are used for this. But sometimes the dismantling of this part is required. How to insert glass into the interior door is described in the article.

Removing damaged glass

How to replace the interior glass in the doors with your own hands? This work begins with its removal from the door leaf. More difficulties arise if the glass insert is cracked, since it should be removed so that it does not crumble into parts.

It is advisable to carry out all work after removing the door from the hinges and laying it on a flat surface. If this is not possible, then you need to open the door and secure it securely in the lower part so that it does not stagger during operation.

On cracks you need to stick in several layers of transparent tape on two sides of the glass. It is necessary that the undamaged part is captured with tape. This procedure will help to fix the glass and will not allow it to crumble into parts during dismantling. According to reviews, this work can be done independently.

For her you will need:

• gloves, preferably rubberized, with a fabric base;
• broom and dustpan;
• chisel;
• thick paper;
• little hammer.

Features of the procedure

All work should be carried out with gloves, this helps protect your hands from damage. A future procedure for removing cracked glass includes the following steps:

1. It should be determined how the glass insert is fixed to the canvas. It can be brought in through the end or fixed with the help of glazing beads.
2. If the glass is fixed through the end, then the door still needs to be removed from the hinges. It can be removed only through a special hole.
3. If the insert is fixed with glazing beads, then with the use of a chisel and a hammer they need to be slightly moved to the side. It is not necessary to completely eliminate these fastener parts.
4. Then the glass is slowly removed from the canvas. It is advisable to perform this procedure together, especially if the insert is large. One person needs to hold the glass in the area where the cracks are located, and the second - carefully remove it from the door.
5. It is necessary to remove sawdust, door putty or sealant from the grooves.

According to reviews, the preparation procedure facilitates installation. After dismantling, the insert must be disposed of by wrapping it in prepared paper in advance. If the glass breaks off during operation , sweep it indoors. There will be no particular difficulties during the work period. It is important to immediately prepare all the necessary material and perform the procedure without rushing.

Check the condition of the gum, which is located between the glazing bead and the glass itself. If it is damaged or torn, it must be replaced with a new one. After elimination, you should carefully read the instructions explaining how to insert glass into the interior door.

What is used?

Only after dismantling is the glass replaced in the interior door. How to replace it? Many have difficulties with the choice of material for replacement. It should be borne in mind that sometimes it is still possible to seal broken glass with:

1. A special decorative film if a crack or chip is small. It is glued to all glass so that the door has a harmonious look.
2. Fiberboard sheet. This option is temporary and can be used until the selection of a new glass. To improve the appearance, it is advisable to stick a decorative film on the temporary insert.

According to reviews, these options are temporary. They can be used for some time, and then install a new and high-quality glass.

How to replace?

If the damage is severe, they usually choose the option to completely replace the glass. There are several options for this:

1. Ordinary glass. This material does not include its own decor, it is transparent, affordable and has a low cost. If you choose this option, it can be decorated in different ways.
2. Organic glass. It is durable, so breaking it is not so easy, but scratches appear quickly. You can get rid of this drawback with a decorative film, which will be a decoration of the door and protection from minor damage.
3. Decorative glass. This replacement method is considered the most stylish, beautiful, but also expensive. The insert of this glass has an unusual appearance and high strength. But you should spend a lot of time choosing the right picture. Some types of this material cannot be installed at home.
4. Tempered glass has high strength, fire safety and sound insulation.

There are a lot of materials for replacing glass. But you need to choose those that are most suitable for the technical characteristics and appearance.

What do you need for work?

How to install glass in the interior door? The procedure begins with a measurement. It is important to accurately determine the size of the insert. Carrying out measuring work, it must be borne in mind that the glass itself should not fit tightly into the grooves, otherwise it will burst due to strong pressure.

To install a new insert, you will need:

• sealant;
• small nails;
• a hammer;
• glue;
• rubber insert.

If you have the necessary fixtures, you can get the job done in a quality manner. The result of the procedure will remain for a long time.

Work process

How to insert glass into the interior door? The procedure itself is not complicated. A step-by-step instruction for replacing glass in the interior door is as follows:

1. The sealant is applied on one side of the door leaf into the grooves for the glass.
2. A new insert is inserted into the gum, and then installed in the grooves. Bonding glass and wood without this rubber seal is possible, but this installation is unsafe, and glass is unreliable.
3. Then again apply the sealant, but on the other side of the door.
4. After 5 minutes, previously removed glazing beads are installed. If necessary, they must be qualitatively fixed using special cloves.
5. The door leaf should be left motionless for several hours. During this period, the entire structure will be fixed inside the door.

Glass is glued into a wooden door not only with sealant, but also with special wood or universal glue. It is necessary to apply sealant, but this work is performed after installing the glass. It is advisable to carry out actions after removing the door from the hinges. This installation option is simple and suitable for glasses of a usual form.

The technology of work is also used for other types of inserts, which can be in ordinary doors, sliding or collapsible. If the glass is located in the side door, and it is difficult to remove the canvas, then you need to fix it there so that it does not move during operation.

Replacement in the king door

How to insert glass into the interior door of the collet type? In comparison with a usual cloth, the collet includes bars-amplifiers that qualitatively fix the structure in the doorway. The insert is replaced as follows:

1. The door is removed from the hinges with a screwdriver and with the preliminary removal of the plug. Loosen the bolts from the inside of the hinges.
2. The door leaf is laid on a flat surface, which is located above the floor level.
3. Using a ruler or chisel, you can remove the remnants of the plugs, which are located at the edges of the canvas.
4. Fasteners are removed with a screwdriver.
5. With a hammer and a wooden block, you need to disconnect the tsar along the perimeter from the door itself. Movements should be carried out from the bottom up. It is necessary to begin the elimination of the drawer from the place where the fasteners were.
6. When the drawer is disconnected, it is necessary to carefully remove it from the canvas and remove the cracked glass from the grooves. For this work wear gloves.
7. Then the glass is measured and a replacement is acquired.
8. A gasket is put on the new insert and inserted into the grooves.
9. The drawbar is set in place.
10. Then you can collect and install the entire canvas in reverse order to the analysis of the structure.
11. Replacing the inserts in the drawer door is considered a complex process, compared with the work that is performed on ordinary interior doors, so it must be approached responsibly.

So the installation of glass in the interior door with your own hands is carried out. With a careful approach, this work succeeds without difficulty. According to reviews, this can be done at any door.

Staggered Glass Repair

Glass does not always crack or break. Sometimes it just staggers a lot and makes unpleasant sounds. Then you need to repair the interior door with glass. It will be possible to solve this problem without replacing the decorative insert in several ways:

1. It is necessary to buy a special “sanitary” sealant, which is applied in a thin strip into the cracks that appear between the insert and the tree.
2. Matches of 1 pc. inserted into the corners of the glass panel.
3. Instead, an acrylic putty is applied, which is applied to the corners of the insert.
4. Small pieces of cork are generously lubricated with universal glue and inserted around the glass perimeter into the slots.
5. It is necessary to remove the glazing beads, apply sealant to the glass, and install them again from above, but closer to the decorative panel.

These methods of eliminating noise and mobility in the doors can get rid of the problem. As the reviews confirm, they will not take much time.

Installation methods

There are some features of replacing glass in the interior door.

1. Insert setting when size is saved or increased. In the first case, cracked or broken glass is removed, and a new one of the same size is attached to this place. This work is simple and quick, as evidenced by numerous reviews.
2. In the second situation, after dismantling the damaged part, the image of a new one is drawn with a pencil on the door leaf, then the measurements are taken. Then you need to buy glass of the right size. The necessary shape of the hole is cut out with a hacksaw, special grooves are made in it, and then installation is carried out. This work requires careful measurements and caution, otherwise there is a risk of spoiling all the material.
3. Replace the insert using quarters. The implementation of this work has been described previously. In this case, quarters are called glazing bead parts.
4. Complex is the non-standard replacement of the insert. It is performed when the glass is inserted without glazing bead.

When installing a new decorative part, the work is as follows:

1. It is necessary to eliminate the plugs and fasteners at the end of the door.
2. The door is removed from the hinges and placed on a horizontal surface.
3. Remove the side of the door. Usually you only need to slightly pry it with a chisel or thin iron ruler. In the appeared aperture there will be noticeable glass that needs to be taken out.
4. A new part is installed on a free area, and then a side bar is fixed.
5. The completion is the assembly and hanging of the door.

There is another option for installing glass. When it is implemented, LED bulbs are mounted in the grooves for insertion, which light up when touched to the glass. Keep in mind that this work can only be done by professionals.

Price

Where to insert glass in the interior door? It is carried out in many construction companies. How much does it cost to insert into the glass in the interior door? The price can be different, it depends not only on the company, but also on the type of material. For example, inserting clear glass costs about 1900 rubles per square meter. meter.

Conclusion

Zameta glass in the door is not a very difficult job. You just need to take your time and clearly follow the advice in its implementation, then success will be guaranteed. And in the absence of experience, it is better to call a specialist.