A washing machine allows you to save the effort that is spent on hand washing. Many people do not know how to wash by hand at all, so breaking a washing machine is a disaster for them. This article can help if you plan to do the repair of your Samsung washing machine.
Breakdown reasons
Self-repairing a Samsung washing machine is a good way to fix a disaster without leaving your home. Repair must begin with finding the cause of the problem. If you can find the reason, then you will be able to plan further actions.
The drum does not rotate
The main reasons that could cause this problem are:
- A foreign object between the tank and the drum that impedes movement. It is easy to detect this failure immediately after occurrence. Most likely, the drum will rotate, but with stops until it stops completely.
- Faulty drive belt. It can be either sagging and loose belt, or its break due to wear.
- Lack of engine functioning.
- Faulty electronic module.
To repair a Samsung washing machine with your own hands, you need to take turns to check all the reasons, starting with the most obvious.
Possible methods for solving this problem:
- If it turns out to spin the drum of the washing machine manually, then nothing is stuck in the gap between the tank and the drum. In the case when the drum is stationary or barely moving, you need to get rid of the interfering object. In extreme cases, you can remove the drum.
- If the drum rotates freely, damage to the belt may result in damage to the belt. You can check it by removing the top cover of the machine and gaining access to it. In the event of a malfunction, it will have to be replaced.
- If the belt is in good condition, the problem may lie either in the engine or in the electronic module. Both the first and the second cannot be repaired by people who do not have the necessary skills, so it is best to consult a specialist.
If none of the methods presented above worked, then the repair of the drum of the Samsung washing machine should be entrusted to the master.
Increase washing time
Few people notice how much time the wash is already running, but there are times when it becomes obvious that the wash lasts longer than it should be. In such a situation, you should think about such malfunctions as:
- Broken tubular electric heater (TEN).
- Electronics breakdown, clogged filter and the like malfunctions that reduce the speed of work.
- Incorrect water connection.
It is very difficult to make a repair of the Samsung washing machine with your own hands in the event of a breakdown in the heater. The same thing with small electronics, so in both of these cases it is better to contact the master. But competently and according to the instructions you can connect the equipment without it, if you have confidence in your abilities.
Poor water heating
The main reason for slow heating of the water is the failure of the heater. Its life cycle directly depends on the number of washes at high temperature.
The main causes of failure:
- Water hardness too high.
- Wear.
- Short circuit.
As already mentioned above, it is better to entrust the repair or replacement of the heater to professionals. However, not only he can be responsible for poor heating of water. The reasons also include the following:
- Damage to temperature sensors.
- Broken electronics.
In both cases, you can find the problem and repair the Samsung washing machine with your own hands only by completely disassembling the machine. The main electronics unit can be found by removing the front panel. The board must be checked for swollen capacitors or dark spots. If dark spots are found, then you need to change the board or contact the master.
Water is not typed into the machine
It happens that the repair of the Samsung washing machine is necessary due to the fact that water does not get into the drum. In such a situation, do not immediately call the master. It is possible that you can fix the breakdown manually.
The reasons are as follows:
- Water supply hose clogged or tangled.
- The feed tap is closed or closed.
- The filter is clogged.
In these cases, you can fix the machine yourself. It is only necessary to check the water supply system from start to finish. You need to start by fully opening the water supply valve, and finish by checking the hose and filter. If necessary, they must be replaced.
Washing machine leaking
Even high-quality assembled Samsung cars can begin to leak. If a leak is found, it is first necessary to hand over the machine under warranty, and if it is over, you can try to fix the problem yourself.
To repair the washing machine with your own hands in case of water leakage, you need to:
- Find the place where water leaks out. There are two most popular options: hoses or rubber cuffs.
- If leakage is detected during hose inspection, replace this hose.
- In the case when the hoses are serviceable, you need to check the integrity of the rubber cuffs. They also often cause leakage. If the problem is in them, then the solution is to replace the seal with exactly the same.
In order to constantly keep the washing machine in working condition, you need to adhere to several rules: use not very hard water, give the machine a rest after each wash, use high-quality powder, use the washing modes at high temperature as little as possible and follow the requirements of the operating instructions.
If you still had to face a problem, then you should first think about calling the wizard, but if this option is not possible in the near future, you can try to repair your washing machine, following the advice of this article.