In order to use the grinder, masters quite often acquire a bed. Such an addition to the tool can be purchased or made independently.
Should I buy a bed
Beds for grinders are of different production, for example, Chinese. It is preferable not to purchase such elements, since they are very short-lived, because they are made of sheet steel using stamping technology. After the tool starts to work, slight vibrations make the machine unstable, and therefore dangerous. It is best to make such a rack yourself, while you will be sure of its quality and reliability.
Safety regulations
If you decide to start manufacturing a bed for grinders, then first you need to analyze all the existing designs that exist on the market. Most often you can find beds that are designed for 125 mm discs: using a 230 mm grinder is already dangerous in tandem with such equipment, since quite often there is a need to remove the protective covers. Among other things, such racks for grinders suggest that the master will stand directly opposite the disk - this makes you neglect safety rules. If you decide to design the machine yourself, then you need to use exclusively high-strength materials for the protective casing. A frame for a do-it-yourself grinder is often made using plexiglass so that the screen does not interfere with the view, but it is forbidden to use materials that can be destroyed by mechanical stress. It is preferable not to make structural elements using improvised materials, but to buy finished products that are able to provide the highest degree of protection.
For the reason that the Bulgarian is considered one of the most popular tools in the household, it is preferable for her to make the most reliable bed, as it will be used in tandem with the tool very often. The independent manufacture of this supplement to the grinder justifies the fact that the factory-made beds are quite expensive. Moreover, it is not possible to use the unit for traditional cutting operations. It is for the reason that the cutting tool involves the ability to perform many functions, the inventive stand for the grinder. Beds for grinders can be used only if necessary, in other words, the main tool can be used in different ways, while the bed can be left for a while. It is important to remember before starting production that the mount for the equipment should be located in a place that is specially designated for this, which will prevent injuries. In order to manufacture such a tool, it is necessary to have some knowledge, experience, as well as a certain set of materials and tools.
Preparatory work
Do-it-yourself grinder beds are made of different materials. Among them, wood or metal can be distinguished, which depends on the scope. Most often, profile steel pipes are used to make the bed. This material will be able to provide the most increased strength and reliability of the elements. However, this solution has certain disadvantages, which are expressed in the fact that it will be necessary to use electric welding. As an alternative solution, profiles can be used at the base of the rack, but in this case the problem remains. It will be necessary to use a welding machine that is not always available. However, if you think about it, then almost all welding work can be replaced using bolts. To install them, it will be necessary to prepare holes by drilling. This option will be most suitable, because the master will have an excellent opportunity, which is expressed in the fact that the machine can be disassembled if necessary. This method is recommended to be used if the frame for the grinder with your own hands will be made of wood.
If you decide to use wood, then when choosing lumber for this purpose, you should carefully control the quality of the material used - it should be strong enough, resilient, and well-dried.
Manufacturing Features
If you will make a home-made bed for a grinder, then you must first prepare a drawing of the future rack. To do this, you will need to study the principle of the model, which you can find on sale. It is important to understand how to properly lock the tool. When drawing up a drawing, special skills are not required. It is enough to accurately determine the dimensions and transfer them to paper. After the drawing is ready, you can begin to prepare the material. If you decide to use profiled pipes, you will need to cut the workpieces and make the necessary holes. Before proceeding with the cutting of the pipe, it is necessary to clarify the dimensions, which will eliminate the damage to the material.
Wizard tip
If you are going to make your own stand for a grinder, the drawings of which you have already prepared, it is preferable to use wood if you do not want to spend a lot of time and effort on manufacturing. However, it must be remembered that the process will be easy, but the machine will turn out not so durable compared to metal. You can select only those materials that during operation will not be subjected to deformation.
Manufacture
A homemade bed for the grinder, the drawings of which were prepared, should be based on a platform that is mounted on the surface of the desktop, while bolts should be used. This will eliminate vibration. In order to realize the simplest design, it is necessary to use steel, as well as corners. The design will be very simple. It is important to supplement the stand with a hinged handle that will fix the tool. On this we can assume that the design is ready.