It will not be a secret for anyone that each owner of his own home tries to create in it all the necessary conditions for the most convenient pastime. One of the most important conditions for a comfortable stay for a modern person is the availability of a working sewer system. In some cases, due to the appearance of blockages, it can fail. This situation requires urgent decision-making aimed at eliminating the problem. How to eliminate a blockage in the toilet? Let's try to figure it out.
Causes
Let's dwell on this in more detail. Before you learn how to clean a blockage in the toilet, if it is blocked, it is worth considering the main causes of the problem. Usually trouble happens at the most inopportune moment. There are many circumstances that can cause this inconvenience. Congestion in most cases occurs as a result of the ingress of foreign objects into the toilet. Most often it is rags, sanitary napkins, diapers and even toys. The reason may lie in the improper installation and design of the sanitary ware. Perhaps the problem is damage to the sewer.
A blockage can occur both immediately after the installation of the equipment, and after a certain time. The reason may be the salt deposits accumulated in the system. Over time, they completely block the flow of water and cause an emergency. Sometimes the place of occurrence of blockage is extremely difficult to detect. The problem may also be caused by errors made in the design of the system. Over time, the pipes sag. As a result, areas appear in which water stagnates. Clogging can also occur when using low-quality adapters and mounts. Unpleasant consequences are caused by non-compliance with the parameters of pendants.
What causes blockages?
This issue should be given special attention. Surely many were faced with such a nuisance: the toilet clogged. What to do? Ways to solve the problem may be different, but first you need to understand why it arose. Experts do not recommend lowering any foreign objects into the sewer. The only exception is soluble toilet paper. Other items can simply clog pipes. The leftovers and waste remaining in the cooking process should not be flushed into the toilet. The same rule applies to tea brewing. Sewer pipes can clog such particles like cement.
In no case should construction waste be drained. This is guaranteed to lead to blockage. Leftovers should also not be flushed into the toilet. Over time, they can cause quite severe blockages. It is not recommended to wash off diapers, tights, sanitary napkins and tampons, rubber products, bags and other garbage.
We determine the place of blockage
What you should pay attention to? How to eliminate the blockage in the toilet? The first thing to do is to establish where the focus of its occurrence is located. To do this, you will have to study the structure of the sewer riser in the kitchen and bathroom. Keep in mind that blockage can be common. For residents of an apartment building, the problem in some situations becomes a joint. If the toilet is clogged in a private house, then the reason can be located outside it, for example, in the place where the pipes go into the cesspool, or in the gap where the local sewage is connected to the city. To correctly determine the site, you will have to thoroughly examine the sewage system of your home. The first sign of general blockage is the inability to drain water from the bathroom. If the liquid passes well while turning on the taps in the kitchen sink and flushing the toilet, then you need to look for a place of stagnation.
Folk methods
How to choose the most effective and not spend a lot of time? So, how to eliminate blockage in the toilet? At the first signs, you can try to use simple folk methods. The main thing is to act quickly and immediately. With a simple blockage caused by a small accumulation of sediment on the pipes, the following alternative methods can be used:
- Boiling water. To eliminate stagnation in the toilet you will need to boil a bucket of water. Its contents must be very quickly poured into the toilet strictly at right angles. Water after such a procedure should begin to slowly drain. The procedure should be repeated several times if necessary. These simple steps will help you get rid of mild blockages.
- Baking soda. To eliminate simple blockages, you can use such a simple product as soda. To do this, pour half a pack of loose powder into the toilet. After a couple of minutes, you can try to drain the water. Soda is by nature an active alkali. It can remove blockage and ensure normal operation of the equipment.
- Lemon acid. A solution for cleaning pipes with this component is prepared as follows: in a liter of boiling water, 1-2 packets of citric acid are diluted (about 40 grams). If the system uses metal pipes, the solution should be poured directly into the drain. It is better not to pour cool boiling water into plastic pipes. Wait until the solution cools down to at least 70-80 degrees. Acid will create an aggressive environment that can destroy deposits on pipes. It usually takes 10-20 minutes to eliminate blockage with this method. The procedure can be repeated if necessary.
- Soda + vinegar + boiling water. To use this method, you must first remove water from the toilet. You can leave only a small amount directly near the drain. There you need to pour half a pack of soda. Try to push it as deep as possible. After that, you need to pour in a glass of vinegar. It is better to use a 9% solution. 20 minutes later, simply fill the drain hole with boiling water and try to drain the water. If the toilet is equipped with a connecting corrugation made of thin plastic, then boiling water should not be used. In this case, you need to use hot water.
How to eliminate blockage with mustard?
There is another simple folk method that allows you to easily and quickly deal with blockages. It is based on the use of mustard. For its implementation, it is necessary to heat 10 liters of liquid. 5 teaspoons of mustard are diluted in water. The resulting composition is poured into the toilet. In a few minutes you will only need to drain the water. If you fail to clean the toilet at a time, the procedure should be repeated.
Use of chemicals
Today, a large selection of various means for eliminating blockages is presented in store windows. Especially popular are "Mr. Muscle", "Mole", "Flop", Tiret. How to eliminate blockage in the toilet using these formulations? Before proceeding with any actions, you need to carefully study the instructions. Remember the safety precautions. Many products contain aggressive substances that, when in contact with the mucous membranes or skin, can cause serious harm to your health. Therefore, using such products, be sure to wear rubber gloves. Also, when using these compositions, the room should be carefully ventilated.
How to clean the clogging of pipes in the bath, sink or toilet, using special tools? Pour the required dose into the drain. You can determine the dosage by reading the instructions. After a while, simply rinse off the substance with a stream of water. Ready-made products also help from blockages in the sewer system. However, it is worth considering that potent drugs can cause serious harm to metal or plastic pipes. It is not recommended to use several products at the same time, as this can cause an unexpected chemical reaction.
Mechanical methods
So what is their feature? What to do if a toilet clogged? How to clean the blockage without resorting to the services of specialists? If the problem is caused by a foreign object, then most likely you will have to use mechanical methods. They are pretty simple.
Here is some of them:
- Cleaning with a plunger. Slight clogging can be eliminated by using a plunger. It should have a cone-shaped nozzle. Its diameter is at least 10 cm. It is recommended that the toilet be filled with water before work. The plunger must be placed in the drain hole. Holding it by the handle, it is necessary to make strong pressing several times. Then sharply pull out the plunger. The procedure must be performed several times until the blockage is completely eliminated.
- Using a bottle. Pretty interesting method. How to eliminate a blockage in the toilet with a plastic bottle? The principle of operation in this case is used the same as in the method of cleaning with a plunger. First you need to prepare the bottle: just cut the bottom.
- The use of "dolls." This home-made device is a bag of fabric filled with sand. A long rope joins him. Such a device is lowered into the toilet, holding the rope in his hands. After that, they click on the drain and wait for the flow of water to entrain the device. Next, you just need to remove the doll from the toilet by pulling the rope. The heavy weight allows her to break through the resulting congestion.
- Torso cleaning. To eliminate clogging, you can use a cable. This product has a long hollow axis and is highly flexible. Its handle can be rotated. At the end of the axis is a spiral process. It is attached to the cable with a flexible tube. The end must be completely lowered into the hole. After that, by slow movements, rotating the handle of the device, the cable must be pushed into the shutter. When the procedure is complete, just rinse the system with hot water. Such actions will help to quickly deal with a blockage in the sewer. It is best to use a special cable, which can be purchased at a hardware store. The main thing is to choose its diameter and length correctly.
Now you know what to do if the toilet is clogged, how to clean the sewer at home using mechanical methods.
Film use
How to eliminate a blockage in the toilet yourself? There is a rather interesting way. It is suitable for removing foreign objects from the drain hole. To use it, you need to take a wide tape. The toilet circle is wiped dry, after which strips of adhesive tape begin to be glued to it. The main thing is to glue them tightly to each other so that a continuous coating forms. After the entire toilet bowl is pasted with tape, you need to drain the water. It will be enough to make only a few strong clicks on the makeshift cover, and you can easily break through the blockage. You just have to remove the tape from the seat. Also, to eliminate blockage, you can use a specialized film.
Professional help
How to remove blockage in the sewer? If none of the methods presented has helped to achieve the desired result, then you should seek the help of specialists. They will help you find the right solution to the problem. Companies that service sewer systems have equipment that can quickly eliminate blockages of any complexity.
Prevention
What can be done to never again look for the answer to the question of how to eliminate blockages in the toilet? There are a number of preventative measures that help forget about blockages forever. Firstly, all plumbing equipment in the house should be used only for its intended purpose. There should not be any foreign objects in it. Secondly, professionals advise regular use of specialized chemicals to prevent the formation of congestion in pipes. In addition, it is recommended to clean once a week using boiling water or plunger.
How to eliminate blockage in the toilet? The recommendations of experienced professionals will help you easily and simply solve the problem. However, in difficult cases, it is better to immediately contact professionals. Most blockage problems can be avoided by regular preventive measures.
Conclusion
Many probably faced such an unpleasant problem as a clogged sewer. How to clean a blockage in the toilet yourself? There are several ways you can use this. If we are talking about a fairly simple blockage, then you can try folk remedies. Sometimes, compositions based on soda, citric acid and vinegar do very well with deposits on the walls of pipes. For more complex cases, special chemicals are intended. When using them, the main thing is to follow the instructions on the packaging. To eliminate heavy blockages caused by the ingress of foreign objects into the sewer, you will have to use mechanical methods. It can be either a simple plunger or special professional devices.